Jump to content

Network Module Rules

db2ace2

By db2ace2
in ISY994

Recommended Posts

db2ace2 Member

db2ace2

Posted
Posted

Where are the Network Module Rules defined.

 

I am getting a Net Module Rule 2:715 when I execute a Network Resource Post command.

 

Where can I find these messages defined?

 

 

Thanks

Charles Seiler

db2ace2 Member

db2ace2

Posted
  • Author
Posted

Hello,

 

There must be some DOC on how to setup and use the Network Resources to POST a REST command from one ISY to another? No matter what I do I cannot seem to get it to work, and I still cannot find the Error Messages Documented anywhere.

 

Is this a Security Issue? I have a Self Signed Server CA for Both ISY's. Is there additional Windows or Router Setup needed? Both ISY's are on the same local Router both using PORT 80.

 

 

I am trying to set up a Network Resource to POST from ISY#1 to ISY#2 a /REST/X10/C12/3 command.

 

POST / HTTP/1.1

Host: 192.168.1.245:80

User-Agent: Mozilla/4.0

Connection: Close

Content-Type: application/x-www-form-urlencoded

Content-Length: 15

Authorization: Basic XXXXXXXXXXXXXXXXXXXXXX==

 

/rest/X10/C12/3

 

When I Test this I get a TCP client request Failed (Net Module Rule 1:715) I tried with and without Basic Authorization in the request. (XX'd Out the BASE64 in the above.)

 

I would not think this would be all that complicated. I am already using REST commands to send REST commands from Camera Devices to the ISY and that works great. I would think I should be able to send a REST command from one ISY to another just as easily?

 

Any Ideas what this error is, and what I need to do to get this working? Is this a Security Error or is something else wrong? Is this a SSL CA Certificate Issue and if so what do I need to fix this? This is critical to my continued use of ISY.

 

 

Thanks

Charles Seiler

Michel Kohanim Wise Elder

Michel Kohanim

Posted
Posted

Hi Charles,

 

,

There must be some DOC on how to setup and use the Network Resources to POST a REST command from one ISY to another? No matter what I do I cannot seem to get it to work, and I still cannot find the Error Messages Documented anywhere.

Unfortunately not. Network resources assumes that you already know about basic HTTP/TCP communications (unfortunately).

 

Is this a Security Issue? I have a Self Signed Server CA for Both ISY's. Is there additional Windows or Router Setup needed? Both ISY's are on the same local Router both using PORT 80.

Not as long as you follow Basic64 encoding.

 

I am trying to set up a Network Resource to POST from ISY#1 to ISY#2 a /REST/X10/C12/3 command.

 

POST / HTTP/1.1

Host: 192.168.1.245:80

User-Agent: Mozilla/4.0

Connection: Close

Content-Type: application/x-www-form-urlencoded

Content-Length: 15

Authorization: Basic XXXXXXXXXXXXXXXXXXXXXX==

 

/rest/X10/C12/3

The problem is that that the POST to ISY does not have a body. So, you should put /rest/X10/C12/3 in the Path and NOT the Body.

 

With kind regards,

Michel

db2ace2 Member

db2ace2

Posted
  • Author
Posted

Thanks Michel for all the help with Network Resources Rest Interface. I seem to have it working now as far as using Network Resources to set values of Variables on the second ISY, and also issuing DON/DOF/Beep etc. directly to devices and Scenes on the second ISY so that's progress, and I am learning which is always a great thing.

 

Just a couple of additional questions if I may?

 

Q#1 Is it possible to have ISY#1 send a rest/vars/set Command to set a variable on ISY#2 to the value of another variable on ISY#2? If so how would this be coded?

 

Q#2 Similarly is it possible to have ISY#1 send a rest/vars/set command to set a variable on ISY#2 to the value of a variable on ISY#1? Thus far I do this by encoding the variables value in the rest command as a literal value but I wasn't sure how to code it to use a variable name from the ISY#1 in the command being sent to ISY#2.

 

Q#3 Could you also provide an example of how to code the rest/vars/set command to set the value to a string Value?

 

Thanks Again for your help. You saved me as an ISY User and allowed me to move forward with several projects I am in the midst of.

