BamBamF16 Posted January 31 Posted January 31 Does anyone use these with IoX that can give me.some.advice? They have been a hot.mess for me.to get working correctly. They seem to program fine but then don't work as expected. Mostly the indicator lights. But sometimes other things as well. With some scenes the indicator lights are perfect. Other scenes and the indicator light flashes when pressed a couple of times then off. Now all the buttons are set as toggle on so Tha shouldn't happen I have yet to figure out the backlight settings. They don't appear to do anything. It's like the isy thinks the devices are programmed but in reality they aren't fully programmed. Quote
Techman Posted January 31 Posted January 31 Are you running an ISY994, an EISY or a Polisy What are your firmware and UI versions? Quote
BamBamF16 Posted January 31 Author Posted January 31 Here ya go Also of note, these keypads have no loads attached. Just using them for scenes. Quote
paulbates Posted January 31 Posted January 31 (edited) I haven't used the i3 keypad, but having used the PS-01, some surprising behavioral tweaks are under the flags 'node' associated with each device. The out-of-the-box flags can vary and odd sometimes. Out of my ~20 PS-01s, a number of them were set to 'Disable RF'(???). I also had to factory reset a couple initially because of behavioral problems, but have been fine since. Note that my experience is that ,'Restore Device' does not put flags back on the device. Edited January 31 by paulbates Quote
BamBamF16 Posted January 31 Author Posted January 31 I have factory reset them multiple times. Then restore device. They actually work better PRIOR to the restore device. And the devices work great when the scene is activated by the AC. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.