PhanTomiZ

Yes, the first time I must have selected the wrong MS. The one in question is 31.F3.4E...Any ideas?

31 F3 64 is another MS...31 F3 4E is the one I put into linking mode... 31 F3 64 must have gotten triggered some how when I put 31 F3 4E in linking mode....Here is the Event Viewer.... Sun 03/01/2015 04:59:45 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 05:00:01 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 05:00:04 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 05:00:08 PM : [All ] Writing 0 bytes to devices Every time I select an option I get this Writing 0 bytes...

I thought I did? Motion Sensed Current State On Sun 03/01/2015 04:34:17 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 11 01 LTONRR (01) Sun 03/01/2015 04:34:17 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:34:17 PM : [D2D EVENT ] Event [31 F3 4E 1] [DON] [1] uom=0 prec=-1 Sun 03/01/2015 04:34:17 PM : [ 31 F3 4E 1] DON 1 Sun 03/01/2015 04:34:17 PM : [D2D EVENT ] Event [31 F3 4E 1] [sT] [255] uom=0 prec=-1 Sun 03/01/2015 04:34:17 PM : [ 31 F3 4E 1] ST 255 Sun 03/01/2015 04:34:17 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 11 01 LTONRR (01) Sun 03/01/2015 04:34:17 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:34:17 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:34:17 PM : [iNST-SRX ] 02 50 31.F3.4E 33.5E.55 45 11 01 LTONRR (01) Sun 03/01/2015 04:34:17 PM : [std-Cleanup ] 31.F3.4E-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Sun 03/01/2015 04:34:17 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:34:18 PM : [iNST-SRX ] 02 50 31.F3.4E 11.01.01 CF 06 00 (00) Sun 03/01/2015 04:34:18 PM : [std-Group ] 31.F3.4E-->11.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:34:18 PM : [iNST-INFO ] Previous message ignored. Sun 03/01/2015 04:34:18 PM : [iNST-SRX ] 02 50 31.F3.4E 11.01.01 CF 06 00 (00) Sun 03/01/2015 04:34:18 PM : [std-Group ] 31.F3.4E-->11.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:34:18 PM : [iNST-INFO ] Previous message ignored. Motion Timeout Current State Off Sun 03/01/2015 04:37:57 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 13 01 LTOFFRR(01) Sun 03/01/2015 04:37:57 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:37:57 PM : [D2D EVENT ] Event [31 F3 4E 1] [DOF] [1] uom=0 prec=-1 Sun 03/01/2015 04:37:57 PM : [ 31 F3 4E 1] DOF 1 Sun 03/01/2015 04:37:57 PM : [D2D EVENT ] Event [31 F3 4E 1] [sT] [0] uom=0 prec=-1 Sun 03/01/2015 04:37:57 PM : [ 31 F3 4E 1] ST 0 Sun 03/01/2015 04:37:57 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 13 01 LTOFFRR(01) Sun 03/01/2015 04:37:57 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:37:57 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:37:57 PM : [iNST-SRX ] 02 50 31.F3.4E 33.5E.55 45 13 01 LTOFFRR(01) Sun 03/01/2015 04:37:57 PM : [std-Cleanup ] 31.F3.4E-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Sun 03/01/2015 04:37:57 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:37:57 PM : [iNST-SRX ] 02 50 31.F3.4E 13.01.01 CF 06 00 (00) Sun 03/01/2015 04:37:57 PM : [std-Group ] 31.F3.4E-->13.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:37:57 PM : [iNST-INFO ] Previous message ignored. Sun 03/01/2015 04:37:58 PM : [iNST-SRX ] 02 50 31.F3.4E 13.01.01 CF 06 00 (00) Sun 03/01/2015 04:37:58 PM : [std-Group ] 31.F3.4E-->13.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:37:58 PM : [iNST-INFO ] Previous message ignored.

