October 16Oct 16 @srjacob FYI - removed the .zip file you added and just put the image and log file. Usually better not to use .zip files unless they're huge. Not many will download .zip files for risk of threats inside them. Images are fine to upload as an image and .log files are fine to upload. Typically the exclamation points means IoX is not able to communicate with the device. Close admin console and make sure the plugin is setup correctly. Check in the plugin (web access) that the nodes are found and correct. Maybe restart the plugin. Then re-open admin console and see if the problem is corrected.Remember if you have admin console open and you change something in the plugin you must always restart the admin console for most changes to be read. That's why it's often suggested not to have both open at the same time. Lastly, please include what device and firmware (actual version number) you're using. It might also help to include the plugin version number. Be sure to give actual numbers and not just say "current firmware/plugin" as that's not helpful months down the road if somebody finds this post and thinks they have a similar issue, but firmware or plugin versions might have changed.
Tuesday at 06:27 PM3 days The red exclamations are because as shown on your screen "Node Server Errors" = 1. The debug.log doesn't show the error since it rolls over each night. Is there an error shown on the PG3x Page for this plugin?
Thursday at 01:15 PM2 days Author Where exactly do I find "Node Server Errors"? If I do find it (if you tell me where it is), what do I change it too?Where do I find errors on the PG3x page? I did a screenshot of the pg3x page, and have attached it.
23 hours ago23 hr On 10/23/2025 at 6:15 AM, srjacob said:Where exactly do I find "Node Server Errors"? If I do find it (if you tell me where it is), what do I change it too?Where do I find errors on the PG3x page? I did a screenshot of the pg3x page, and have attached it.The Node Server errors should show up on the PG3X page for the plugin.I don't see a screenshot of the PG3x ELK Plugin page, only a screenshot of the Admin Console.If you restart the plugin do the errors get cleared?
13 hours ago13 hr 10 hours ago, Jimbo.Automates said:he Node Server errors should show up on the PG3X page for the plugin.I don't see a screenshot of the PG3x ELK Plugin page, only a screenshot of the Admin Console.If you restart the plugin do the errors get cleared?When I restart the plugin, the errors (?) do NOT get cleared. I uploaded the config page error (the only one I know about), but the forum didn't accept it.Please tell me EXACTLY where I can find the PG3X page that gives the errors. I have no idea what you are referring too.I have been running the old ISY994 with the Elk module for years, without any problems.
2 hours ago2 hr 11 hours ago, SJacobson said:When I restart the plugin, the errors (?) do NOT get cleared. I uploaded the config page error (the only one I know about), but the forum didn't accept it.Please tell me EXACTLY where I can find the PG3X page that gives the errors. I have no idea what you are referring too.I have been running the old ISY994 with the Elk module for years, without any problems.Looks like you found the page, that's the PG3X page showing the error, and I see you attached the log, I'll try to review this today.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.