stillen_i30

Have an ICON Dimmer 2876DB that has worked flawlessly for quite some time. I turned off the power to install a phase coupler and since turning the power back on this device fails to communicate with my ISY. I've tried multiple restores and write updates to device to no avail. The device either shows up with a red ! or the 1011 icon despite multiple restore devices/write update commands. I even deleted it from ISY and factory reset and when I went to readd it still having the same issues. Event log while adding or writing updates looks ok except for this, wondering if anyone knows what this means? Mon 11/30/2015 11:13:43 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] *Failed Writing [A20034E889FF1F01] Here is the rest of the log: Mon 11/30/2015 11:13:16 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] Writing [A20034E889FF1F01] Mon 11/30/2015 11:13:16 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:13:16 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:13:18 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:13:18 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:13:18 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F8 Mon 11/30/2015 11:13:18 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F8 06 PEEK (F8) Mon 11/30/2015 11:13:19 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 2B A2 PEEK (A2) Mon 11/30/2015 11:13:19 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:13:19 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:13:19 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:13:20 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:13:20 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:13:20 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F9 Mon 11/30/2015 11:13:20 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F9 06 PEEK (F9) Mon 11/30/2015 11:13:21 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 27 34 39 (39) Mon 11/30/2015 11:13:21 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Mon 11/30/2015 11:13:30 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:13:30 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:13:39 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:13:39 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:13:43 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] *Failed Writing [A20034E889FF1F01] Mon 11/30/2015 11:13:43 PM : [1A 28 12 1 ] Memory : Write dbAddr=0x0032 [FF] cmd1=0x2E cmd2=0x00 Mon 11/30/2015 11:13:43 PM : [iNST-TX-I2 ] 02 62 1A 28 12 1F 2E 00 01 06 FF 00 00 00 00 00 00 00 00 00 00 CC Mon 11/30/2015 11:13:43 PM : [iNST-ACK ] 02 62 1A.28.12 1F 2E 00 01 06 FF 00 00 00 00 00 00 00 00 00 00 CC 06 (00) Mon 11/30/2015 11:13:45 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 2E 00 (00) Mon 11/30/2015 11:13:45 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:13:45 PM : [1A 28 12 1 ] Memory : Write dbAddr=0x0021 [1B] cmd1=0x2E cmd2=0x00 Mon 11/30/2015 11:13:45 PM : [iNST-TX-I2 ] 02 62 1A 28 12 1F 2E 00 01 05 1B 00 00 00 00 00 00 00 00 00 00 B1 Mon 11/30/2015 11:13:45 PM : [iNST-ACK ] 02 62 1A.28.12 1F 2E 00 01 05 1B 00 00 00 00 00 00 00 00 00 00 B1 06 (00) Mon 11/30/2015 11:13:47 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 2E 00 (00) Mon 11/30/2015 11:13:47 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:13:47 PM : [D2D EVENT ] Event [1A 28 12 1] [ERR] [0] uom=0 prec=-1 Mon 11/30/2015 11:13:47 PM : [ 1A 28 12 1] ERR 0 Mon 11/30/2015 11:13:47 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 4B (4B) Mon 11/30/2015 11:13:47 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:13:47 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [75] uom=0 prec=-1 Mon 11/30/2015 11:13:47 PM : [ 14 86 D3 1] CLIHUM 75 Mon 11/30/2015 11:14:07 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 47 (47) Mon 11/30/2015 11:14:07 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:14:07 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [71] uom=0 prec=-1 Mon 11/30/2015 11:14:07 PM : [ 14 86 12 1] CLIHUM 71 Mon 11/30/2015 11:14:08 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:14:08 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:14:08 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:14:08 PM : [ 14 83 3 1] CLIHUM 74 Mon 11/30/2015 11:14:43 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:14:43 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:14:51 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:14:51 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:00 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:00 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:02 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:15:02 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:02 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F8 Mon 11/30/2015 11:15:02 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F8 06 PEEK (F8) Mon 11/30/2015 11:15:02 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2F 2B A2 PEEK (A2) Mon 11/30/2015 11:15:02 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:15:02 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:02 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:02 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 23 2B A2 PEEK (A2) Mon 11/30/2015 11:15:02 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Mon 11/30/2015 11:15:11 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:11 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:11 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:15:11 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:11 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F9 Mon 11/30/2015 11:15:12 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F9 06 PEEK (F9) Mon 11/30/2015 11:15:16 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 4C (4C) Mon 11/30/2015 11:15:16 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:15:16 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [76] uom=0 prec=-1 Mon 11/30/2015 11:15:16 PM : [ 14 86 D3 1] CLIHUM 76 Mon 11/30/2015 11:15:20 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:20 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:24 PM : [iNST-TX-I1 ] 02 62 1B 94 7E 0F 14 00 Mon 11/30/2015 11:15:24 PM : [iNST-ACK ] 02 62 1B.94.7E 0F 14 00 06 LTOFF-F(00) Mon 11/30/2015 11:15:24 PM : [std MH ] Unexpected Ack imCmd=62 cmd1=LTOFF-F 0x14 Mon 11/30/2015 11:15:24 PM : [All ] Writing 16 bytes to devices Mon 11/30/2015 11:15:24 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] Writing [A20034E889FF1F01] Mon 11/30/2015 11:15:24 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:24 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:28 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:15:28 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:28 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F8 Mon 11/30/2015 11:15:28 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F8 06 PEEK (F8) Mon 11/30/2015 11:15:28 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 2B A2 PEEK (A2) Mon 11/30/2015 11:15:28 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:28 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:28 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:30 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:15:30 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:30 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F9 Mon 11/30/2015 11:15:30 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F9 06 PEEK (F9) Mon 11/30/2015 11:15:32 PM : [iNST-SRX ] 02 50 14.84.CF 34.E8.89 0B 6E 3F (3F) Mon 11/30/2015 11:15:32 PM : [std-Direct ] 14.84.CF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:32 PM : [D2D EVENT ] Event [14 84 CF 1] [sT] [126] uom=0 prec=-1 Mon 11/30/2015 11:15:32 PM : [ 14 84 CF 1] ST 126 Mon 11/30/2015 11:15:37 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 4B (4B) Mon 11/30/2015 11:15:37 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:37 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [75] uom=0 prec=-1 Mon 11/30/2015 11:15:37 PM : [ 14 83 3 1] CLIHUM 75 Mon 11/30/2015 11:15:41 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:41 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:42 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 28 0F SET-MSB(0F) Mon 11/30/2015 11:15:42 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:15:42 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 2B F9 Mon 11/30/2015 11:15:42 PM : [iNST-ACK ] 02 62 1A.28.12 0F 2B F9 06 PEEK (F9) Mon 11/30/2015 11:15:51 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:15:51 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:15:55 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] *Failed Writing [A20034E889FF1F01] Mon 11/30/2015 11:16:41 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6E 4A (4A) Mon 11/30/2015 11:16:41 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:16:41 PM : [D2D EVENT ] Event [14 86 D3 1] [sT] [148] uom=0 prec=-1 Mon 11/30/2015 11:16:41 PM : [ 14 86 D3 1] ST 148 Mon 11/30/2015 11:16:48 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:16:48 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:16:48 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:16:48 PM : [ 14 83 3 1] CLIHUM 73 Mon 11/30/2015 11:17:04 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 47 (47) Mon 11/30/2015 11:17:04 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:17:56 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 4D (4D) Mon 11/30/2015 11:17:56 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:17:56 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [77] uom=0 prec=-1 Mon 11/30/2015 11:17:56 PM : [ 14 86 D3 1] CLIHUM 77 Mon 11/30/2015 11:18:04 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 48 (48) Mon 11/30/2015 11:18:04 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:18:04 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:18:04 PM : [ 14 83 3 1] CLIHUM 72 Mon 11/30/2015 11:18:06 PM : [iNST-SRX ] 02 50 14.84.CF 34.E8.89 0B 6E 3E (3E) Mon 11/30/2015 11:18:06 PM : [std-Direct ] 14.84.CF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:18:06 PM : [D2D EVENT ] Event [14 84 CF 1] [sT] [124] uom=0 prec=-1 Mon 11/30/2015 11:18:06 PM : [ 14 84 CF 1] ST 124 Mon 11/30/2015 11:18:15 PM : [iNST-SRX ] 02 50 14.83.03 00.00.02 CB 11 00 LTONRR (00) Mon 11/30/2015 11:18:15 PM : [std-Group ] 14.83.03-->Group=2, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:18:15 PM : [D2D EVENT ] Event [14 83 3 3] [DON] [0] uom=0 prec=-1 Mon 11/30/2015 11:18:15 PM : [ 14 83 3 3] DON 0 Mon 11/30/2015 11:18:15 PM : [D2D EVENT ] Event [14 83 3 3] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:18:15 PM : [ 14 83 3 3] ST 255 Mon 11/30/2015 11:18:15 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHCS] [1] uom=0 prec=-1 Mon 11/30/2015 11:18:15 PM : [ 14 83 3 1] CLIHCS 1 Mon 11/30/2015 11:18:15 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 41 11 02 LTONRR (02) Mon 11/30/2015 11:18:15 PM : [std-Cleanup ] 14.83.03-->ISY/PLM Group=2, Max Hops=1, Hops Left=0 Mon 11/30/2015 11:18:15 PM : [iNST-DUP ] Previous message ignored. Mon 11/30/2015 11:18:15 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 46 11 02 LTONRR (02) Mon 11/30/2015 11:18:15 PM : [std-Cleanup ] 14.83.03-->ISY/PLM Group=2, Max Hops=2, Hops Left=1 Mon 11/30/2015 11:18:15 PM : [iNST-DUP ] Previous message ignored. Mon 11/30/2015 11:19:07 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6E 4B (4B) Mon 11/30/2015 11:19:07 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:19:07 PM : [D2D EVENT ] Event [14 86 D3 1] [sT] [150] uom=0 prec=-1 Mon 11/30/2015 11:19:07 PM : [ 14 86 D3 1] ST 150 Mon 11/30/2015 11:19:13 PM : [iNST-SRX ] 02 50 14.84.CF 34.E8.89 0B 6E 3F (3F) Mon 11/30/2015 11:19:13 PM : [std-Direct ] 14.84.CF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:19:13 PM : [D2D EVENT ] Event [14 84 CF 1] [sT] [126] uom=0 prec=-1 Mon 11/30/2015 11:19:13 PM : [ 14 84 CF 1] ST 126 Mon 11/30/2015 11:19:13 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:19:13 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:19:13 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:19:13 PM : [ 14 83 3 1] CLIHUM 73 Mon 11/30/2015 11:19:21 PM : [iNST-TX-I1 ] 02 62 1B 94 7E 0F 14 00 Mon 11/30/2015 11:19:21 PM : [iNST-ACK ] 02 62 1B.94.7E 0F 14 00 