inovermyhead

I have a similar question (and I also made the same mistake of not recognizing the Insteon address inside the case when I put in the battery). The "closed" device/node never shows any status, nor changes in status when the sensor is manually opened and closed (the "opened" device/node does respond appropriately). In a test program I can add an if statement including control or status for the "closed" device/node (and a "then" statement to turn on a nearby light) (and I did both enable the program and save it) but get no response of the light to manually opening and closing the sensor. The light responds correctly if the "if" statement references the "opened" device/node The "heartbeat" node does show up as on after ~24 hours.

Duh. That's embarrassing. I'm not sure how I could have opened the sensor to insert the battery and missed the Insteon address label right next to the battery contacts. Clearly, it wouldn't make sense to put the label on the bottom of the sensor, like most Insteon devices, because the first use of the double-stick tape on the sensor would cover and/or obliterate the label. Thanks Paul

I purchased a number of Insteon sensors during Smarthome's recent sale but I'm having trouble, or missing something, with the Open/Close sensors, model 2843-222: They don't have a six digit Insteon ID address label on the bottom (none of the three sensors I bought). So when I try to add them in the AI, I don't have an address to put in. I open the "new Insteon/A10/X10 device" window, put in a name, choose the correct device type from the pull down list, put the sensor in communication mode (green LED flashing slowly) and then hit "OK". The window disappears and nothing more happens. No updating devices/links window, the ready/busy flag in the lower left corner of the AI remains green/ready, and I can't find the device added to the list anywhere in the device/scene tree. What am I doing wrong or missing? I thought all Insteon devices had to have a six digit address? Thanks, John

Nicely done sir. Very clear setup instructions. I can imagine lots of uses for this (first one will be tying the leak detection programs to a verbal notification......). I did leave a positive review on the Alexa skill page,