jmed999 Posted January 17, 2013 Posted January 17, 2013 My allowable depletion says its, 0.165" and the irrigation requirement is 1.6214" in the climate tab. The program's irrigation requirement says if the irrigation requirement is >0.5" then the sprinklers are to start. For some reason the irrigation module never triggers my sprinklers to start. Any ideas what the problem could be? Thanks!
arw01 Posted January 17, 2013 Posted January 17, 2013 can you manually turn on the valves through the ISY directly?
jmed999 Posted January 17, 2013 Author Posted January 17, 2013 can you manually turn on the valves through the ISY directly? Yes and I can run the sprinkler program through the ISY. It's just that the irrigation module doesn't initiate it.
Michel Kohanim Posted January 17, 2013 Posted January 17, 2013 Hi jmed999, If you go to Program Summary, is the irrigation program you are referring to set to True? And, what is the last runtime? With kind regards, Michel
jmed999 Posted January 18, 2013 Author Posted January 18, 2013 I have the following programs for my irrigation system... Sprinkler Run 1 If Time is Sunrise - 2 hours And Module 'Climate' Irrigation Requirement is 0.5 inches And Module 'Climate' Temperature > 34 °F Then Run Program 'Sprinkler Run 3' (Then Path) Else - No Actions - (To add one, press 'Action') Sprinkler Run 2 If Time is Sunrise - 2 hours And Program 'Sprinkler Run 1' is False Then Run Program 'Sprinkler Run 3' (Else Path) Else - No Actions - (To add one, press 'Action') Sprinkler Run 3 If - No Conditions - (To add one, press 'Schedule' or 'Condition') Then Send Notification to 'My e-mail' content 'Lawn Sprinklers Started' Set 'Sprinkler System / 9-Side (at Road)' On Wait 15 minutes Set 'Sprinkler System / 8-Side (Near Driveway)' On Wait 10 minutes Set 'Sprinkler System / 7-Back Flowers and Trees' On Wait 2 minutes Set 'Sprinkler System / 6-Back Near Pond' On Wait 10 minutes Set 'Sprinkler System / 5-Back Right and Bushes' On Wait 15 minutes Set 'Sprinkler System / 5-Back Right and Bushes' Off Set 'Sprinkler System / 4-Front Bushes' On Wait 5 minutes Set 'Sprinkler System / 2-Front Middle' On Wait 10 minutes Set 'Sprinkler System / 1-Front Left (Near Tina)' On Wait 15 minutes Set 'Sprinkler System / 3-Front Right (Near Driveway)' On Wait 15 minutes Set 'Sprinkler System / 3-Front Right (Near Driveway)' Off Irrigation - Cycle Complete Send Notification to 'My e-mail' content 'Lawn Sprinklers Stopped' Else Send Notification to 'My e-mail' content 'Lawn Sprinklers Didn't Run'
jmed999 Posted January 18, 2013 Author Posted January 18, 2013 Hi jmed999, If you go to Program Summary, is the irrigation program you are referring to set to True? And, what is the last runtime? With kind regards, Michel All 3 programs were false the last run time (this morning) and it was way over 34 degrees. Any ideas? Thanks!
LeeG Posted January 18, 2013 Posted January 18, 2013 The If requires a specific 0.5 inches and only 0.5 inches. Is that what you wanted? If Time is Sunrise - 2 hours And Module 'Climate' Irrigation Requirement is 0.5 inches And Module 'Climate' Temperature > 34 °F
jmed999 Posted January 18, 2013 Author Posted January 18, 2013 The If requires a specific 0.5 inches and only 0.5 inches. Is that what you wanted? If Time is Sunrise - 2 hours And Module 'Climate' Irrigation Requirement is 0.5 inches And Module 'Climate' Temperature > 34 °F No, I wanted it to be greater than 0.5". Shoot I didn't even see that mistake. That's the problem! Thanks for your help Lee! Problem solved.
Recommended Posts