Found a periodic crash and connection issue ; as well updated some dependabot complaints.

What's in this release

1. Discovery fix — tolerant setup/devices parser for partial TaHoma records

2. Dependency updates — aiohttp>=3.13.4, requests>=2.33.0, pyasn1>=0.6.2,

pyoverkiz>=1.13.0,<2.0.0

Let me know if you find anything or want anything.
(especially @Guy Lavoie , I think its only you and I using this thing , which is fine as I use it daily.)

Edited yesterday at 03:36 PM1 day by sjenkins

4 hours ago, sjenkins said:

Let me know if you find anything or want anything.
(especially @Guy Lavoie , I think its only you and I using this thing , which is fine as I use it daily.)

Yup, just installed the update. It's been working reliably, installed on one of my test Polisys. I have two shades that I lower partially during the day, every day, with this. My main (eisy) controller is still using the original Somfy plugin, which works with the URTSII device, for now. One handy feature of the Somfy plugin has is that you can define a travel time parameter (in PG3 configuration and/or as a program command) for each shade, which is the time it takes (in seconds) for a shade for a fully open or close. Then you can send commands to open or close by a certain percentage, which will activate it for the percentage of the time of a full travel. This could be a nice feature to add to the Tahoma plugin.

If

Time is Sunset - 45 minutes

And $s_shade_close_early is not 1

Then

Set 'Somfy Controller / Shade_02_Shade_bedroom' Set Travel Time 20 seconds

Set 'Somfy Controller / Shade_02_Shade_bedroom' Open 15%

$s_Shade_bedroom = -1

Else

- No Actions - (To add one, press 'Action')

Where did you get your Tahoma, the Somfy website shows every controller as out of stock. I'm currently using the ZRTSI which was discontined a long time ago.

7 minutes ago, Techman said:

Where did you get your Tahoma, the Somfy website shows every controller as out of stock. I'm currently using the ZRTSI which was discontined a long time ago.

Well if you know me well, I get everything used! Ebay, marketplace...UDI coffee shop 😆 etc. I originally got my URTSII literally for free, and the Tahoma Beecon for a low price.

@sjenkins , did you update your docs to indicate that your plugin workes with both the Tahoma switch and the Beecon?

@Guy Lavoie I did not.

Later tonight

I will put the timer on the todo; doesn’t sound too hard. Good idea.

@Techman , if we can get you a controller we might expand this plugin’s usage by 50% , 🎉

Edited 18 hours ago18 hr by sjenkins

7 minutes ago, sjenkins said:

@Techman , if we can get you a controller we might expand this plugin’s usage by 50% , 🎉

Join the ranks, we're recruiting!

Thanks, I sent an email to Somfy to ask what's going on with the unavailability of their controllers

ok without a version bump I added Somfy Beecon compatibility into the readme and the Store description. Gave it a weasel word of "some" as I'm not sure of perfect alignment.