wpmjones Posted June 23, 2012 Share Posted June 23, 2012 The light in our master bathroom is on a ToggleLinc Dimmer (2466DW). During the day, I want the On Level to be 65%. At night, I'd like the On Level to be 35%. Is there a way to programatically change the On Level on a particular device? I would probably use sunrise and sunset as conditions and just change the On Level. I just couldn't find an option for it. Thanks! Link to comment
LeeG Posted June 23, 2012 Share Posted June 23, 2012 Sure. Define an ISY Scene with the ToggleLinc as a Controller. Use the Program Adjust Scene statement, selecting the ToggleLinc switch for both the In Scene and Set parameters. This combination changes the Local On Level (or Local Ramp Rate) of the ToggleLinc. If From Sunset To Sunrise (next day) Then In Scene 'ICON Dimmer 1' Set 'ICON Dimmer 1' 35% (On Level) Else In Scene 'ICON Dimmer 1' Set 'ICON Dimmer 1' 65% (On Level) Link to comment
apostolakisl Posted June 24, 2012 Share Posted June 24, 2012 I have wondered if there is any long term affect on re-writing the programming on a switchlink 2x/day 365 days per year doing this. Comments? Link to comment
wpmjones Posted June 24, 2012 Author Share Posted June 24, 2012 Thanks Lee! That is not an option I was familiar with. I've got it set up and it looks like it is working. I love the quick and knowledgeable responses on these forums! Link to comment
Recommended Posts