MikeB Posted February 18, 2008 Share Posted February 18, 2008 Having a problem here trying to make a KPL v1.65 secondary the controller of a fairly large scene (7 responders). Can anyone confirm that they are using a KPL v1.65 secondary to control a scene containing at least 7 responders? If so, are you having any issues? In my setup, the devices respond reliably when the KPL secondary is pressed, but the button flashes - I believe indicating that a confirmation response wasn't received from one or more of the responders. I can eliminate the issue by dropping down to 4 responders, but it seems if I add a 5th+ responder the flashing starts. It doesn't seem to matter which 5th+ responder I add, so I don't think it's a problem with a particular device. I'm still troubleshooting here, but would like to hear some input. Thanks! Link to comment Share on other sites More sharing options...
Guest Posted February 19, 2008 Share Posted February 19, 2008 Having a problem here trying to make a KPL v1.65 secondary the controller of a fairly large scene (7 responders). Can anyone confirm that they are using a KPL v1.65 secondary to control a scene containing at least 7 responders? If so, are you having any issues? In my setup, the devices respond reliably when the KPL secondary is pressed, but the button flashes I have one KPL 1.65. The F button controls only two devices and it flashes occasionally. Since the devices go on and off like expected, I don't consider this being and issue. G, and H buttons on this KPL control 7 devices, as well as each other, but I do it through the ISY. No flashing is seen on those buttons of course. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.