I migrated from an ISY994i with both Insteon and Z-Wave devices that all worked fine in the 994i, to an EISY after saving the Z-Wave and ISY backups and loading them into the EISY. Some of the Insteon switches work, but most don't. In one case there are two identical switches side by side on the same power line, one works, the other shows a node error. I have a mixture of different types of Insteon devices and there seems to be no pattern in which work and which don't. The Z-wave devices seem to work on the EISY although I've only played with a few.

I'm using a the same serial PLM I used on the 994i and can go back from the EISY to the 994i with everything plugged in exactly the same way in both, reload the same backup file into the 994i I used on the EISY and everything works perfectly, Insteon and Z-Wave. Returning to the EISY setup, it behaves the same. Some Insteon devices work, most don't. I've tried doing multiple Query and Write Changes to the devices with no improvement.

All the packages are shown as the current versions. I tried upgrading to the Beta version 1.4.8 and it's mostly the same although one switch that didn't work in 1.4.6 now works in 1.4.8. Most Insteon devices still don't work. I'm using an Ethernet connection for both the 994i and EISY.

This is from the About page.

UUID

00:21:b9:f2:72:43

OS Version

14.4-RELEASE-p6

Node.js

v24.16.0

Memory

20%

1.5 GB / 7.7 GB

Storage

5%

4.2 GB / 91.0 GB

Edited Sunday at 10:53 PM4 days by RDoc

Try removing power from both the PLM and the eisy. Wait about 30 seconds then power up the PLM. Wait 30 seconds then power up the eisy.

Let me know if that fixed your issue

Edited Monday at 01:30 AM4 days by Techman

Techman: I tried that an there's no change. I also listed the PLM links and the links to the failed node devices are in the PLM list. I also tried manually switching the light on and when I did a query on the switch in the eisy-ui it correctly showed the switch as on. However, when I tried turning it off in the eisy-ui I got the same note failure and it didn't turn off. It seems to be connected and can be queried but the EISY can't control it.

Try doing a restore device on one of the failed devices to see if that corrects the issue