ThisIsTheWay

Uploaded the ISY backup to my Polisy. First log in no devices were present but the programs were there. Trying a second time and now IoX finder refuses to find the device. When I add it, in IoX finder, it says "Not found" The polyglot dashboard at "https://192.168.1.7:3000/dashboard" is visible. Should I just wait longer, its been 10 min? EDIT: could not wait. pulled plug. seems ok now....should I be worried?

I ordered the Serial PLM Kit from UI. So I've got it all setup now thanks to the advice above. I'm using the serial port!

What is the correct connection for the Serial PLM Kit with a 2413S into Polisy Pro? Eth > Serial adapter > serial to USB > usb port on Polisy or Eth > Serial adapter > serial port on Polisy

I removed all Z-Wave and have those paired with my Home Assistant Box. Speaking of Home Assistant. Anyone have tips/advice for the transition form ISY to IOP for HA?

For some strange reason I cannot find the guide for how to move (and then deprecate) my ISY944i over to my Polisy Pro. Will it matter that my ISY944i is on version 5.3.4? IoX in Finder shows as version 5.5.3

That is helpful to know. I have a 2413S Serial Modem now and a the USB in the drawer if need be. Will keep using the 2413S

Will the 2448A7 work with EISY?

Would you be comfortable letting me know which brand/model of wifi controller and strip you prefer?

what does that mean?

Interesting. I will grab a Zooz 12/24v RGBW controller and see how that works. Seems to be compatible with home assistant so that fits the bill!

I have one from Magnitude and one from HitLights. The look exactly the same. The Magnitude has a noticeable buzz when dimming. The HitLight does not buzz but it only dimms down to about 50% then it starts to flicker. Thought there may be something better.

Can anyone suggest a nice quality dimmable 100w 24v LED transformer that will work well with Instron dimmers like 2477D?

Its great. I took the plunge a year ago. I ditched Polisy in favor of it. I pull all my other devices in to it. So, ISY, MyQ, ecobee, anything z-wave (Z-wave just worked better for me in Home Assistant than ISY), cameras, unifi controller, logitech remotes, elk m1, an MQTT broker, rain machine, synology, shelly devices. I've got really nice dashboards made for both desktop and mobile. Lots of customization possible here. Much nicer interface than anything I found on the direct ISY side. HA seems to be the go-to these days. Lots of development. Lots of devices supported.

I need to remove Polisy from my environment. I had a few nodes setup. Can someone please offer best practice to get myself back to pre-polisy state?

My issue also seemed to be with Hue Emulator. But i really cannot pinpoint this as I removed my Polisy nodeserver from my network and moved to Home Assistant.

Thank you for these notes from the WIKI. It was none of these issues. Oddly enough my password was reset to admin/admin and the time zone was changed from New York to California.... I cannot imagine what is going on but would be happy to swap out the hardware if it is slowly dying.

can you ping it? what version are you on? I'm on 5.3.0

now its back online and odly..the login credentials were reset. the login is now admin/admin neither mobilinc nor home assistant will connect....strange

I do not have portal. I have not updated in months. I do have polisy which strangely is still sending push notifications.

My ISY can be pinged from another computer. No programs are running. Cannot connect to admin console but the ISY launcher does see the device. Double click device and it asks for login and password. Three times it does not accept the credentials. Then it does and just sits blank. Power was on / off for a bit. Then I changed the power supply. Then it was on. Unit is a couple years old. Wonder if the ISY is dead. Any advice? Have an extra ISY....trying to avoid swapping and trashing the existing cause of the amount of work.

I could not find any threads regarding this node. I've attempted to enter all the config parameters but the node still shows as status "Disconnected" in poly web interface. I've added my log below. Not much to go by. Anyone have any advice or know where there may be a thread regarding this very cool node? 2021-03-08 16:54:20,995 MainThread polyinterface INFO polylogger:set_basic_config: set_basic_config: enable=True level=30 2021-03-08 16:54:22,097 MainThread polyinterface INFO polyinterface:init_interface: Received Config from STDIN. 2021-03-08 16:54:22,099 MainThread polyinterface INFO __init__:<module>: UDI Polyglot v2 Interface 2.1.0 Starting... 2021-03-08 16:54:22,104 MainThread polyinterface ERROR polyinterface:write: Traceback (most recent call last): 2021-03-08 16:54:22,105 MainThread polyinterface ERROR polyinterface:write: File "./unifi_poly.py", line 15, in <module> 2021-03-08 16:54:22,108 MainThread polyinterface ERROR polyinterface:write: from pushover import init, Client 2021-03-08 16:54:22,109 MainThread polyinterface ERROR polyinterface:write: ModuleNotFoundError 2021-03-08 16:54:22,109 MainThread polyinterface ERROR polyinterface:write: : 2021-03-08 16:54:22,110 MainThread polyinterface ERROR polyinterface:write: No module named 'pushover' 2021-03-08 16:56:48,144 MainThread polyinterface INFO polylogger:set_basic_config: set_basic_config: enable=True level=30 2021-03-08 16:56:49,277 MainThread polyinterface INFO polyinterface:init_interface: Received Config from STDIN. 2021-03-08 16:56:49,279 MainThread polyinterface INFO __init__:<module>: UDI Polyglot v2 Interface 2.1.0 Starting... 2021-03-08 16:56:49,284 MainThread polyinterface ERROR polyinterface:write: Traceback (most recent call last): 2021-03-08 16:56:49,286 MainThread polyinterface ERROR polyinterface:write: File "./unifi_poly.py", line 15, in <module> 2021-03-08 16:56:49,288 MainThread polyinterface ERROR polyinterface:write: from pushover import init, Client 2021-03-08 16:56:49,289 MainThread polyinterface ERROR polyinterface:write: ModuleNotFoundError 2021-03-08 16:56:49,290 MainThread polyinterface ERROR polyinterface:write: : 2021-03-08 16:56:49,291 MainThread polyinterface ERROR polyinterface:write: No module named 'pushover'

The issue ended up being the Hue Emulator on Polisy. It was stuck in some weird mode. Restarting Polisy fixed it.

I have a similar issue that also manifests where when I open UDI Admin Console, it says "Maximum subscribes reached" This can only be fixed by rebooting ISY. Looked at router, uninstalled mobilin and reinstalled/ removed all devices and started from scratch. Not sure where to go next.

Ok shutting off HA fixed the issue. Not sure what is wrong with HA, but at least I know it's the problem .

Hello! running 5.3.0. When I log in to the admin Console I get error "maximum subscribers reached" Then I get a window with title 'initializing" that shows "starting subscription" This loading never finishes. Also my instance of mobi linc pro on my iPhone keeps saying "Mobilinc disconnected. Attempting to reconnect to ISY" I am also running: - polisy box also looks to be working - HA. Which looks to be working . Anyone ever seen this/ know a fix?