Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dusk/Dawn Sensors. Is there a max?

thruster999
in ISY994

Featured Replies

Posted

Hello

 

I have ten 2420M motion sensors in my home serving 10 different rooms.

 

All of them work when it comes to motion and all of them report their status, as On/OFF, in "Current State" on the ISY-99i's Main device list table.

 

However

 

Only 5 of them report the "Current State" as either On/Off for Dusk/Dawn. The remaining 5 report nothing (blank) and I can't use this status for programming.

 

Is the ISY-99i limited to only being able to read 5 Dusk/Dawn sensors?

 

btw the 5 that don't work are all located near an access point and near other sensors that work. All sensors have both jumpers 3 and 5 set to on.

 

Thanks

If the motion sensors are the newer type with the trim pot adjustments then check the dusk/dawn settings thru the ISY. If the dusk/dawn is set for 0 the motion sensor will never send a d/d On.

 

Tim

  • Author

Hi

 

All of the Motion Sensors are Rev 2.0

 

Thru the ISY all of the Dusk/Dawn settings, including the one that are reporting an ON/OFF, are set to 102.

Guest
This topic is now closed to further replies.
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.