Jump to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

EISY NVMe SSD configuration failure.

Featured Replies

Posted

Added a 500GB NVMe drive to my EISY and was following the instructions here: https://developer.isy.io/blog/eisy-way

I ran the:       sudo fl.ops setup.nvme.boot   command.

The process fails on this step:  zpool attach -f zudi /dev/mmcsd0p3 /dev/nvd0p2
with the following error:    cannot attach /dev/nvd0p2 to /dev/mmcsd0p3: can only attach to mirrors and top-level disks

I tried it twice, once trying to create a 150GB extra partition, the second time not adding any partition.  The results were the same each way.

My udx Version is   : 3.5.7_4

nvmecontrol devlist  shows the following:

 nvme0: CT500P310SSD8
    nvme0ns1 (476940MB)

 

Any ideas what else I can try? 

17 minutes ago, another tom said:

Any ideas what else I can try? 

I'm sure some here have experience with the process, but not sure about resolving. The best bet on this more advanced process with the eisy might be best handled directly with UDI via a support ticket. 

https://www.universal-devices.com/my-tickets

Please be sure to post back the resolution so it might help others if they run into this situation. 

Guest
This topic is now closed to further replies.

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.