 

Charles Seiler

Xathros Advanced

Xathros

Posted
Posted

It has been mentioned in the past that an upcoming update may allow the use of variables within network resources. I'm hopeful that we will see this in the next release. If so, then the answers to Q1 & 2 will be yes. For the moment however, we cannot do that.

 

-Xathros

  • 1 year later...
Pazium Newbie

Pazium

Posted
Posted

Can you tell me why I am getting this error

TCP Client DNS error

api.aerisapi.com

 

TCP client Request Failed

{Net Module Rule:42:500}

 

My request looks iike this

 

POST /sony/IRCC HTTP/1.1
Host: 192.168.1.24:80
User-Agent: TVSideView/2.0.1 CFNetwork/672.0.8 Darwin/14.0.0'
Connection: keep-alive
Content-Type: text/xml; charset=UTF-8
SOAPACTION: urn:schemas-sony-com:service:IRCC:1#X_SendIRCC
Content-Length: 316
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Encoding: gzip, deflate
 
<?xml version="1.0"?>
  <s:Body>
    <u:X_SendIRCC xmlns:u="urn:schemas-sony-com:service:IRCC:1">
      <IRCCCode>AAAAAQAAAAEAAAAvAw==</IRCCCode>
    </u:X_SendIRCC>
  </s:Body>
</s:Envelope>
 
The turns off the TV, a Sony Bravia KDL 48w600B
 
Thanx
 
Mike
Michel Kohanim Wise Elder

Michel Kohanim

Posted
Posted

Hi Pazium,

 

{Net Module Rule:42:500} => you are getting a status code of 500 which means internal server error. So, it does not like something in the payload.

 

My suggestions in order of priority:

1. The contents of SOAPACTION must be in quotes ... i.e. "urn:schemas-sony-com:service:IRCC:1#X_SendIRCC"

2. Remove user-agent or use the default

3. Remove accept-encoding

4. Remove accept

5. Change connection to close

 

With kind regards,

Michel

Pazium Newbie

Pazium

Posted
Posted

i have hamweather installed

 

 

thanx, in will try each.

 

the contents works great with my kdl 32w650a. it has the nginx server

i dont know if the kdl 48w600b has the same. i understand it runs debian linux.

i'll let you know how it works out

Pazium Newbie

Pazium

Posted
Posted

Thanx Michel for your help.

None of those worked. I still get the same error with of the suggestions The 42:500 error

 

Well it looks like this now:

POST /sony/IRCC HTTP/1.1
Host: 192.168.1.18:80
User-Agent: TVSideView/2.0.1 CFNetwork/672.0.8 Darwin/14.0.0
Connection: keep-alive
SOAPACTION: "urn:schemas-sony-com:service:IRCC:1#X_SendIRCC"
Content-Length: 316
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Encoding: gzip, deflate
Content-Type: "text/xml; charset=UTF-8"
 
<?xml version="1.0"?>
  <s:Body>
    <u:X_SendIRCC xmlns:u="urn:schemas-sony-com:service:IRCC:1">
      <IRCCCode>AAAAAQAAAAEAAAAvAw==</IRCCCode>
    </u:X_SendIRCC>
  </s:Body>
</s:Envelope>
 
it is based on this link
 
 
Which has this python code:
 
headers = { 'User-Agent': 'TVSideView/2.0.1 CFNetwork/672.0.8 Darwin/14.0.0', 'Content-Type': 'text/xml; charset=UTF-8', 'SOAPACTION': '"urn:schemas-sony-com:service:IRCC:1#X_SendIRCC"', 'Accept': 'text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8', 'Accept-Encoding': 'gzip, deflate', 'Connection': 'keep-alive', } content = """<?xml version="1.0"?> <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/" s:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"> <s:Body> <u:X_SendIRCC xmlns:u="urn:schemas-sony-com:service:IRCC:1"> <IRCCCode>AAAAAQAAAAEAAAAvAw==</IRCCCode> </u:X_SendIRCC> </s:Body> </s:Envelope>""" url = 'http://this-is-the-ip-of-the-tv/sony/IRCC' response = requests.post(url, data=content, headers=headers) print(response)
 
Like I said I know it works for the other Bravia
 
Thank you very much.
Michel Kohanim Wise Elder

Michel Kohanim

Posted
Posted

Hi Pazium,

 

The difference is that your snippet does not have quotes for the value of content-type while ISY rule does. It's definitely payload related.

