Reboot needed to access Polyglot 3x and Wrong Uptime on Page

[junkycosmos]

Just had what seems to issue others have hit where they could not login to the Polyglot 3x web page at https://192.168.1.53:3000/dashboard - was getting error 503 as if my pass was bad / tried resetting via admin consul but no effect

after searching on how to gracefully restart eisy to no avail I yanked power for 15 seconds then plugged in again  (some easier answer maybe ?)  .. 

Good news is that after 2 mins I could login again with my credentials of admin/admin . (same I had been using 2 weeks ago last I started testing out my new eisy) .. 

Interesting news is that my portal page shows uptime of roughly last time I was using eisy / kinda expected to see this at 2 mins vs 2 weeks since the eisy was just unplugged for 15 seconds .. 

 

 

[junkycosmos]

ah ok so I figured out that the "up time" is purely a java counter so that pulled from my browser cache after restart // even though I had closed browser and thought I cleared cache .. but this cleared after a few page navigations on the PG3 / now shows correct uptime of 21 mins .. 

 

Would still be nice to post proper way to restart PG3 when you cannot login / or is yanking power really best way ???

 

Also .. next newbie Q, please.. how to set proper time in PG3 (the log files are all 2 hours off) was the ISY had been due to default time zone which I change 10mins back .. however seems updating time zone (time offset) in ISY does not flow over to PG3 ?

thx

[tazman]

On eisy 5 button presses reboots the device and 6 button presses shuts down the unit where the light will turn red and you can safely unplug the unit or press the button again to restart.