jrini Posted August 9, 2013 Author Posted August 9, 2013 Only the devices previously described in the various Event Viewer Level 3 with device identification tables. My house is 30' long. The Insteon FanLincs are all 7 1/2' from either the front or rear of the house. The KPLs and other Dual-Band SwitchLincs are concentrated around the geometric center of the house on all three floors and near the center of the front wall of the middle floor. The SynchroLinc will be the first device near the rear wall. It will be near the middle of the rear wall in the mechanical room. Any suggestions on where to place Access Points will be appreciated.
jrini Posted August 10, 2013 Author Posted August 10, 2013 Today I bought a Medium Light Socket Adapter so that I could eliminate the X-10 Lamp Module. Using an outlet on the 20 amp branch circuit in my office area I got the following Event Viewer Level 3 trace. The SynchroLinc is at 18.F8.5F. Sat 08/10/2013 06:00:36 PM : [iNST-SRX ] 02 50 18.F8.5F 00.00.01 C7 13 00 LTOFFRR(00)Sat 08/10/2013 06:00:36 PM : [std-Group ] 18.F8.5F-->Group=1, Max Hops=3, Hops Left=1 Sat 08/10/2013 06:00:36 PM : [ 18 F8 5F 1] DOF 0 Sat 08/10/2013 06:00:36 PM : [ 18 F8 5F 1] ST 0 Sat 08/10/2013 06:00:37 PM : [iNST-SRX ] 02 50 18.F8.5F 1F.21.A9 41 13 01 LTOFFRR(01) Sat 08/10/2013 06:00:37 PM : [std-Cleanup ] 18.F8.5F-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Sat 08/10/2013 06:00:37 PM : [iNST-DUP ] Previous message ignored. Sat 08/10/2013 06:00:52 PM : [iNST-SRX ] 02 50 18.F8.5F 00.00.01 C7 11 00 LTONRR (00) Sat 08/10/2013 06:00:52 PM : [std-Group ] 18.F8.5F-->Group=1, Max Hops=3, Hops Left=1 Sat 08/10/2013 06:00:52 PM : [ 18 F8 5F 1] DON 0 Sat 08/10/2013 06:00:52 PM : [ 18 F8 5F 1] ST 255 Sat 08/10/2013 06:00:53 PM : [iNST-SRX ] 02 50 18.F8.5F 1F.21.A9 41 11 01 LTONRR (01) Sat 08/10/2013 06:00:53 PM : [std-Cleanup ] 18.F8.5F-->ISY/PLM Group=1, Max Hops=1, Hops Left=0 Sat 08/10/2013 06:00:53 PM : [iNST-DUP ] Previous message ignored. The ISY still could not communicate with the SynchoLink when it is in the Mechamical Room. So I will be ordering some Access Points.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.