starmanj Posted October 6, 2011 Posted October 6, 2011 I want to show my wife that the keypads can change LED brightness by doing a simple 1-second interval to increase brightness from 0 to 15 using ISY. All I can do with current firmware is set it to a value, not increment +1 every second. Am I missing something? I've had the system a few days. Starmanj
Michel Kohanim Posted October 6, 2011 Posted October 6, 2011 Hi Starmanj, Unfortunately you cannot increment/decrement LED brightness values. They will have to be listed one at a time in the Then block. With kind regards, Michel
Hurting2Ride Posted October 6, 2011 Posted October 6, 2011 something like this: If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Wait 1 second Set '- Hallways / WHF-Entry Lights' On 0 / Off 0 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 0 / Off 2 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 0 / Off 4 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 0 / Off 6 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 0 / Off 7 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 1 / Off 0 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 1 / Off 3 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 1 / Off 5 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 1 / Off 0 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 1 / Off 7 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 5 / Off 0 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 5 / Off 1 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 5 / Off 3 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 5 / Off 5 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 5 / Off 7 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 10 / Off 0 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 10 / Off 1 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 10 / Off 3 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 10 / Off 7 (Backlight Level) Wait 1 second Set '- Hallways / WHF-Entry Lights' On 10 / Off 5 (Backlight Level) Wait 1 second Else - No Actions - (To add one, press 'Action')
Recommended Posts