SteveT

@DennisC- if you are still stuck, I would suggest opening a ticket. I had a similar problem as you, was receiving this error message in the logs: pkg pg3 must be upgraded to 3.1.17_1 , and it did not load. There is mechanism to force the upgrade if you are comfortable with ssh into polisy or eisy, but my directions may be a little old. Not sure if the 6 button press above would also achieve the same. Steve

@Goose66 - I am about to make this jump to polisy from a RPI - what is NodeLink? thanks, Steve

So looks like this was resolved for me in v5.5.5. I reduced the communication speed to 50, and there is now an association node which can be used for the tilt sensor. I guess it is old, and comms were too quick as Chris J had stated on a related support ticket. Steve

hmm - that was one of my guesses - I was hoping there was an option for read/only and r/w accounts that have limited access to variables, etc. I will try using with REST API - BTW , when its created, i dont see in A/C, is that your experience? Steve

I am able to get in to the AC console , just after being logged on not able to create any accounts, there are slots for ..10?

I am having problems creating users - the user seems to be created, but when trying to logon to the Admin console , it fails. Am I missing something? thanks, Steve

Thanks @MrBill - definitely a clever work-around, I have done this while i did my migration to Polisy. Seems like something relatively easy to implement in the mobile UI as they already have the friendly export done in the system. Just show the text for the program selected! Steve

I like the view program and edit feature, but it seems like most of my programs don’t fit the model for editing. Frequently I would just like to view, and fix something in the console later - is it possible to just have a viewable programs even if it cannot be edited? Something simple — thanks, Steve

Yikes ! Thank you @MrBill for some ideas. Its all about the programs you miss- honestly. The node servers can be deleted from the Polisy side as well I assume - and I assume restored via a regular backup if we think PG2 is a less reliable method.. What about this? - Perform a backup of Polyglot on rpi -and- document settings. - Perform a backup of IOP (Polisy). - Turn off RPI Node servers. - Delete 1,2,3 node servers from the IOP (Polisy). - Try restore from PG2 to Polisy performed on RPI. ?? thanks, Steve

Reading through the posts, was unable to find a specific procedure to migrate my rpi hosted Polyglot to Polisy. I figured i would backup in the PG2 web interface (BACKUP) on the rpi (running on the typical :3000), and restore the created .ZIP on the PG2 on Polisy, and restart via the web UID. No go. Not even an indication the backup "took". On the Polisy PG2, even before the RESTORE, it seems to have detected unmanaged node servers in slots 1, 2,3 where my backup would restore to. What procedure have others followed? What am i missing? thanks, Steve

So I am back up and running on Polisy, but still no luck with the Ecolink tilt device, still only see Assoc only, Wakeup, and a node with Battery. Hopefully an update in the future to solve..

To clarify @johnnyt- this is when saving . Loading the console up is not bad for me- I am sure they will ID and fix.

@MrBill - yes, java is configured w/the config above. I have the problem on Windows and on my Mac as well. @vbphil - agreed - ISY994 is faster! Everything else in the console is pretty decent, I don't notice any delays except when saving or deleting programs. I did a few tests, and it definitely seems slower if a ZWave device is in the program! 😮

Has anyone experienced saving programs on 5.5.4 is slow? Its between 3-5 seconds per program for me - something new, it has been really quick in the past. Running on Polisy w/Insteon + ZMatter. Steve

After doing the restore, my Polisy w/Zwave ran for a while, and then I received a similar error. Looking further into it, the Zwave ZMatter board was no longer recognized. I powered down, rebooted, nothing. Perhaps the same happed with your h/w. You should open a ticket, I am waiting for their response. Steve

Back to square 1 - looks like some h/w issue with the Zwave Matter board surfaced. Polisy doesn't detect it anymore! As part of my backout, I had to re-add the Ecolink back to ISY994, and it was flawless. It adds the initial device, and then continues the interview process almost immediately to discover the additional nodes. Stick with what works! I am going to open a ticket w/UDI - h/w problem most likely - at least I was able to boot up the ISY994 and revert. Positive note. Steve

Thanks all - still no dice, sitting next to the polisy, and only 3 nodes. The only difference I can think of is I have an older model, the exact model # on the back is TILT-ZWAVE2 on the back - Trying a policy power down, maybe the zwave board is "remembering" something - no idea.

@Mr. B - thanks for the info - glad you have it working! Do you know the Ecolink model # you have, I tried the exclude / include, but only get Wake up and Association nodes in addition to Binary sensor. I came from ISY994/500 board. The model on the back seems to be Model: TILT-ZWAVE2 . No button for association on the board, just a tamper switch that is pushed down by the cover. thanks, Steve

Has anyone had success getting the correct zwave nodes to display w/the ZMatter board for the ecolink tilt sensor? I recently migrated from ISY994/ZW500 board where all was good. Seems like its not being detected properly. The odd thing is the sensor shows an ON event when I select basic in the zwave button/sensor detect, but not OFF. There is also no status node for inclusion in programs either. I have the sensor without the association button, you have to pull the battery for include. thanks, Steve

Great to see this Chris. Any special handling of battery devices or all transparent? thanks, Steve

Same for a few hours.

Same for me. I am surprised to see that option as i thought it was something still being worked on.

@TriLife- Seems like parameter is #64 on the Aeotech multisensor 6 (undocumented - found on another site). And while the value is set to "2" for F when queried, I was playing around a bit, and changed to "1" for a bit, and then back to "2", and its now working in Fahrenheit. Go figure. Make sure the sensor is awake, mine is USB powered for now, so i was able to play around. Steve

Thanks - hopefully you can leverage what is already working on the ISY zwave board (500)? Happy Holidays.

Curious, @greensuit, how are you going to revert from the ZMatter board back to ZWave USB stick? Have been searching for the procedure. Thanks.