viper Posted November 13, 2013 Posted November 13, 2013 I have a Cisco EA6500 router that I have in Bridge Mode to act as an access point. Based on what I've figured out, the EA6500 is attempting to talk to the 994i each minute about HNAP (Home Network Administration Protocol). I've attempted to shutdown the requests by configuring the EA6500 for https access, but unfortunately, it seems I'm unable to disable the http access, which from what I've read, should have disabled the HNAP polling. So, my error log is growing at a tremendous rate. Here is a sample of the error log: Tue 2013/11/12 10:44:16 AM System -170001 [HTTP] 192.168.1.20:36574->80 Tue 2013/11/12 10:44:16 AM System -170001 [HTTP]: GET-->/desc Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] 192.168.1.20:57405->80 Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] 192.168.1.20:51058->80 Tue 2013/11/12 10:44:18 AM System -170001 [HTTP]: GET-->/HNAP1/ Tue 2013/11/12 10:44:18 AM System -170001 [HTTP]: GET-->/ Tue 2013/11/12 10:44:18 AM System -170001 UDWriteAll[sock=33]:Socket inactive Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] Socket not active#2 Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] Closing socket w/failure Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] 192.168.1.20:49679->80 Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] Socket not active#1 Tue 2013/11/12 10:44:18 AM System -170001 [HTTP] Closing socket w/failure Tue 2013/11/12 10:45:06 AM System -170001 [HTTP] 192.168.1.20:59322->80 Tue 2013/11/12 10:45:06 AM System -170001 [HTTP]: GET-->/desc Tue 2013/11/12 10:45:18 AM System -170001 [HTTP] 192.168.1.20:42966->80 Tue 2013/11/12 10:45:18 AM System -170001 [HTTP] 192.168.1.20:33021->80 Tue 2013/11/12 10:45:18 AM System -170001 [HTTP]: GET-->/HNAP1/ Tue 2013/11/12 10:45:18 AM System -170001 [HTTP]: GET-->/ Tue 2013/11/12 10:45:18 AM System -170001 [HTTP] 192.168.1.20:43316->80 Tue 2013/11/12 10:45:18 AM System -170001 [Auth] 192.168.1.20:43316->80, Num=3 Tue 2013/11/12 10:46:18 AM System -170001 [HTTP] 192.168.1.20:36291->80 Tue 2013/11/12 10:46:18 AM System -170001 [HTTP]: GET-->/HNAP1/ Tue 2013/11/12 10:46:18 AM System -170001 [HTTP] 192.168.1.20:45401->80 Tue 2013/11/12 10:46:18 AM System -170001 [HTTP]: GET-->/ Tue 2013/11/12 10:46:18 AM System -170001 [HTTP] 192.168.1.20:51334->80 With diagnostics off, I'm getting tons of "Auth:-10104" errors. Is there anything I can do on the 994i side to stop the polling? Does anyone know how to turn off the polling from the EA6500 side? Thanks! Tom
Michel Kohanim Posted November 14, 2013 Posted November 14, 2013 Hi viper, I am so very sorry to hear. This does not look good. I tried finding a user guide or anything useful alas - and apart from turn off directory browsing - I could not find anything. As far as ISY is concerned, we really cannot do anything above and beyond logging the attempt. I am so very sorry. With kind regards, Michel
Recommended Posts