Attempting to create a "THEN" to set the dim setting for an Inlinelinc in a program. All I see are On, Off, Faston, Fastoff, a lot of Beep Durations, Backlight levels. How do you set the particular dimming level?

 

I have the ISY-99i and the device is an InlineLinc dimmer, brand new, v.38.

 

Mitch

If you look here

http://forum.universal-devices.com/viewtopic.php?t=4784

you will see I had a problem with doing a Status on an In-LineLinc also. You problem is probably related to the same bug which should be fixed in the next release. Until then if you add your In-LineLinc manually you will see there are 2 type of In-LineLinc available.

 

1st [01.02] (2475D) In-LineLinc Dimmable

2nd [01.1A] (2475D) InlineLinc Dimmer

 

Auto select seems to use the 2nd one which didn't work for me. I you manually select the 1st one it may work better.

Thanks very much! This worked.

 

Mitch

 

If you look here

http://forum.universal-devices.com/viewtopic.php?t=4784

you will see I had a problem with doing a Status on an In-LineLinc also. You problem is probably related to the same bug which should be fixed in the next release. Until then if you add your In-LineLinc manually you will see there are 2 type of In-LineLinc available.

 

1st [01.02] (2475D) In-LineLinc Dimmable

2nd [01.1A] (2475D) InlineLinc Dimmer

 

Auto select seems to use the 2nd one which didn't work for me. I you manually select the 1st one it may work better.