 

Are you certain the value of IRCCode is valid?

 

With kind regards,

Michel

Pazium Newbie

Pazium

Posted
Posted

i did have the quotes off at one point. I'll take them off and get back to you.

 

The IRCCode comes form the xml as this

<av:X_IRCCCode command="Power OFF">AAAAAQAAAAEAAAAvAw==</av:X_IRCCCode>

 

I copied the content using the copy command from the line that works for the other Bravia.

Both Bravias use nginx web servers 

Pazium Newbie

Pazium

Posted
Posted

i used Magpe on the bravia and got all of this:

<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<device>
<deviceType>urn:schemas-upnp-org:device:MediaRenderer:1</deviceType>
<friendlyName>BRAVIA KDL-48W600B</friendlyName>
<manufacturer>Sony Corporation</manufacturer>
<modelName>KDL-48W600B</modelName>
<modelNumber>MINT1.7.0.1</modelNumber>
<UDN>uuid:00000000-0000-1010-8000-fcf152f5f8dd</UDN>
<dlna:X_DLNADOC xmlns:dlna="urn:schemas-dlna-org:device-1-0">DMR-1.50</dlna:X_DLNADOC>
<microsoft:magicPacketWakeSupported xmlns:microsoft="urn:schemas-microsoft-com:WMPNSS-1-0">1</microsoft:magicPacketWakeSupported>
<iconList>
<icon>
<mimetype>image/png</mimetype>
<width>32</width>
<height>32</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_32x32.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_48x48.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>60</width>
<height>60</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_60x60.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_120x120.png</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>32</width>
<height>32</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_32x32.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_48x48.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>60</width>
<height>60</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_60x60.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/MediaRenderer_HM_ME_120x120.jpg</url>
</icon>
</iconList>
<serviceList>
<service>
<serviceType>urn:schemas-upnp-org:service:RenderingControl:1</serviceType>
<serviceId>urn:upnp-org:serviceId:RenderingControl</serviceId>
<SCPDURL>/RenderingControlSCPD.xml</SCPDURL>
<controlURL>/upnp/control/RenderingControl</controlURL>
<eventSubURL>/upnp/event/RenderingControl</eventSubURL>
</service>
<service>
<serviceType>urn:schemas-upnp-org:service:ConnectionManager:1</serviceType>
<serviceId>urn:upnp-org:serviceId:ConnectionManager</serviceId>
<SCPDURL>/ConnectionManagerSCPD.xml</SCPDURL>
<controlURL>/upnp/control/ConnectionManager</controlURL>
<eventSubURL>/upnp/event/ConnectionManager</eventSubURL>
</service>
<service>
<serviceType>urn:schemas-upnp-org:service:AVTransport:1</serviceType>
<serviceId>urn:upnp-org:serviceId:AVTransport</serviceId>
<SCPDURL>/AVTransportSCPD.xml</SCPDURL>
<controlURL>/upnp/control/AVTransport</controlURL>
<eventSubURL>/upnp/event/AVTransport</eventSubURL>
</service>
<service>
<serviceType>urn:dial-multiscreen-org:service:dial:1</serviceType>
<serviceId>urn:dial-multiscreen-org:serviceId:dial</serviceId>
<SCPDURL>/DIALSCPD.xml</SCPDURL>
<controlURL>/upnp/control/DIAL</controlURL>
<eventSubURL />
</service>
<service>
<serviceType>urn:schemas-sony-com:service:IRCC:1</serviceType>
<serviceId>urn:schemas-sony-com:serviceId:IRCC</serviceId>
<SCPDURL>/IRCCSCPD.xml</SCPDURL>
<eventSubURL />
</service>
<service>
<serviceType>urn:schemas-sony-com:service:ScalarWebAPI:1</serviceType>
<serviceId>urn:schemas-sony-com:serviceId:ScalarWebAPI</serviceId>
<SCPDURL>/ScalarWebApiSCPD.xml</SCPDURL>
<controlURL>/upnp/control/ScalarAPI</controlURL>
<eventSubURL />
</service>
</serviceList>
<av:X_MaxBGMCount xmlns:av="urn:schemas-sony-com:av">64</av:X_MaxBGMCount>
<av:X_StandardDMR xmlns:av="urn:schemas-sony-com:av">1.1</av:X_StandardDMR>
<av:X_ScreenResolution xmlns:av="urn:schemas-sony-com:av">2K</av:X_ScreenResolution>
<av:X_IRCCCodeList xmlns:av="urn:schemas-sony-com:av">
<av:X_IRCCCode command="Power">AAAAAQAAAAEAAAAVAw==</av:X_IRCCCode>
<av:X_IRCCCode command="Power ON">AAAAAQAAAAEAAAAuAw==</av:X_IRCCCode>
<av:X_IRCCCode command="Power OFF">AAAAAQAAAAEAAAAvAw==</av:X_IRCCCode>
</av:X_IRCCCodeList>
<pnpx:X_compatibleId>MS_DigitalMediaDeviceClass_DMR_V001</pnpx:X_compatibleId>
<pnpx:X_deviceCategory>MediaDevices</pnpx:X_deviceCategory>
<pnpx:X_hardwareId>VEN_0106&DEV_0007&REV_01</pnpx:X_hardwareId>
<df:X_deviceCategory>Display.TV Multimedia.DMR</df:X_deviceCategory>
<av:X_TrackID_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
</av:X_TrackID_DeviceInfo>
<av:X_DIALEX_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
<av:X_DIALEX_DeviceID>B0:00:03:52:77:34</av:X_DIALEX_DeviceID>
<av:X_DIALEX_DeviceType>CoreTV_DIAL</av:X_DIALEX_DeviceType>
</av:X_DIALEX_DeviceInfo>
<av:X_ScalarWebAPI_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
<av:X_ScalarWebAPI_Version>1.0</av:X_ScalarWebAPI_Version>
<av:X_ScalarWebAPI_ServiceList>
<av:X_ScalarWebAPI_ServiceType>guide</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>system</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>videoScreen</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>audio</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>avContent</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>appControl</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>browser</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>notification</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>cec</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>accessControl</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>encryption</av:X_ScalarWebAPI_ServiceType>
</av:X_ScalarWebAPI_ServiceList>
</av:X_ScalarWebAPI_DeviceInfo>
<av:X_RDIS_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
<av:X_RDIS_Version>1.0</av:X_RDIS_Version>
<av:X_RDIS_SESSION_CONTROL>false</av:X_RDIS_SESSION_CONTROL>
<av:X_RDIS_ENTRY_PORT>20677</av:X_RDIS_ENTRY_PORT>
</av:X_RDIS_DeviceInfo>
</device>
</root>
&ssdp=HTTP/1.1 200 OK
CACHE-CONTROL: max-age=1800
EXT: 
SERVER: Linux/2.6 UPnP/1.0 KDL-48W600B/1.7
ST: upnp:rootdevice
USN: uuid:00000000-0000-1010-8000-fcf152f5f8dd::upnp:rootdevice
X-AV-Physical-Unit-Info: pa="BRAVIA KDL-48W600B";
X-AV-Server-Info: av=5.0; cn="Sony Corporation"; mn="BRAVIA KDL-48W600B"; mv="1.7";
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
 