06 LTOFF-F(00) Mon 11/30/2015 11:19:22 PM : [iNST-SRX ] 02 50 1B.94.7E 34.E8.89 27 14 00 LTOFF-F(00) Mon 11/30/2015 11:19:22 PM : [std-Direct Ack] 1B.94.7E-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Mon 11/30/2015 11:19:22 PM : [D2D EVENT ] Event [1B 94 7E 1] [sT] [0] uom=0 prec=-1 Mon 11/30/2015 11:19:22 PM : [ 1B 94 7E 1] ST 0 Mon 11/30/2015 11:19:22 PM : [D2D-CMP 0042] STS [1B 94 7E 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Mon 11/30/2015 11:19:22 PM : [D2D-CMP 0009] STS [1B 94 7E 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Mon 11/30/2015 11:19:22 PM : [ Time] 23:19:25 0(0) Mon 11/30/2015 11:19:22 PM : [ Time] 23:19:25 0(0) Mon 11/30/2015 11:19:22 PM : [iNST-TX-I1 ] 02 62 1B 94 7E 0F 12 00 Mon 11/30/2015 11:19:22 PM : [iNST-ACK ] 02 62 1B.94.7E 0F 12 00 06 LTON-F (00) Mon 11/30/2015 11:19:24 PM : [iNST-SRX ] 02 50 1B.94.7E 34.E8.89 23 12 00 LTON-F (00) Mon 11/30/2015 11:19:24 PM : [std-Direct Ack] 1B.94.7E-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Mon 11/30/2015 11:19:24 PM : [D2D EVENT ] Event [1B 94 7E 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:19:24 PM : [ 1B 94 7E 1] ST 255 Mon 11/30/2015 11:19:24 PM : [D2D-CMP 0042] STS [1B 94 7E 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> false Mon 11/30/2015 11:19:24 PM : [D2D-CMP 0009] STS [1B 94 7E 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Mon 11/30/2015 11:19:38 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:19:38 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:19:38 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:19:38 PM : [ 14 86 12 1] CLIHUM 73 Mon 11/30/2015 11:20:24 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 48 (48) Mon 11/30/2015 11:20:24 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:20:24 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:20:24 PM : [ 14 86 D3 1] CLIHUM 72 Mon 11/30/2015 11:21:04 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 48 (48) Mon 11/30/2015 11:21:04 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:21:04 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:21:04 PM : [ 14 86 12 1] CLIHUM 72 Mon 11/30/2015 11:21:36 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:21:36 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:21:36 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:21:36 PM : [ 14 83 3 1] CLIHUM 74 Mon 11/30/2015 11:21:42 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 49 (49) Mon 11/30/2015 11:21:42 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:21:42 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:21:42 PM : [ 14 86 D3 1] CLIHUM 73 Mon 11/30/2015 11:22:44 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 58 (58) Mon 11/30/2015 11:22:44 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:22:44 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [88] uom=0 prec=-1 Mon 11/30/2015 11:22:44 PM : [ 14 83 3 1] CLIHUM 88 Mon 11/30/2015 11:22:52 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 4A (4A) Mon 11/30/2015 11:22:52 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:22:52 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:22:52 PM : [ 14 86 D3 1] CLIHUM 74 Mon 11/30/2015 11:23:46 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 47 (47) Mon 11/30/2015 11:23:46 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:23:46 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [71] uom=0 prec=-1 Mon 11/30/2015 11:23:46 PM : [ 14 86 12 1] CLIHUM 71 Mon 11/30/2015 11:23:47 PM : [iNST-SRX ] 02 50 14.86.D3 00.00.02 CF 13 00 LTOFFRR(00) Mon 11/30/2015 11:23:47 PM : [std-Group ] 14.86.D3-->Group=2, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:23:47 PM : [D2D EVENT ] Event [14 86 D3 3] [DOF] [0] uom=0 prec=-1 Mon 11/30/2015 11:23:47 PM : [ 14 86 D3 3] DOF 0 Mon 11/30/2015 11:23:47 PM : [D2D EVENT ] Event [14 86 D3 3] [sT] [0] uom=0 prec=-1 Mon 11/30/2015 11:23:47 PM : [ 14 86 D3 3] ST 0 Mon 11/30/2015 11:23:47 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHCS] [0] uom=0 prec=-1 Mon 11/30/2015 11:23:47 PM : [ 14 86 D3 1] CLIHCS 0 Mon 11/30/2015 11:23:47 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 45 13 02 LTOFFRR(02) Mon 11/30/2015 11:23:47 PM : [std-Cleanup ] 14.86.D3-->ISY/PLM Group=2, Max Hops=1, Hops Left=1 Mon 11/30/2015 11:23:47 PM : [iNST-DUP ] Previous message ignored. Mon 11/30/2015 11:23:53 PM : [iNST-SRX ] 02 50 14.84.CF 34.E8.89 0B 6E 3E (3E) Mon 11/30/2015 11:23:53 PM : [std-Direct ] 14.84.CF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:23:53 PM : [D2D EVENT ] Event [14 84 CF 1] [sT] [124] uom=0 prec=-1 Mon 11/30/2015 11:23:53 PM : [ 14 84 CF 1] ST 124 Mon 11/30/2015 11:23:54 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:23:54 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:23:54 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:23:54 PM : [ 14 83 3 1] CLIHUM 74 Mon 11/30/2015 11:24:04 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6E 4C (4C) Mon 11/30/2015 11:24:04 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:24:04 PM : [D2D EVENT ] Event [14 86 D3 1] [sT] [152] uom=0 prec=-1 Mon 11/30/2015 11:24:04 PM : [ 14 86 D3 1] ST 152 Mon 11/30/2015 11:24:58 PM : [ IR] 0153 Press Mon 11/30/2015 11:25:02 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:25:02 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:25:02 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:25:02 PM : [ 14 83 3 1] CLIHUM 73 Mon 11/30/2015 11:25:02 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:25:02 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:25:12 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 59 (59) Mon 11/30/2015 11:25:12 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:25:12 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [89] uom=0 prec=-1 Mon 11/30/2015 11:25:12 PM : [ 14 86 D3 1] CLIHUM 89 Mon 11/30/2015 11:26:01 PM : [iNST-SRX ] 02 50 1B.5A.89 00.00.02 C7 11 00 LTONRR (00) Mon 11/30/2015 11:26:01 PM : [std-Group ] 1B.5A.89-->Group=2, Max Hops=3, Hops Left=1 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [1B 5A 89 2] [DON] [0] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 1B 5A 89 2] DON 0 