Skip to content
View in the app

A better way to browse. Learn more.

Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

JimTurner

Members
  • Joined

  • Last visited

Everything posted by JimTurner

  1. JimTurner replied to KenUD2's topic in UD Mobile
    <!-- Complex static Z-Wave editors --> <editors> <editor id="ZW_CONFIG"> <range uom="111" min="-128" max="127" /> <range uom="112" min="-32768" max="32767" /> <range uom="113" min="-8388608" max="8388607" /> <range uom="114" min="-2147483648" max="214748647" /> <range uom="107" min="0" max="255" /> <range uom="108" min="0" max="65535" /> <range uom="109" min="0" max="16777215" /> <range uom="110" min="0" max="4294967295" /> </editor> <editor id="ZW_WAKE_INTERVAL"> <range uom="58" min="0" max="16777215" /> <range uom="45" min="0" max="279620" /> <range uom="20" min="0" max="4660" /> </editor> <editor id="ZW_UNLOCK"> <range uom="25" min=0 max=6 nls="IX_UNLOCK" /> </editor> <editor id="ZW_OFF_0_ON_100"> <range uom="78" subset="0,100" /> </editor> <editor id="ZW_OFF_ON_UNKNOWN"> <range uom="78" subset="0,100,101" /> </editor> <editor id="ZW_OPEN_CLOSE_UNK"> <range uom="79" subset="0,100,101" /> </editor> <editor id="ZW_DIM_PERCENT"> <range uom="51" min="0" max="100" /> <range uom="25" subset="1" nls="IX_PCT_OPT" /> </editor> <editor id="ZW_OL"> <range uom="51" min="0" max="100" /> </editor> <editor id="ZW_RR"> <range uom="58" min="0" max="127" /> <range uom="45" min="0" max="127" /> </editor> <editor id="ZW_MLS_DIR"> <range uom="25" subset="0,1,3" nls="IX_MLS_DIR" /> </editor> <editor id="ZW_LOCK_STS_2"> <range uom="11" subset="0,100-102" /> </editor> <editor id="ZW_LOCK_STS"> <range uom="11" subset="0,100,101" /> </editor> <editor id="ZW_ERR"> <range uom="25" subset="0,1" nls="IX_ERR" /> </editor> </editors> Here is the response XML...
  2. JimTurner replied to KenUD2's topic in UD Mobile
    Yes. I tried that already, and it gets the same error as the APP. This page contains the following errors: error on line 19 at column 27: AttValue: " or ' expected Below is a rendering of the page up to the first error.
  3. JimTurner replied to KenUD2's topic in UD Mobile
    So I had a port on the remote connection config that was interfering - cleared that. Looks like this works. I still get the first error on the screen shot no matter what I do.
  4. JimTurner replied to KenUD2's topic in UD Mobile
    I get no errors other than a timeout on the "Test System on Remote URL". However I get the errors in the attached screen shot when doing a refresh/sync:
  5. JimTurner replied to KenUD2's topic in UD Mobile
    My issue is the same only different. I have enabled Certs through the my.isy page, and added the module through the Java front end on my PC. Trying to set this up for remote access, I see my portal with the MAC address and it shows green on the IOS app when testing the connection. However, I get a timeout and it never connects. What am I missing?
  6. Poked around and did not find an answer. I have an ISY994 along with an Eero hub on a UPS. My issue is, I had a power failure that extended past the UPS support time. When power was finally restored, the ISY was inaccessible by any means. I am assuming it booted before the network did, and was not able to obtain a DHCP address. I unplugged the ISY and plugged it back in, and then it was addressable. I am wondering if setting a static IP in the ISY would solve this? If so, do I need to set the Subnet Mask, gateway, and DNS boxes? Eero uses 192.168.7.x IP scope. Basically I want to fully auto-recover on power restore without any manual intervention. Thanks!
  7. Hi all, I am trapping APC UPS events to send myself emails on electrical noise, power failure and power restore. Wondered if there is a way to trigger a program on - say - electrical noise event. The program would initiate "turn off" commands on select z-wave and/or insteon devices to lessen the impact of electrical storms (that are so prevalent where I live) to expensive equipment. Thought about hitting the ISY with a URL run program command but could not find the right syntax for that. Already lost an Air Conditioner and Security camera during last storm. Thanks! ~jimt
  8. Ok, thanks! I will check that out. Could have been named something clearer like "DeviceEvent" but I am late to the design / requirements party!
  9. Hi all, Tried to search for this, but got nowhere. In HouseLinc (yeah, shoot me!), it would know that a device button was set from off to on or vice versa. I have not seen where or if that can be accomplished in the ISY. What I want to do is trigger a timer in a program that turns off a given Insteon device at some interval (say 2 hours) after it is manually turned on at the device itself. That possible on this platform? Thanks! jimt

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.