The other BRAVIA return this to Magpie
 
<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<device>
<deviceType>urn:schemas-upnp-org:device:MediaRenderer:1</deviceType>
<friendlyName>BRvKDL32W650A bdrm</friendlyName>
<manufacturer>Sony Corporation</manufacturer>
<modelName>KDL-32W650A</modelName>
<modelNumber>MINT1.7.0.1</modelNumber>
<UDN>uuid:00000000-0000-1010-8000-d8d43c8fe38f</UDN>
<dlna:X_DLNADOC xmlns:dlna="urn:schemas-dlna-org:device-1-0">DMR-1.50</dlna:X_DLNADOC>
<microsoft:magicPacketWakeSupported xmlns:microsoft="urn:schemas-microsoft-com:WMPNSS-1-0">1</microsoft:magicPacketWakeSupported>
<iconList>
<icon>
<mimetype>image/png</mimetype>
<width>32</width>
<height>32</height>
<depth>24</depth>
<url>/MediaRenderer_LW_32x32.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/MediaRenderer_LW_48x48.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>60</width>
<height>60</height>
<depth>24</depth>
<url>/MediaRenderer_LW_60x60.png</url>
</icon>
<icon>
<mimetype>image/png</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/MediaRenderer_LW_120x120.png</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>32</width>
<height>32</height>
<depth>24</depth>
<url>/MediaRenderer_LW_32x32.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>48</width>
<height>48</height>
<depth>24</depth>
<url>/MediaRenderer_LW_48x48.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>60</width>
<height>60</height>
<depth>24</depth>
<url>/MediaRenderer_LW_60x60.jpg</url>
</icon>
<icon>
<mimetype>image/jpeg</mimetype>
<width>120</width>
<height>120</height>
<depth>24</depth>
<url>/MediaRenderer_LW_120x120.jpg</url>
</icon>
</iconList>
<serviceList>
<service>
<serviceType>urn:schemas-upnp-org:service:RenderingControl:1</serviceType>
<serviceId>urn:upnp-org:serviceId:RenderingControl</serviceId>
<SCPDURL>/RenderingControlSCPD.xml</SCPDURL>
<controlURL>/upnp/control/RenderingControl</controlURL>
<eventSubURL>/upnp/event/RenderingControl</eventSubURL>
</service>
<service>
<serviceType>urn:schemas-upnp-org:service:ConnectionManager:1</serviceType>
<serviceId>urn:upnp-org:serviceId:ConnectionManager</serviceId>
<SCPDURL>/ConnectionManagerSCPD.xml</SCPDURL>
<controlURL>/upnp/control/ConnectionManager</controlURL>
<eventSubURL>/upnp/event/ConnectionManager</eventSubURL>
</service>
<service>
<serviceType>urn:schemas-upnp-org:service:AVTransport:1</serviceType>
<serviceId>urn:upnp-org:serviceId:AVTransport</serviceId>
<SCPDURL>/AVTransportSCPD.xml</SCPDURL>
<controlURL>/upnp/control/AVTransport</controlURL>
<eventSubURL>/upnp/event/AVTransport</eventSubURL>
</service>
<service>
<serviceType>urn:dial-multiscreen-org:service:dial:1</serviceType>
<serviceId>urn:dial-multiscreen-org:serviceId:dial</serviceId>
<SCPDURL>/DIALSCPD.xml</SCPDURL>
<controlURL>/upnp/control/DIAL</controlURL>
<eventSubURL />
</service>
<service>
<serviceType>urn:schemas-sony-com:service:IRCC:1</serviceType>
