south Posted November 10, 2013 Posted November 10, 2013 How do you get this to beep? Smarthome says it software configable, does the ISY 994 support this?
oberkc Posted November 11, 2013 Posted November 11, 2013 I am able to make some of my modules beep with the ISY-994. I don't have any dual-band lamplincs, but I cannot imagine why they would not be so capable.
LeeG Posted November 11, 2013 Posted November 11, 2013 A working example of a Program the uses the Beep capability of a Dual Band LampLinc If Control 'MotionSensor2-Sensor' is switched On Then Repeat 5 times Set 'LampLinc DB' 100 (Beep Duration) Else - No Actions - (To add one, press 'Action') Note that none of the existing devices support the duration aspects of the Beep command. Some day SmartLabs may release a device that honors "duration" but for now the duration of the Beep is fixed by the device itself.
south Posted November 11, 2013 Author Posted November 11, 2013 Thanks, tried your program, but no beep. It needs to be enabled some way. I do not know how to do that.
LeeG Posted November 11, 2013 Posted November 11, 2013 It should not have to be enabled. The ISY does not have a UI (Admin Console) option to Enable/Disable the Beep function on a LampLinc. My Dual Band LampLinc that beeps has firmware v.3B. What level firmware is in the LampLinc?
south Posted November 11, 2013 Author Posted November 11, 2013 My lamplinc is (B2457D2) Lamplinc BiPhy v.41
Recommended Posts