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [1B 5A 89 2] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 1B 5A 89 2] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [1B 3F 2F 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 1B 3F 2F 1] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [1B 45 53 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 1B 45 53 1] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [30 EA 18 4] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 30 EA 18 4] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [34 E2 7D 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 34 E2 7D 1] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [34 E3 58 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 34 E3 58 1] ST 255 Mon 11/30/2015 11:26:01 PM : [D2D EVENT ] Event [3B 8B AF 3] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:26:01 PM : [ 3B 8B AF 3] ST 255 Mon 11/30/2015 11:26:02 PM : [iNST-SRX ] 02 50 1B.5A.89 34.E8.89 41 11 02 LTONRR (02) Mon 11/30/2015 11:26:02 PM : [std-Cleanup ] 1B.5A.89-->ISY/PLM Group=2, Max Hops=1, Hops Left=0 Mon 11/30/2015 11:26:02 PM : [iNST-DUP ] Previous message ignored. Mon 11/30/2015 11:26:10 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:26:10 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:26:10 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:26:10 PM : [ 14 83 3 1] CLIHUM 74 Mon 11/30/2015 11:26:19 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:26:19 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:26:19 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:26:19 PM : [ 14 86 12 1] CLIHUM 74 Mon 11/30/2015 11:26:36 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 49 (49) Mon 11/30/2015 11:26:36 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:26:36 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:26:36 PM : [ 14 86 D3 1] CLIHUM 73 Mon 11/30/2015 11:27:18 PM : [iNST-TX-I1 ] 02 62 1B 94 7E 0F 14 00 Mon 11/30/2015 11:27:18 PM : [iNST-ACK ] 02 62 1B.94.7E 0F 14 00 06 LTOFF-F(00) Mon 11/30/2015 11:27:20 PM : [iNST-SRX ] 02 50 1B.94.7E 34.E8.89 27 14 00 LTOFF-F(00) Mon 11/30/2015 11:27:20 PM : [std-Direct Ack] 1B.94.7E-->ISY/PLM Group=0, Max Hops=3, Hops Left=1 Mon 11/30/2015 11:27:20 PM : [D2D EVENT ] Event [1B 94 7E 1] [sT] [0] uom=0 prec=-1 Mon 11/30/2015 11:27:20 PM : [ 1B 94 7E 1] ST 0 Mon 11/30/2015 11:27:20 PM : [D2D-CMP 0042] STS [1B 94 7E 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true Mon 11/30/2015 11:27:20 PM : [D2D-CMP 0009] STS [1B 94 7E 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> false Mon 11/30/2015 11:27:20 PM : [ Time] 23:27:28 0(0) Mon 11/30/2015 11:27:20 PM : [ Time] 23:27:28 0(0) Mon 11/30/2015 11:27:20 PM : [iNST-TX-I1 ] 02 62 1B 94 7E 0F 12 00 Mon 11/30/2015 11:27:20 PM : [iNST-ACK ] 02 62 1B.94.7E 0F 12 00 06 LTON-F (00) Mon 11/30/2015 11:27:21 PM : [iNST-SRX ] 02 50 1B.94.7E 34.E8.89 23 12 00 LTON-F (00) Mon 11/30/2015 11:27:21 PM : [std-Direct Ack] 1B.94.7E-->ISY/PLM Group=0, Max Hops=3, Hops Left=0 Mon 11/30/2015 11:27:21 PM : [D2D EVENT ] Event [1B 94 7E 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:27:21 PM : [ 1B 94 7E 1] ST 255 Mon 11/30/2015 11:27:21 PM : [D2D-CMP 0042] STS [1B 94 7E 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> false Mon 11/30/2015 11:27:21 PM : [D2D-CMP 0009] STS [1B 94 7E 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=255 uom=0 prec=-1) --> true Mon 11/30/2015 11:27:35 PM : [1A 28 12 1 ] Link 1 : 0FF0 [620134E889010001] Saving [62..............] Mon 11/30/2015 11:27:35 PM : [1A 28 12 1 ] Link 0 : 0FF8 [220034E889FF1F01] Saving [22..............] Mon 11/30/2015 11:27:35 PM : [MNG-LNK-RSP ] 02 6F 80 E2 00 1A 28 12 01 1E 39 06 Mon 11/30/2015 11:27:35 PM : [1A 28 12 1 ] Start : Removing device from ISY Mon 11/30/2015 11:27:35 PM : [1A 28 12 1 ] Finish : Removing from ISY was Successful Mon 11/30/2015 11:27:35 PM : [All ] Writing 0 bytes to devices Mon 11/30/2015 11:27:48 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:27:48 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:27:48 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:27:48 PM : [ 14 86 D3 1] CLIHUM 74 Mon 11/30/2015 11:27:48 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 48 (48) Mon 11/30/2015 11:27:48 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:27:48 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:27:48 PM : [ 14 86 12 1] CLIHUM 72 Mon 11/30/2015 11:27:54 PM : Start Insteon Device Linking Mode Mon 11/30/2015 11:27:54 PM : [LNK-BGN ] 02 64 01 00 06 Mon 11/30/2015 11:28:02 PM : [LNK-STAT ] 02 53 M(01) gid=00 1A.28.12 011E 39 Mon 11/30/2015 11:28:02 PM : [1A.28.12 00] Linked device type=01.1E fw=39 Mon 11/30/2015 11:28:02 PM : [1A 28 12 0 ] Added to list of devices to link to ISY Mon 11/30/2015 11:28:02 PM : [LNK-BGN ] 02 64 01 00 06 Mon 11/30/2015 11:28:06 PM : Stop Insteon Device Linking Mode, Final processing to follow Mon 11/30/2015 11:28:07 PM : [LNK-END ] 02 65 06 : : Unexpected, ignored (65) Mon 11/30/2015 11:28:07 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 0D 00 Mon 11/30/2015 11:28:07 PM : [iNST-ACK ] 02 62 1A.28.12 0F 0D 00 06 (00) Mon 11/30/2015 11:28:16 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 0D 00 Mon 11/30/2015 11:28:16 PM : [iNST-ACK ] 02 62 1A.28.12 0F 0D 00 06 (00) Mon 11/30/2015 11:28:18 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 0D 01 (01) Mon 11/30/2015 11:28:18 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:28:18 PM : [1A 28 12 0 ] Calibrating engine version Mon 11/30/2015 11:28:18 PM : [1A 28 12 0 ] May not fully support i2, reverting to i1 Mon 11/30/2015 11:28:18 PM : [1A 28 12 0 ] Using Database Link Table offset 0x0FF8 (reported 0x0000) Mon 11/30/2015 11:28:18 PM : [1A 28 12 1 ] Start : Adding device to ISY Mon 11/30/2015 11:28:18 PM : [1A 28 12 1 ] Finish : Adding device to ISY was Successful Mon 11/30/2015 11:28:18 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] Saving [A20034E889FF1F01] Mon 11/30/2015 11:28:18 PM : [1A 28 12 1 ] Link 1 : 0FF0 [E20134E889010001] Saving [E20134E889010001] Mon 11/30/2015 11:28:18 PM : [iNST-TX-I2 ] 02 62 1A 28 12 1F 2E 00 01 00 00 00 00 00 00 00 00 00 00 00 00 D1 Mon 11/30/2015 11:28:18 PM : [iNST-ACK ] 02 62 1A.28.12 1F 2E 00 01 00 00 00 00 00 00 00 00 00 00 00 00 D1 06 (00) Mon 11/30/2015 11:28:19 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2B 2E 00 (00) Mon 11/30/2015 11:28:19 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:28:20 PM : [iNST-ERX ] 02 51 1A 28 12 34 E8 89 12 2E 00 01 01 00 00 20 AA 1C FE 00 00 00 28 25 D1 Mon 11/30/2015 11:28:20 PM : [Ext-Direct ] 1A.28.12-->ISY/PLM Group=0, Max Hops=2, Hops Left=0 Mon 11/30/2015 11:28:20 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 19 00 Mon 11/30/2015 11:28:20 PM : [iNST-ACK ] 02 62 1A.28.12 0F 19 00 06 LTSREQ (LIGHT) Mon 11/30/2015 11:28:21 PM : [iNST-SRX ] 02 50 1A.28.12 34.E8.89 2F 01 FF (FF) Mon 11/30/2015 11:28:21 PM : [std-Direct Ack] 1A.28.