TJF1960

Count me in for testing as well @Michel Kohanim -Tim

Hello @dakall, if you are looking simply for a trigger for programs based on solar noon have a look at io_guy's Nodelink plug in. His "Additional ISY Data" plug in offers Zenith, Azimuth and Elevation figures based on your lat/long., The downside is that its not available on PG3. It will run on a raspberry pi or windows. If you are familiar with FreeBSD you can get it to run on eISY. And, sadly it is no longer supported. With that said, once installed it does work well currently. I also second @Northwoods Ranger comment about using Lux maybe in addition to solar noon. Here is the link to Nodelink on this forum:

I am too, so it may not be your device. -Tim

Great idea. Sometimes getting the stream can be a pain. Here are 4 I use all the time: Swing===http://radio.bigblueswing.com:8002/;64bit.mp3, Mix-RP===http://stream.radioparadise.com/aac-128, Rock-RP===http://stream.radioparadise.com/rock-128, Mellow-RP===http://stream.radioparadise.com/mellow-128,

Hey @macjeff give this a try: https://15313.live.streamtheworld.com/WTOPFM.mp3?dist=hubbard&source=hubbard-web&ttag=web&gdpr=0 -Tim

Yes, mine too are TTS. -Tim

@Michel Kohanim, After upgrading to the new version of AudioPlayer there was not a custom parameter called stations. I updated, then reinstalled it 2 or 3 times with no change. I deleted it from the slot and then installed it into the same slot. Now the stations parameter showing. Steaming works great! Thanks Michel! sound bite sent. -Tim

I can confirm the same as @garybixler with the volume resetting back to 100% as well as the stopping too soon of the custom messages. Mine are stored on the same drive as the samples, just a different folder. Question on adding radio streaming. I imagined that name is placed in "Key" and url placed in "Value" in PG3 > AudioPlayer but it doesn't seem to work. Edit: I moved one of my sound clips to the "sounds" file in PG3 and the player still cuts the audio short. AudioPlayer seems to play about 4 seconds of a 6 second clip.

I look forward to the next time change! Thank you for sharing @hart2hart! -Tim

Hi @hart2hart, I would be interested in seeing your program to reboot ISY if you wouldn't mind posting it, when you have the chance. Thanks, -Tim

I don't believe the rev was bumped, for whatever reason. I did as @macjeff, uninstalled and reinstalled the plug in. After completion the check box was present in the config page for the plug in. v1.0.12 is the version I had before and after the reinstall. -Tim

Hello @simplextech, Upgraded PG3 to v3.2.19 and ST-Inventory no longer works. @bmercier suggested this: The author needs to edit his store entry and check "Require ISY Access". Then, in the configuration page, PG3x will display the "Allow ISY Access" checkbox. Any help would be appreciated. I have debug logs if needed. Thanks! -Tim

Hi @bmercier, Upgrade went well except for ST-Inventory threw a lot of messages in UD Mobile, saying it was connected. However no data is populated in the AC. All other plugins are working fine for me. Nodelink continues to work well on eISY after update thankfully. I have sent you a pm with logs.

Hello @bmercier, question. I am running Nodelink on eISY which is not a plug in on PG3 but I believe it uses Rest. Is the Rest API warning only for PG3 plug ins or anything that uses Rest to communicate with eISY? Thanks! -Tim

Performed upgrade yesterday, deleted mirror after making sure all was well. Thank you Michel and team for another amazing and eISY upgrade! -Tim

Hi @maxnorth, If I recall, from the Admin Console select the main (on-off) node of the 6-button KPL. Select "Buttons Toggle Mode." Select the first node (main on-off node) and select "Non-Toggle." At the KPL push the on button then the off button. The on LED behind the button will turn on and off as normal. When the press the off button the off LED should remain off now.

I am looking for performance so I will not select mirror. Once the process of converting from emmc to nvme is done, emmc is wiped out and the OS is installed and ran from the new nvme. God forbid something happens down the line and the nvme goes bad, what is the recovery process aside from installing a new ssd? Also, is there a way to clone the newly installed drive to another ssd just for a backup in the even a failure occurs? Finally, is the emmc available for any purpose or is it bypassed completely and not used? Thanks, Tim

I am having the same issue with the installation, "setup_nvme_boot: command not found" I even tried adding .sh to the end of the command " setup_nvme_boot.sh: command not found -Tim

Hi @Panda88, The leak sensor went offline yesterday. I was not able to capture it go offline with debug on. But I turned debug on this morning then queried the device then an hour or so later I pushed the link button on the bottom of the device and it reconnected. I have Attached and pm'ed you the logs, hopefully they will help. I am leaving debug on to catch the next time the leak sensor goes offline. After pressing the link button, the Yolink app should the status as connected. The Yolink plug in in the admin console did update the temp from 79 to 66 degrees, so the temp is working, just not the connection status. Thank you so much! -Tim

@Panda88, Thank you for this plugin! It has been working flawlessly for me. I have been using it for about 3 or 4 months and it is working awesome. I am trying to set up a program to let me know when one of the leak sensors fails. I have 1 out of 10 that fails intermittently. YoLink will send me an email, but I don't check my emails nearly as often as I should so it may be 3 or more days before I realize there is a problem. I noticed In the Yolink phone app, in the details page for the sensor, that they do offer State (Normal or Offline) as well as Battery level, Signal Intensity and Temperature readings. This may be a huge ask, but I was wondering if some or all of those could be implemented? Thanks for your time and contributions to this forum! btw, anyone considering Yolink, I have found that while they are cloud based, the devices are easy to link, and are very quick to respond in both the phone app as well as @Panda88's plugin. Their system is by far one of the best and easiest to set up and deploy that I have seen. -Tim

I moved over all of my message mp3's from a pi4 to eisy. An amp is connected to the eisy which drives small speakers in each room of the house. Reminders such as to put the garbage cans out or there is someone at the front door or the garage door is still open and more important ones such as a water leak detected. I love that with the addition of this plug in, my pi4 that was used for PG2 and Nodelink and audio spokens is almost decommissioned. The plug in is simple to setup and executes quickly and painlessly. Thanks Michel!!! -Tim

Thanks! Did you restart the Vue node server after Emporia was back up and running? Mine started working after restarting the node server.

Last night the api for Emporia Vue went down, came back up this morning. It seems I was not the only one, there were some reports on their forum. I waited a couple of hours after it was back up but the Vue plugin did not seem to connect back up to the emporia server, at least none of the values were ever updated in IoX. Once I restarted the plug in all the values repopulated in IoX and it has seemed to run and control emporia switch plugs just fine. I went to look at the logs but they never populated in PGx. I do have rolling logs from PGx but not sure what I am looking for. PGx f/w 3.2.16 Vue 1.0.26 IoX 5.7.1 If you would like to look at the logs, please let me know where to send them. Thanks! Tim

Same here! Thank you!!!

Hi all, If anyone is interested in purchasing CAO tag manager and tags just pm me. I have: 10 Quad Leak Sensor (were in service, less than 6 months, all working fine when removed) 2 Quad Leak Sensor (brand new) 4 Tag Pro (ALS) (at least 4 that were in service and working fine, may have more but no guarantee) 3 Tag Accelerometer Based (3 that I know of which were removed from service today and were working fine, like more) 5 Misc tags (not sure which version 2 Tag Managers (1 less than 3 month old, other is approx 5 years old) If anyone is interested just let me know. PM offer. Thanks!