Daveg01 Posted October 26, 2013 Share Posted October 26, 2013 Installed my first Switchlinc Dimmer, and linked it. I can turn the lights on and off but I want to ramp it to a set level. I tried adding the dimmer to a scene. When I test the scene it fails. I have tried with the switch as a responder and as a controller. If I select the switch from in the scene I can control it, but if I click on the scene itself and hit on/off I get nothing. I tried adding "adjust scene" to a program and set to 50% on, then ran the "if" statement but no go. Any help on how to get a program to ramp up to say 50% would be great. Dave Link to comment Share on other sites More sharing options...
Michel Kohanim Posted October 27, 2013 Share Posted October 27, 2013 Hi Dave, Exactly in what scenario do you want the switch to ramp? When you activate it locally? When activated from another switch? When activated from ISY? I strongly recommend reviewing Scene Basics article here: http://wiki.universal-devices.com/index ... ide#Scenes With kind regards, Michel Link to comment Share on other sites More sharing options...
LeeG Posted October 27, 2013 Share Posted October 27, 2013 Michel This is a duplicate post. User was running 3.2.6 on a 99i trying to process an I2CS device. He loaded 3.3.10 on the ISY but has not gotten the UI to 3.3.10 yet. Once that is accomplished I asked him to delete the device and add it back under 3.3.10. Link to comment Share on other sites More sharing options...
Michel Kohanim Posted October 27, 2013 Share Posted October 27, 2013 Hi LeeG, As always, thanks so very much for your untiring help and support. I do very much appreciate it. With kind regards, Michel Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.