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:28:21 PM : [1A 28 12 0 ] Successfully added device Mon 11/30/2015 11:28:21 PM : [D2D EVENT ] Event [1A 28 12 1] [OL] [255] uom=0 prec=-1 Mon 11/30/2015 11:28:21 PM : [ 1A 28 12 1] OL 255 Mon 11/30/2015 11:28:21 PM : [D2D EVENT ] Event [1A 28 12 1] [RR] [28] uom=0 prec=-1 Mon 11/30/2015 11:28:21 PM : [ 1A 28 12 1] RR 28 Mon 11/30/2015 11:28:21 PM : [D2D EVENT ] Event [1A 28 12 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:28:21 PM : [ 1A 28 12 1] ST 255 Mon 11/30/2015 11:28:21 PM : [D2D EVENT ] Event [1A 28 12 1] [OL] [255] uom=0 prec=-1 Mon 11/30/2015 11:28:21 PM : [ 1A 28 12 1] OL 255 Mon 11/30/2015 11:28:21 PM : [D2D EVENT ] Event [1A 28 12 1] [RR] [28] uom=0 prec=-1 Mon 11/30/2015 11:28:21 PM : [ 1A 28 12 1] RR 28 Mon 11/30/2015 11:28:21 PM : [All ] Writing 16 bytes to devices Mon 11/30/2015 11:28:22 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] Writing [A20034E889FF1F01] Mon 11/30/2015 11:28:22 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:28:22 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:28:30 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:28:30 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:28:39 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:28:39 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:28:43 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] *Failed Writing [A20034E889FF1F01] Mon 11/30/2015 11:28:43 PM : [All ] Writing 16 bytes to devices Mon 11/30/2015 11:28:44 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] Writing [A20034E889FF1F01] Mon 11/30/2015 11:28:44 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:28:44 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:28:49 PM : [iNST-SRX ] 02 50 14.83.03 34.E8.89 0B 6F 48 (48) Mon 11/30/2015 11:28:49 PM : [std-Direct ] 14.83.03-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:28:49 PM : [D2D EVENT ] Event [14 83 3 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:28:49 PM : [ 14 83 3 1] CLIHUM 72 Mon 11/30/2015 11:28:53 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:28:53 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:29:02 PM : [iNST-TX-I1 ] 02 62 1A 28 12 0F 28 0F Mon 11/30/2015 11:29:02 PM : [iNST-ACK ] 02 62 1A.28.12 0F 28 0F 06 SET-MSB(0F) Mon 11/30/2015 11:29:06 PM : [1A 28 12 1 ] Link 0 : 0FF8 [A20034E889FF1F01] *Failed Writing [A20034E889FF1F01] Mon 11/30/2015 11:29:15 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 48 (48) Mon 11/30/2015 11:29:15 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:29:15 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [72] uom=0 prec=-1 Mon 11/30/2015 11:29:15 PM : [ 14 86 D3 1] CLIHUM 72 Mon 11/30/2015 11:29:23 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 49 (49) Mon 11/30/2015 11:29:23 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:29:23 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [73] uom=0 prec=-1 Mon 11/30/2015 11:29:23 PM : [ 14 86 12 1] CLIHUM 73 Mon 11/30/2015 11:30:15 PM : [iNST-SRX ] 02 50 2A.05.5C 00.00.01 CF 11 00 LTONRR (00) Mon 11/30/2015 11:30:15 PM : [std-Group ] 2A.05.5C-->Group=1, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [2A 5 5C 1] [DON] [0] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 2A 5 5C 1] DON 0 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [F 16 5C 8] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ F 16 5C 8] ST 255 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [2A 5 5C 1] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 2A 5 5C 1] ST 255 Mon 11/30/2015 11:30:15 PM : [D2D-CMP 0074] STS [2A 5 5C 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=112 uom=0 prec=-1) --> false Mon 11/30/2015 11:30:15 PM : [D2D-CMP 0074] STS [2A 5 5C 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=114 uom=0 prec=-1) --> false Mon 11/30/2015 11:30:15 PM : [D2D-CMP 0074] STS [2A 5 5C 1] ST op=1 Event(val=255 uom=0 prec=-1) is Condition(val=117 uom=0 prec=-1) --> false Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [39 43 59 4] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 39 43 59 4] ST 255 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [2A 7 2A 2] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 2A 7 2A 2] ST 255 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [39 43 EE 4] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 39 43 EE 4] ST 255 Mon 11/30/2015 11:30:15 PM : [D2D EVENT ] Event [30 EA 18 5] [sT] [255] uom=0 prec=-1 Mon 11/30/2015 11:30:15 PM : [ 30 EA 18 5] ST 255 Mon 11/30/2015 11:30:15 PM : [iNST-SRX ] 02 50 2A.05.5C 11.02.01 CF 06 00 (00) Mon 11/30/2015 11:30:15 PM : [std-Group ] 2A.05.5C-->11.02.01, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:30:15 PM : [iNST-INFO ] Previous message ignored. Mon 11/30/2015 11:30:23 PM : [iNST-SRX ] 02 50 14.86.D3 34.E8.89 0F 6F 4B (4B) Mon 11/30/2015 11:30:23 PM : [std-Direct ] 14.86.D3-->ISY/PLM Group=0, Max Hops=3, Hops Left=3 Mon 11/30/2015 11:30:23 PM : [D2D EVENT ] Event [14 86 D3 1] [CLIHUM] [75] uom=0 prec=-1 Mon 11/30/2015 11:30:23 PM : [ 14 86 D3 1] CLIHUM 75 Mon 11/30/2015 11:30:50 PM : [iNST-SRX ] 02 50 14.86.12 34.E8.89 0B 6F 4A (4A) Mon 11/30/2015 11:30:50 PM : [std-Direct ] 14.86.12-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Mon 11/30/2015 11:30:50 PM : [D2D EVENT ] Event [14 86 12 1] [CLIHUM] [74] uom=0 prec=-1 Mon 11/30/2015 11:30:50 PM : [ 14 86 12 1] CLIHUM 74

