mmb
-
Posts
629 -
Joined
-
Last visited
Posts posted by mmb
-
-
1 hour ago, Techman said:
The imports from Asia to North America have slowed to a crawl. It's out of UDI's control.
Well it’s on their store with no advisory, I suspect is more of a wait until we have enough orders to ship than slowed to a crawl.
-
Due to manufacturing issues, our vendor is currently experiencing delays, and we do not yet have an ETA.We are hoping to receive our shipment by early June 2025.It won't be early June, I've been through this before. I'll be lucky to see it by fall 2025.What's going on at UDI?
-
I tried this zigbee thermometer a year or more ago and couldn't get it to work with the EISY (or Polisy).
My son says it works fine with the Sonoff hub and Home Assistant.
Does anyone know it works now?
Thanks!
-
On 4/2/2025 at 5:33 PM, grossmd said:
Looking for suggestions to control my outdoor pool equipment. Currently have the pumps on older Insteon 240 V controllers but they’re showing signs of age. Looking for a switch that can be used with Eisy. I saw a enbrighten zwave but seems it may be discontinued. Any ideas?
My son was in the same situation, so we made one using a 120v/240v contactor, a 120v zwave plugin switch and a small utility box all purchased on Amazon. Assembly took about an hour. We adjusted electrical cables to suit.
I have an Enbrighten, functionally it's the same as we built.
On 4/3/2025 at 9:12 AM, drprm1 said:I have had one of these Aeotec controllers going on five years. Solid
I saw those controllers but they looked so light weight for the amp load they're controlling.
Interesting, thanks!
-
Not entirely what you're likely looking for but UD Mobile works quite well with Bluestacks 5 Android Emulator.
I installed the emulator then grabbed UD Mobile from the Google Play Store.
I haven't done extensive testing but lights and scenes turn off and on 👍
-
Personally, I've always found eisy.local never works. I've never bothered to understand why.
Using IP always works.
-
6 hours ago, Bob Amott said:
When entering http://1.2.3.4/desc Where 1.2.3.4 is the local address Iox returns "Not Found.
So, how do I start a ticket?
Try adding a port
-
-
I would submit a ticket then, they are are pretty prompt on their response time.
My bother had strange problems and Chris sorted it out pretty quickly.
The OS is pretty bullet proof.
-
Pretty rare you would have to do a reset.
Can you ssh to it?
-
10 minutes ago, palacekeeper said:
I didn't try the 8080 but did try the other one.
Did you make sure you used https with 8443 and not http?
-
42 minutes ago, palacekeeper said:
I tried both http://1.2.3.4/desc format and http://1.2.3.4:8443/desc and both with https but I get Not Found. I also cleared Java cache, apps, etc.
Is there something I need to do in order to be able to connect to the old one using the currently installed Java and Iox?
Thanks.
-
11 minutes ago, palacekeeper said:
Tied both http://1.2.3.4/desc format and http://1.2.3.4:8443/desc and both with https but I get Not Found. I also cleared Java cache, apps, etc.
Try pinging the IP address and see if it's alive.
-
Sorry but your post is a little confusing.
Here's my mini remote.
Mini Remote button A points to a Scene and the Scene includes the device to be controlled.
Does that help?
-
22 minutes ago, smokegrub said:
I feel I am being pushed where I do not want to go.
My 90 yr old parents are still on an ISY and Insteon switches. Making changes for them at this point would be too confusing for them so I leave things as is.
In any event, aside from a massive ISY failure, nothing has come along feature-wise that I feel compelled to change things for them anyway.
-
2
-
-
Much much better, now the logs make sense. Thanks for the help.
-
Thanks, I should have provided a sample of what I'm confronted with when opening the logs.
So disabled altogether (0) won't affect functionality of the plugin?
I haven't seen any problems worth investigating since I installed almost a year ago.
-
Hi, the DSC-Envisalink plugin for great!
Question, my IOX log file is overwhelmed with the number of DSC-Envisalink events, to the point where it's difficult to find other events in the file.
Is there anyway to turn off or suppress Envisalink the logs with something link Info, Critical, Debug etc.
Thanks!
-
On 2/14/2025 at 8:27 AM, KSP1138 said:
I don't have the Backup/Restore options under Z-Wave either. I have a Eisy and I'm currently using the Zooz 700 stick, but I have a ZMatter USB on the way.
Edit - And that's because it is only supported on the UD ZMatter USB. Thanks, Techman. DIdn't see that documented anywhere.
I wonder if the Z-Wave backup is actually used during the update or is it just in case of a disaster.
My brother has a Zooz dongle.
It would suck to re-add all his Z-Wave devices.
-
1 hour ago, pjjameso said:
Any suggestions
I would start a new thread as a starter.
There's lots of talent on this forum.
-
43 minutes ago, pjjameso said:
Okay, no idea why it worked on Polisy perfectly as one program, but to get it working on Eisy had to break into 3 programs. Issue solved so far...
'Airthings Controller / Main Level' CO₂ Level <= 775.0 PPM
And 'Airthings Controller / Main Level' VOC <= 225.0
I generally write device info to variables so you can pop into the AC and validate the program is working properly.
Question why wouldn't you use an OR Then On Else Off?
-
1 minute ago, pjjameso said:
Thanks you much! Dumb followup, how do you tell a program to run at startup?
Program Summary tab, right click the program and select Enable Run at Startup
-
1
-
-
1 hour ago, jec6613 said:
It's sending a unique ID, not its MAC address, to supported servers. This has been the new standard for a few years now to support IPv6 - that unique ID is not dependent on the NIC but is for the entire system, so a well designed system can multi-path over multiple NICs with multiple IPv6 addresses.
I know the OS can probably deal with IP6 but this is the first I've heard of it.
Does that extend to Portal UUID?
@jec6613 can you confirm you have an IP4 ip address?
-
53 minutes ago, wmcneil said:
I'm getting about 10 msec ping response. So there must some other overhead in the SMTP interaction that is taking significantly longer.
You're obviously special, my gmail smtp is sub 2 sec. on a Polisy.
I did have to increase the timeout from 1 sec because I was getting the error.
Ordered an eisy in Canada and got this...
in eisy
Posted
Yes, that was added after my order.