I've had a boatload of issues with backlighting and today one thing led to another and many switches needed to be reset. I reset them to factory and then reloaded them into the eisy. A single lone switch was Ok , but scenes were all in need of reprogramming. I got the main backbone done, then I noticed that the scenes when triggered by a KPL button were not setting SWL's t the proper level. Can someone tell me how to program the ramp rates and brightness for each SWL in a scene. Also I thought by simply entering ramp/brightness in a SWL would tell the switch how to perform when the switch rather than a KPL button was pushed.

Let me try and elaborate.

I have a scene, "NIGHT" which I push button "F" and the scene has a half dozen SWL's in it. Some dimmers, some just switches. I have set the ramp and % brightness in the scene under each unit. I push the button and they all go to rogue settings.

In addition I have a dimmer mated with a KPL button that when the button is pushed would likely go to 33%. It goes full bright even though I have the level set to 33%.

I know I'm missing something simple

Figured it out. I think along with the many "glitches" I've experienced in the transition from 994 to eISY, I think that some of the Scenes also were corrupted in the move. I deleted this particular scene and rebuilt it and just like that it works. Moral of my story is a complete audit of all the remaining scenes and programs. This whole thing started with the backlighting not responding. That issue required each and every switch needing to be factory reset, deleted from eISY and then re-added back in. After that the backlighting adjustments worked perfect. I'm appreciative that everything works now, or will as soon as I get through the rest. I'm thrilled with my new eISY, and it's worth the minor inconvenience of these issues.