<serviceId>urn:schemas-sony-com:serviceId:IRCC</serviceId>
<SCPDURL>/IRCCSCPD.xml</SCPDURL>
<eventSubURL />
</service>
<service>
<serviceType>urn:schemas-sony-com:service:ScalarWebAPI:1</serviceType>
<serviceId>urn:schemas-sony-com:serviceId:ScalarWebAPI</serviceId>
<SCPDURL>/ScalarWebApiSCPD.xml</SCPDURL>
<controlURL>/upnp/control/ScalarAPI</controlURL>
<eventSubURL />
</service>
</serviceList>
<av:X_MaxBGMCount xmlns:av="urn:schemas-sony-com:av">64</av:X_MaxBGMCount>
<av:X_StandardDMR xmlns:av="urn:schemas-sony-com:av">1.1</av:X_StandardDMR>
<av:X_ScreenResolution xmlns:av="urn:schemas-sony-com:av">2K</av:X_ScreenResolution>
<av:X_IRCCCodeList xmlns:av="urn:schemas-sony-com:av">
<av:X_IRCCCode command="Power">AAAAAQAAAAEAAAAVAw==</av:X_IRCCCode>
<av:X_IRCCCode command="Power ON">AAAAAQAAAAEAAAAuAw==</av:X_IRCCCode>
<av:X_IRCCCode command="Power OFF">AAAAAQAAAAEAAAAvAw==</av:X_IRCCCode>
</av:X_IRCCCodeList>
<pnpx:X_compatibleId>MS_DigitalMediaDeviceClass_DMR_V001</pnpx:X_compatibleId>
<pnpx:X_deviceCategory>MediaDevices</pnpx:X_deviceCategory>
<pnpx:X_hardwareId>VEN_0106&DEV_0006&REV_01</pnpx:X_hardwareId>
<df:X_deviceCategory>Display.TV Multimedia.DMR</df:X_deviceCategory>
<av:X_TrackID_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
</av:X_TrackID_DeviceInfo>
<av:X_ScalarWebAPI_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
<av:X_ScalarWebAPI_Version>1.0</av:X_ScalarWebAPI_Version>
<av:X_ScalarWebAPI_ServiceList>
<av:X_ScalarWebAPI_ServiceType>guide</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>system</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>videoScreen</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>audio</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>avContent</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>appControl</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>browser</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>notification</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>cec</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>accessControl</av:X_ScalarWebAPI_ServiceType>
<av:X_ScalarWebAPI_ServiceType>irCommandProxy</av:X_ScalarWebAPI_ServiceType>
</av:X_ScalarWebAPI_ServiceList>
</av:X_ScalarWebAPI_DeviceInfo>
<av:X_RDIS_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
<av:X_RDIS_Version>1.0</av:X_RDIS_Version>
<av:X_RDIS_SESSION_CONTROL>false</av:X_RDIS_SESSION_CONTROL>
<av:X_RDIS_ENTRY_PORT>20677</av:X_RDIS_ENTRY_PORT>
</av:X_RDIS_DeviceInfo>
<av:X_DIALEX_DeviceInfo xmlns:av="urn:schemas-sony-com:av">
</av:X_DIALEX_DeviceInfo>
</device>
</root>
&ssdp=NOTIFY * HTTP/1.1
HOST: 239.255.255.250:1900
CACHE-CONTROL: max-age=1800
NT: upnp:rootdevice
NTS: ssdp:alive
SERVER: Linux/2.6 UPnP/1.0 KDL-32W650A/1.7
USN: uuid:00000000-0000-1010-8000-d8d43c8fe38f::upnp:rootdevice
X-AV-Physical-Unit-Info: pa="BRAVIA KDL-32W650A";
X-AV-Server-Info: av=5.0; cn="Sony Corporation"; mn="BRAVIA KDL-32W650A"; mv="1.7";
 