I got to installing a second coupler. Earlier today I ran several scene tests and a lot of them in the garage and backyard failed. Then later this night, I ran the same ones again several times and they repeatedly succeed. For those of you who have dealt with this before, what are some common things to consider in troubleshooting why this time-dependent communication issue is occurring?

stusviews, I do have a wired phase coupler already. However, I am starting to suspect how this was installed. Let me explain: My home has a main panel and two subpanels. They're actually daisy-chained to one-another. The main panel has a bypass from the mains that feed one of the subpanels. My one and only phase coupler is installed at the bottom of this subpanel. The second subpanel comes off the first subpanel and goes into the backyard and acts as a breaker for all the pool equipment we have back there. I called insteon and spoke with someone who wasn't sure if this was going to be bridging my main and pool subpanel's breakers or not. I am now thinking of getting another TWO phase couplers during the thanksgiving sale and wiring one in the main panel and one in the second subpanel.

Teken, I have had a few switches like that which were just internally "wrong." They were all KPLs that came in the individual blister packs with 2486DWH6 model numbers. ALL of them were causing issues on my network. The last of the 6 was removed a few weeks ago. They have all been replaced with dualband devices. I only have a few non-dual band devices. I relocated my PLM to a nearby plug (but used an extension cord). I will wait and run "business as usual" as mainly my programs are not executing devices in the manner which they should. It will take a few days to monitor and see if this is the issue. I am going to try to place to AP's together in the garage on opposite phases (near the breaker) but I have to rewire one of my plugs to do so. Any other ideas are welcomed

