jmed999 Posted July 27, 2012 Share Posted July 27, 2012 What does the electricity tap under configurations do? Does anyone have a tutorial on how to set it up and what the different tabs under the electricity tab means? Link to comment
Michel Kohanim Posted July 27, 2012 Share Posted July 27, 2012 Hello jmed999, It all depends on what product you have and what modules are installed. At a high level, you can configure ISY to communicate with Brultech Energy Monitors as well as our soon to be released energy monitor. If you have a Zigbee version, the communications will be over Zigbee. If your utility allows you to communicate with your Smart Grid meter, and if you have 994i ZS then you can see consumption data from your utility meter. With kind regards, Michel Link to comment
Robermax Posted August 1, 2012 Share Posted August 1, 2012 I'm very interested in an energy monitor. How can I keep informed about your upcoming product? Bob Link to comment
Michel Kohanim Posted August 2, 2012 Share Posted August 2, 2012 Hello Robermax, Please do be kind enough to register for our newsletter at http://sales.universal-devices.com/my-account . 994i ZS series has already been certified and we should be ready for shipment by the end of this month (if not sooner). With kind regards, Michel Link to comment
ekuzmack Posted August 6, 2012 Share Posted August 6, 2012 Is there an upgrade program for the 99i to the 994? Link to comment
Michel Kohanim Posted August 6, 2012 Share Posted August 6, 2012 Hi ekuzmack, Yes, there is. Please do be kind enough to check our store front. With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.