 
I don't see any meaningful differences, do you?
Pazium Newbie

Pazium

Posted
Posted

ok

I used CHROME POSTMAN

put in the headers and the content andsent it

got this response, a 606 error

<s:Envelope 
    <s:Body>
        <s:Fault>
            <faultcode>s:Client</faultcode>
            <faultstring>UPnPError</faultstring>
            <detail>
                <UPnPError 
                    xmlns="urn:schemas-upnp-org:control-1-0">
                    <errorCode>606</errorCode>
                    <errorDescription>Action not authorized</errorDescription>
                </UPnPError>
            </detail>
        </s:Fault>
    </s:Body>
</s:Envelope>
Pazium Newbie

Pazium

Posted
Posted

No. but I read about this header thing in a couple of places

X-CERS-DEVICE-ID

 

How do I add this to the list of headers in ISY?

Pazium Newbie

Pazium

Posted
Posted

did this and still got the 500 error in isy

POST /sony/IRCC/ HTTP/1.1
Host: 192.168.1.16:80
User-Agent: TVSideView/2.0.1 CFNetwork/672.0.8 Darwin/14.0.0'
SOAPACTION: urn:schemas-sony-com:service:IRCC:1#X_SendIRCC
Content-Length: 316
X-CERS-DEVICE-INFO: Pazz Remote
X-CERS-DEVICE-ID: 11-38-11-38-11-38
Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8
Accept-Encoding: gzip, deflate
 
<?xml version="1.0"?>
  <s:Body>
    <u:X_SendIRCC xmlns:u="urn:schemas-sony-com:service:IRCC:1">
      <IRCCCode>AAAAAQAAAAEAAAAvAw==</IRCCCode>
    </u:X_SendIRCC>
  </s:Body>
</s:Envelope>
Guest
This topic is now closed to further replies.
Go to topic listing
×
×
  • Create New...