Jump to content

How to do calculated program


starmanj

Recommended Posts

Posted

I want to show my wife that the keypads can change LED brightness by doing a simple 1-second interval to increase brightness from 0 to 15 using ISY. All I can do with current firmware is set it to a value, not increment +1 every second. Am I missing something? I've had the system a few days.

Starmanj

Posted

something like this:

 

If
  - No Conditions - (To add one, press 'Schedule' or 'Condition')

Then
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  0 / Off 0 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  0 / Off 2 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  0 / Off 4 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  0 / Off 6 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  0 / Off 7 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  1 / Off 0 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  1 / Off 3 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  1 / Off 5 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  1 / Off 0 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  1 / Off 7 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  5 / Off 0 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  5 / Off 1 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  5 / Off 3 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  5 / Off 5 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On  5 / Off 7 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On 10 / Off 0 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On 10 / Off 1 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On 10 / Off 3 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On 10 / Off 7 (Backlight Level)
       Wait  1 second
       Set '- Hallways / WHF-Entry Lights' On 10 / Off 5 (Backlight Level)
       Wait  1 second

Else
  - No Actions - (To add one, press 'Action')

Guest
This topic is now closed to further replies.

×
×
  • Create New...