Beaker Posted February 20 Posted February 20 Recently I was prompted that there was an update. I found this a bit strange given the platform is no longer supported. Logged into the box as I waned to see what the specific update was. It turned out to be and IOS update. Seemed odds but I went ahead and executed the update via the console. All seemed good but then I discovered that the upgrade failed and it was still showing that an update was available. I reviewed the log and found that the the install was failing mid way. I decided to reboot the system to see if that would clear it up; no luck. The system now only powers on with all three lights initially on and then the second and third turn off. The far left stays on solid, never flashes and there is no beep indicating that it has booted. At this stage the system is powered on but unresponsive and not responsive to SSH and ping attempts. I feel I have a brick on my hands but I was hoping there might be some light at the end of the tunnel. Any Help/suggestions would be great. Cheers, Ken.
paulbates Posted February 20 Posted February 20 Polisy is still supported AFAIK. I've seen posts in the recent upgrade threads that it took some people multiple boots. Here's one that is thorough and prescriptive on things to try 1
bob123 Posted February 20 Posted February 20 My polisy bricked also after the upgrade. I've been working with support (Michel) to try and get it back to life. You should file a support ticket. 1
Solution Beaker Posted February 20 Author Solution Posted February 20 Thank you bob123 and Paulbates. Have a response from Michel and moving forward with a fresh SSD image. Will also be adding a new SSD for good measure. Cheers, Ken. 3
bob123 Posted February 21 Posted February 21 Good luck with the SSD drive. Michel worked his magic tonight and got my polisy back in the game. 2
Beaker Posted February 24 Author Posted February 24 All went well. Back up and running. Now just re implementing my monitoring customization. 1
Recommended Posts