Yes, that is the correct device/address...Ok, if it is not responding, then how can it still be functioning. It shows the current state of On and Off when motion sensed for .5 min This is when motion is triggered, Current State ON then OFF Sun 03/01/2015 04:27:16 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 11 01 LTONRR (01) Sun 03/01/2015 04:27:16 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:27:16 PM : [D2D EVENT ] Event [31 F3 4E 1] [DON] [1] uom=0 prec=-1 Sun 03/01/2015 04:27:16 PM : [ 31 F3 4E 1] DON 1 Sun 03/01/2015 04:27:16 PM : [D2D EVENT ] Event [31 F3 4E 1] [sT] [255] uom=0 prec=-1 Sun 03/01/2015 04:27:16 PM : [ 31 F3 4E 1] ST 255 Sun 03/01/2015 04:27:17 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 11 01 LTONRR (01) Sun 03/01/2015 04:27:17 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:27:17 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:27:17 PM : [iNST-SRX ] 02 50 31.F3.4E 33.5E.55 45 11 01 LTONRR (01) Sun 03/01/2015 04:27:17 PM : [std-Cleanup ] 31.F3.4E-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Sun 03/01/2015 04:27:17 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:27:17 PM : [iNST-SRX ] 02 50 31.F3.4E 11.01.01 CF 06 00 (00) Sun 03/01/2015 04:27:17 PM : [std-Group ] 31.F3.4E-->11.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:27:17 PM : [iNST-INFO ] Previous message ignored. Sun 03/01/2015 04:27:17 PM : [iNST-SRX ] 02 50 31.F3.4E 11.01.01 CF 06 00 (00) Sun 03/01/2015 04:27:17 PM : [std-Group ] 31.F3.4E-->11.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:27:17 PM : [iNST-INFO ] Previous message ignored. Sun 03/01/2015 04:28:16 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 13 01 LTOFFRR(01) Sun 03/01/2015 04:28:16 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:28:16 PM : [D2D EVENT ] Event [31 F3 4E 1] [DOF] [1] uom=0 prec=-1 Sun 03/01/2015 04:28:16 PM : [ 31 F3 4E 1] DOF 1 Sun 03/01/2015 04:28:16 PM : [D2D EVENT ] Event [31 F3 4E 1] [sT] [0] uom=0 prec=-1 Sun 03/01/2015 04:28:16 PM : [ 31 F3 4E 1] ST 0 Sun 03/01/2015 04:28:16 PM : [iNST-SRX ] 02 50 31.F3.4E 00.00.01 CF 13 01 LTOFFRR(01) Sun 03/01/2015 04:28:16 PM : [std-Group ] 31.F3.4E-->Group=1, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:28:16 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:28:16 PM : [iNST-SRX ] 02 50 31.F3.4E 33.5E.55 45 13 01 LTOFFRR(01) Sun 03/01/2015 04:28:16 PM : [std-Cleanup ] 31.F3.4E-->ISY/PLM Group=1, Max Hops=1, Hops Left=1 Sun 03/01/2015 04:28:16 PM : [iNST-DUP ] Previous message ignored. Sun 03/01/2015 04:28:17 PM : [iNST-SRX ] 02 50 31.F3.4E 13.01.01 CF 06 00 (00) Sun 03/01/2015 04:28:17 PM : [std-Group ] 31.F3.4E-->13.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:28:17 PM : [iNST-INFO ] Previous message ignored. Sun 03/01/2015 04:28:17 PM : [iNST-SRX ] 02 50 31.F3.4E 13.01.01 CF 06 00 (00) Sun 03/01/2015 04:28:17 PM : [std-Group ] 31.F3.4E-->13.01.01, Max Hops=3, Hops Left=3 Sun 03/01/2015 04:28:17 PM : [iNST-INFO ] Previous message ignored.