Nothing is flashing. These are programs that I wrote a long time ago and had worked fine until recently (no changes or updates were made to those programs either). Even with the transformers from low voltage lights I used to have good communications. Nearly every one of my scenes show devices that fail but the scenes usually otherwise used to work (i never extensively checked scene tests in the past when everything was working fine though). But now that programs aren't working properly, I'm starting to get worried. I wondered if my circuit breaker phase coupler has blown out? Has anyone else had this problem (I worry about this because I've had several dead PLMs, KPLs and access points already).

Ran a few "scene tests" on various scenes around the house (master bedroom lamps and lights, backyard landscape lights including several insteon devices back there, garage overhead lights, basement home theater lights). Most of the time the scene test is run, most devices are reported back as failing. However, the devices do turn on and off with the scene test running. Not sure why this is going on either. I had a failing old controlinc that I unplugged but still getting same results.

Thanks for the help. I am still having issues -Not only devices related to the garage are having trouble. Now, more than ever, my landscape lights in the backyard are not turning on. Occasionally the front yard landscape lights don't turn on either. The front landscape lights are on a different circuit than the others related to the garage. -Our christmas tree in the house is in the living room (far from the garage) and lately the program calling to turn it on or off is also becoming flaky. -I recently cleared the java cache on the computer and unplugged the PLM and ISY, then replugged everything after a few mins (PLM first then waited a min and then ISY). -I have no CFLs in the house anymore -If I manually engage a set of devices that a program was supposed to do (and didn't) using the "then" command the devices will nearly instantaneously turn on (from MobiLinc or admin console on a PC). Some of my programs have a SECOND command built in to ensure that the lights turn on (after a few second wait period) or turn off...and it is still not working Not sure what is going on here, but my reliability status has significantly degraded!

ADMIN PLEASE DELETE THIS THREAD

I'm on my 3rd PLM... Replaced about 4 months ago. This new PLM hasn't "felt" that great... New v2.1. Any idea why my scene failed? This is one of a handful of devices that are not responding with nearly as much reliability as it used to, which is why I performed the scene test on this particular device.

I have a pretty extensive insteon network that for the most part over the past several years has worked fine until recently about a few mos ago when I purchased some more devices (the usual, KPLs, lamplincs, etc). Also, no new electronic devices plugged in. All my major electronic "noisemakers" are behind filterlincs. Only recently have a I noticed what I suspect to be poor communication issues. I have 5 or 6 range extenders, a wired-in bridge at the panel, and the filters I mentioned above in an effort to maintain solid communications. However, only recently have I had issues where programs that call for certain things to happen don't run. Some examples are a program I have to turn off all my outdoor lights during the day. I've noticed that about 4 out of 7 days per week random outside lights are on despite the program reconciling those lights, twice to be sure, to be off during daylight hours. Also, when my garage door opens certain front lights turn on but lately they are barely turning on. I have a scene test I ran of one of my outside lights which failed. Does this provide any clues as to what could be going on? Tue 10/13/2015 09:34:03 PM : [GRP-RX ] 02 61 40 13 00 06 Tue 10/13/2015 09:34:07 PM : [CLEAN-UP-RPT] 02 58 06 Tue 10/13/2015 09:34:07 PM : [iNST-SRX ] 02 50 1B.4F.B1 34.E8.89 66 13 FF LTOFFRR(FF) Tue 10/13/2015 09:34:07 PM : [std-Cleanup Ack] 1B.4F.B1-->ISY/PLM Group=0, Max Hops=2, Hops Left=1 <html><font color="red">----- Side Garage Lights Test Results -----</font></html> <html><font color="red">[succeeded]</font> Side Garage Motion Flood (1B 4F B1 1)</html> <html><font color="red">[Failed]</font> Side Garage Lights KP (2B 98 CF 1)</html> <html><font color="red">----- Side Garage Lights Test Results -----</font></html> Tue 10/13/2015 09:34:12 PM : [iNST-ACK ] 02 62 00.00.40 CF 13 00 06 LTOFFRR(00) Tue 10/13/2015 09:34:19 PM : [iNST-SRX ] 02 50 14.84.CF 34.E8.89 0B 6E 55 (55) Tue 10/13/2015 09:34:19 PM : [std-Direct ] 14.84.CF-->ISY/PLM Group=0, Max Hops=3, Hops Left=2 Tue 10/13/2015 09:34:19 PM : [D2D EVENT ] Event [14 84 CF 1] [sT] [170] uom=0 prec=-1 Thanks for your ideas

Ok thanks, since upgrading to Win10 I didn't even now IE was still on here since I could only find edge and chrome. Found IE now, thanks for the help

Thanks for the suggestions. I figured using variables may not be the solution in this case since the door would lock (or unlock) first anyway once four clicks were reached and then revert back to the opposite state once the fifth click was reached. But just to clarify, I want to do this only for my wife and I, not the bug guy to get into the house. The buy guy gets into the garage only and sprays there but would never think of clicking any of my switches in there more than twice. I do have a KPL in there that I am planning to set as only door LOCK but for unlock purposes, was thinking of solutions.

