BamBamF16

Guys thanks for the suggestions. I was thinking along those lines but was wondering if there was a more elegant method.

Is it possible to limit echo to only an on or off for a given device or scene. For example I want to be able to only turn on a given light via echo but not turn off? Jeff

I just saw mobilinc is a skill. I would assume ISY as a coho would be better. Jeff

The fanlinc needs to be wired for power all the time, ie never switched. The KPL will be at via scenes or programs to control the fanlinc.

One other thing I do is add fast on to directly turn the fan of from any level. Add as a second or condition to the off program.

I have 4 programs for each fan I do this with. If fan off and KPL a control on then set fan hi If fan hi and KPL a control on then set fan med . .

I thought the relay node will indicate status equal to what it was when added. Bam2

That I can't answer. I set a hidden for sensor to update on levels for a light in a scene it controls based on the time of day. Occasionally it doesn't take right away because I have to reopen the door abd close to turn the scene in with new values. Abd the controlled light is in the dog room and I'm not in there. Jeff

Brian, mine do.

Thanks for that tip! It is indeed CLITEMP for this one as well. Jeff

Thanks guys. I'll try that. Any idea on the parameter I might use to get temp from the ZWave MS?

This issue has always been present. I am just now seeing if I can fix it. When I get a notification via isy every one comes from a different but sequential number. I send my messages through Gmail's smtp server. They are routed through mynumber@att.net (forget the exact address but it is the default for AT&T test message via email). Is there a way to make the come from the same number so they group as a conversation? I am also looking for the correct parameter to get the temperature from a ZWave mti sensor? ST does not work. I can get the valid name and address but not formatted parameter value. Thanks Jeff

I'm not in front of my computer but is it possible to add 2 time criteria to an if statement? If from 430 to sunrise (next day) And From sunset-2 hr to sunrise (next day) Then .... Else That would evaluate at both 430 and ss-2 hr, and sunrise correct? And would only be true when inside both time conditions? Of course if you can't enter 2 time conditions then ignore all of my silliness. Jeff

If you have mobilinc you could set a geo-fence around your home and only allow the open command to function when your phone is inside the zone. A clunky version of two-factor authentication.

There are many DCs that run on a 110/15 amp circuit. The biggest I've found is 1.75hp. My tablesaw is 1.75 hp and runs on a 15a circuit. I would think the outdoor middle would work.

You updated to your new application specific password? Just changing your main Google password shouldn't prompt a change in isy I would think. Jeff

It looks like there isn't a trigger for the program if the tstat was already in heat mode. Jeff

I guess I could do it via scenes. My issue was I couldn't find feedbacks for fan speed only light brightness. Jeff

Sorry for the confusion. I want to control/view fanlinc status in roomie remote. Jeff

Is there any way to adjust and view fanlinc status?

I figured it out. It was my non-standard http port. Had to manually adjust parameters ask is good now. Jeff

Thanks for the reply. I finally got customizing some stuff in roomie. I didn't realize what ask you could change from their defaults. Howeverco can't get roomie to access the isy. Roomie sees it and lets me add. But it won't download the manifested devices. Any thoughts? Username and password are set correctly. Jeff

Eric, is there a good tutorial on customizing roomie remote? I gave up on it because I disliked the auto layouts. I couldn't move buttons around like I wanted. iRule is becoming to programming intensive for me so I am looking for good alternatives. Jeff