Here's the info...Not sure what it all means... Sun 03/01/2015 03:36:58 PM : [All ] Writing 33 bytes to devices Sun 03/01/2015 03:36:58 PM : [iNST-TX-I1 ] 02 62 31 F3 64 0F 0D 00 Sun 03/01/2015 03:36:58 PM : [iNST-ACK ] 02 62 31.F3.64 0F 0D 00 06 (00) Sun 03/01/2015 03:37:07 PM : [iNST-TX-I1 ] 02 62 31 F3 64 0F 0D 00 Sun 03/01/2015 03:37:07 PM : [iNST-ACK ] 02 62 31.F3.64 0F 0D 00 06 (00) Sun 03/01/2015 03:37:16 PM : [iNST-TX-I1 ] 02 62 31 F3 64 0F 0D 00 Sun 03/01/2015 03:37:16 PM : [iNST-ACK ] 02 62 31.F3.64 0F 0D 00 06 (00) Sun 03/01/2015 03:37:20 PM : [D2D EVENT ] Event [31 F3 64 1] [ERR] [1] uom=0 prec=-1 Sun 03/01/2015 03:37:20 PM : [ 31 F3 64 1] ERR 1 Sun 03/01/2015 03:37:35 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 03:37:46 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 03:37:55 PM : [All ] Writing 0 bytes to devices Sun 03/01/2015 03:38:58 PM : [iNST-SRX ] 02 50 29.25.2C 33.5E.55 05 6F 21 (21) Sun 03/01/2015 03:38:58 PM : [std-Direct ] 29.25.2C-->ISY/PLM Group=0, Max Hops=1, Hops Left=1 Sun 03/01/2015 03:38:58 PM : [D2D EVENT ] Event [29 25 2C 1] [CLIHUM] [33] uom=0 prec=-1 Sun 03/01/2015 03:38:58 PM : [ 29 25 2C 1] CLIHUM 33 Sun 03/01/2015 03:38:58 PM : [D2D-CMP 0010] STS [29 25 2C 1] CLIHUM op=3 Event(val=33 uom=0 prec=-1) > Condition(val=50 uom=0 prec=-1) --> false This after setting the timeout to 20 Then Brightness to 35 Then Darkness to 35 Then LED On Then Query Thanks...

It is currently within 3' of both PLM and On/off device. I find it easier to remove the MS from its location and bring to my computer room for setup.... I will Run Tools | Diagnostics | Event Viewer at LEVEL 3. as soon as I arrive home from work. Thanks

Hi, I have almost finished migrating from HL to ISY994izw. I moved two 2842-222 motion sensors from HL, first by deleting all links, which I didn't have any because I was using them in events only, and then doing a factory reset. Linking them to the ISY was accomplished by using the drop down menu for Motion sensor. I enabled linking mode for the each individual sensor and entered the address and name for each device. Looks like the ISY recognized them both and added them to the left side device pane. What I want to do next is change the device options. After enabling the linking mode on the device, I can't get the motion sensors to save the options. Each time I set any option I get "Request Failed". The option gets changed, but I believe not saved to the device. It seems that as long as the Admin console is running, the values stay, but as soon as I close the program and re-open, the Device Options go back to the default... The devices look to be functioning correctly, but only with the default settings. Any information would be greatly appreciated... PhanTomiZ

Well, they think that by increasing it 6 or 10 or 15 degrees will some how output more heat from the furnace. Setpoint is not a factor of output from the furnace, but rather time. They would have to wait 20 minutes for the second stage to come on, but by then they already feel the extra heat. Oh yea, did I mention the sunglasses, bathing suit and sunscreen???

This is what mine looks like with Hotmail.com when I open the email... Current Temp is 66.00� Setpoint 66.00� Humidity 34.00%‏ When I look in the Hotmail specific folder, I see the degree's symbol. This is what I want to see When I forward this email to my cell phone (email to text), all I see is "Current Temp is"... PhanTomiZ

Can't believe I missed that. I have the wiki ISY-99i Series INSTEON:Custom Email Substitution Variablesopened to my left, trying to decipher and I didn't catch the "1.ST" Thanks again, I will now be able to build some great informational emails. PhanTomiZ

I got the program part working, but the message part is not working as I would have expected.... Custom Notification 'Send Temperature' Subject: ${sys.node.29 25 2C.ST} Body: ${sys.node.29 25 2C.ST} ${sys.node.29 25 2C.CLISPH} When I run (if), the outcome is this: Subject : node[29 25 2C]‏Body: node[29 25 2C]node[29 25 2C] What am I missing? Thanks PhanTomiZ

Thanks for the spoon feed. I will try this when I get home tonight and I'll let you know how it turned out... Can I move the body of the message to the subject to see the actual ? Much quicker to see changes rather than having to open the email... Thanks PhanTomiZ

Using an Insteon wired thermostat...

Sorry for the Newbie question. How do I retrieve the actual temperature, and send it in an email for every 1 degree temperature change? Thanks