1.) Not the best with using variables yet. I've only begun using them recently. The switch closest to the door lock is a SwitchLinc (its actually an old ICON switch). My exterminator (who is trustworthy) comes into the garage and I don't want him inadvertently opening the door...therefore I figured if someone were to click the "ON" four times for example then the door unlock command would be sent to the morninglinc and unlock the door. If someone were to click the "OFF" paddle four times then the door would lock. I guess a state variable would work best since that would trigger the program to run the lock/unlock command? 2.) The tabletop controlled has discreet ON and OFF buttons for five devices. It is now replaced by the tabletop enclosure and KPL that fits in there. http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=305857 This would allow me to program the 1-OFF button to send a lock command to all the locksets.

I have a morninglinc and lock for quite a while on our guest house door which is barely used. I have now installed two more locksets within the house today. I wanted to achieve a few things and need help knowing how to program this 1.) Scenario one involves a lock at the door coming in from the garage. -I want to create a program using integer variables to click the light switch in the garage 4 times for unlock and 5 times for lock. Is this possible and if so, how can it be done? 2.) I have another lock at the backyard entry. I want that lock and the above lock to have LOCK commands sent to them every night when I use my tabletop controlled (now discontinued) by pressing "1-OFF" Thanks for the help

I'm having trouble using the admin console on Windows 10 Chrome reports they do not allow java use anymore The new browser on Windows 10 (Windows Edge) does not allow access period. How do I gain access to the control panel on this machine?

I use many LED strips on insteon without issues if you do use a dimmer switch just set the dim interval to the lowest level

I also noticed that I get a "request failed" error when I simply try to create a new folder in my ISY (ie, "Kitchen" folder). Thusfar, I've tried clearing the java cache again, installed 4.2.28, backup and reboot ISY, etc etc, still keep getting "request failed" errors for simple requests. Other things seem to be functioning normally

I have 53 scenes, nothing major. My ISY is 994i non-pro. Tried to power cycle and still have the same result. All of a sudden too! Any other things I could try?

On two separate computers, I'm unable to create a new scene. I click on the new scene button and name the scene, then when I hit "enter" I get this error message: "upnp cancellation failed: SID not found [uuid:169]" I've updated to latest java on one of the machines, cleared java cache and tried again, same result. If I try creating a scene a second time, again I can name it but as soon as I hit enter I then get: "Request failed" Any help is appreciated, thanks. (version 4.2.23)

I have a regular insteon paddle dimmer that I was using as a three-way switch for a set of hallway lights. I have since removed it from its original location, factory reset it, and then installed it in a different location to control a completely different set of lights. However, whenever I manually press "on" or "off," it not only controls the new set of lights I want it to control, but it also is controlling the old set of lights too. I tried removing the device a few times from ISY and reprogramming it via ISY. I have ensured there are no extraneous programs that could be allowing the undesired lights to still be controlled. I tried factory reset and "restore device" a few times and it still happens. Any ideas on how to remedy this situation?

I bought one of those label makers from walmart for like 10 bucks. They sell a clear roll (plastic) and the smallest font using two lines worked perfectly for so many of my KPLs. The clear tape blends in well enough that the buttons look custom. The tape does not come off easily at all either. And as someone mentioned above, just rub it for a few moments with a Qtip and nail polish remover to get the original markings off.

Good to know, thanks Lee. I wonder why the isy programmers allow the 8 button to show up when using the "replace with" function on a 6 button device...that should probably be removed from the programming. Last night, I did the "restore device" command and now all the functions are working on the 8 button

I've had a few KPLs that required replacement. The new models they are being replaced with required me to upgrade to 994i which has worked fine so far. The issue I have is twice now, I've had to replace a 6 button older KPL. Since now the new dual band KPLs are the same price for 6 and 8 buttons, I've purchased 8 button replacements. However, when I use "Replace with" function in ISY to replace the old 6 button with the new 8 button, it converts the new 8 button into a 6 button and none of the scenes transfer over to the new KPL buttons. The button attributes DO transfer over (toggle mode, etc) but nothing else does. This has happened for both KPLs in different locations. What am I doing wrong? For one of these, I ended up removing and re-adding the entire thing manually (the old laborious way) which worked, but renders the "replace with" function useless.

I have a Bose whole house audio system with a panel of amps for individual rooms in the laundry room. Each room has a personal music center remote. Out back, there are two in-ceiling speakers and two Bose Element speakers on the patio that actually sound good (previous owner had all this installed so it works for me). All I need out back are the remote for the speakers and my phone which I have out there anyway. I also use an old android that is no longer activated. All our devices have BubbleUPnP on them. The central music area inside has a Sony SMP-N200 media player fed into it with pandora, access to our NAS music server, etc. All of it is controllable by using the BubbleUPnP app on any android. Volume controlled by Bose remote. Can also stream to BubbleUPnP with shoutcast, etc. Have read about the Grace Solo (mentioned by another poster above) and I am looking into that instead as the unit can be started from the android app (my aging Sony media player has to be manually turned on from inside...its android app does everything else besides power).

No I don't. However, my program works fine...I just occasionally want to deactivate it just for the one night so I can manually turn on the lights back there sooner. This is a rare occurrence that I want to control it in this manner.