rg65

I had purchased a Polisy before the Eisy came out. I have since purchased a Eisy for use at my home, but I am using the Polisy while I can (until the Eisy is back in stock) at my office to replace the ISY994 I had there. The process of switching from ISY994 to Polisy was fairly trouble free except for this: I have had a Remotetec ZRC-90 that has been working perfectly with the ISY, but does not work with the Polisy. I excluded it and included it back, but is only adding 2 nodes (Controller and Wake-up). None of the 8 scene buttons are showing up as scene controllers like they did in the ISY. My Polisy is on 5.8.0 I'm not sure how popular this little ZRC-90 is, but it has worked flawlessly for 5 years or so. If not, is there another scene controller (battery powered) that is tested with the Polisy?

I have been opening it up in the morning to see if this error occurs. I don't think it is open for hours at a time though. I'll shut it down and see if it still shows up. Thank you!

For the last month or so I have been getting this error. It is on my ISY (5.3.4). It is getting more and more frequent. I have tried the following but the error keeps on showing up: Cleared Java Cache Deleted and reinstalled java Replaced microSD card (following procedure that is documented and restored from an old backup that was known to be good) Moved the ISY to the same network switch as well as a different switch Replaced ISY power supply Pulled out some of my hair. The error is: Socket Open Failed javax.net.sslSSLHandshakeException: Remote host terminated the handshake I know the ISY isn't really supported and I will eventually replace it with and Eisy, but they are backordered. Does anyone have any ideas what could cause this? Thank you in advance!

Thanks! I restored from a much older archive and it works fine. Something must be corrupt in the latest 2 backups that won't let it show the programs. I'll just have to recreate all of my newest programs and scenes.

Just to clarify- I'm running 5.3.4 and it acts like it is creating the program list, but it just stops and shows no programs.

I have a strange issue that started a few days ago. The ISY994 at my office stopped showing the programs in the admin console. They still run, but I can't see them. I thought maybe the card was going bad, so I swapped to another ISY and it is doing the same thing. I did restore from a backup and I have tried multiple computers. I have also turned off firewalls just in case. Any ideas?

I have a similar thread running about motion detector lights with similar issues with other members helping me through it. My question is this: Why is WAIT not simply a normal WAIT command? Why does it have to re-evaluate the trigger before continuing? Maybe the ISY needs a new command like PAUSE. At the end of the pause, the program will continue to execute in order. In my case of the motion lights, I just want to start a process on a trigger (ex...motion), but the motion will probably not be triggered at that point so it terminates.

Thanks! I didn't want to go through the PLM swap procedure just to check it.

I don't know where this came from, but I found a 2413UH PLM in my box of rejects and X10 items. I know my ISY needs the serial version, but, if I change the USB daughter board in this one to the Serial version, should it work? I have a blown up 2413S that re-capping did not fix, but I have swapped the serial board into a known working 2413S and it works. Just wondering before I pitch it.

The 4 ft was a quick guess, but the stairs are slightly under 8". There are 4 steps then the step up to enter the house. So, in actuality, there are 5 steps at about 40 inches total. Yes, the kids don't lock the garage door.

Thanks for the comments! It is a door from the garage, and it is up 4 stairs (with no landing), so I am not worried about someone being able to get the leverage to kick it, although it would make for a funny video as they fell down 4 feet! I am working on my wife for the zwave tomorrow.

Thanks! I have the space, there are 4 2x4s stacked on that side of the door frame. I didn't think about the battery change outs. How long do the batteries last in these units?

I have 2 kids that obviously are unable to remember to lock a door. Does anyone know if it would work if I installed a hidden door sensor in the hole where the deadbolt goes in to sense if it is locked or not? I would set up a program to notify me after 10pm if the deadbolt was not activated. I know I can do this with Zwave deadbolts, but my wife likes the locks we have. Just wondering before I purchase one. Thanks in advance!

Thanks for the ideas! I have never heard of the global cache, and didn't think of the harmony hub. it will be my next project!

Too bad this didn't work. I always wanted to control my tv so that whenever someone rang my doorbell, my tv would automatically switch to another input to view the camera at the front door. This sounded like a promising way to do it. Maybe there is another way. Sent from my iPad using Tapatalk