modex Posted January 9, 2014 Share Posted January 9, 2014 fyi: I am VERY new to the isy When I open device manager I see three columns. my devices, my scenes, my folders. when i click the configurations icon, nothing happens. What am I doing wrong. Devices I expected to have conectability: FIOS box connected to global cache. PS3 connected to modem via ethernet Logitech Harmony Hub Link to comment
Michel Kohanim Posted January 9, 2014 Share Posted January 9, 2014 Hi modex, I am so very sorry to hear. Can you please let me know what URL you are using? If you have not yet registered any devices, nothing will show up. With kind regards, Michel Link to comment
modex Posted January 9, 2014 Author Share Posted January 9, 2014 Michel, I registered the isy994izs/ir at your direction. I am using url http://192.168.1.111, based on the static ip i set. Link to comment
Michel Kohanim Posted January 10, 2014 Share Posted January 10, 2014 Hi modex, I am so very sorry to hear. I just got your ticket as well. I am not sure what's device manager (except in the context of the dashboard). Please: 1. Use http://isy.universal-devices.com/994i/4.1.1/admin.jnlp 2. Go to Tool | Diagnostics | PLM Info/Status and let me know what you see With kind regards, Michel Link to comment
modex Posted January 11, 2014 Author Share Posted January 11, 2014 This is what happened when i did a diagnostic on the PLM Link to comment
Michel Kohanim Posted January 12, 2014 Share Posted January 12, 2014 Hi modex, Thank you. What do you get when you go to Link Management | Start Linking? If you get the Linking in Progress dialog, can you not register your devices? With kind regards, Michel Link to comment
modex Posted January 12, 2014 Author Share Posted January 12, 2014 When I go into Link management then Start Linking, nothing happens. no error message. nothing. is there something i have to do on the control end? i thought that since my ps3 (via ethernet) and my tv & Fios box (via the gc100) were connected to the network that they would show up automatically. Am i missing a step? Link to comment
LeeG Posted January 12, 2014 Share Posted January 12, 2014 The ISY does not list devices on the local LAN. Also when Start Linking is clicked a popup window should display. The lack of the popup window could indicate an issue with the AV being used. What AV is in use? Link to comment
apostolakisl Posted January 12, 2014 Share Posted January 12, 2014 global cache, ps3, harmony, and fios don't link to ISY. You can send commands to a global cache using the network module, and harmony can send IR commands to ISY (if you have the ISY IR model). Link to comment
modex Posted January 12, 2014 Author Share Posted January 12, 2014 is there a link that explains how to go through the global cache to harmony…or can you outline how to do that. Link to comment
apostolakisl Posted January 12, 2014 Share Posted January 12, 2014 is there a link that explains how to go through the global cache to harmony…or can you outline how to do that. What Harmony do you have? I do believe some of the new ones have network accessibility. Anyway, you need the ISY network module to send any network commands to anything. I know for a fact that you can send network commands from ISY to GC units as I have one of the wf2ir models. I have a harmony 890, but it has no network accessibility. Link to comment
Michel Kohanim Posted January 13, 2014 Share Posted January 13, 2014 Hi modex, I do not think you have purchased the correct unit. ISY is an INSTEON/X10/Zigbee (and lately Z-Wave) controller. You can use network resources to communicate with devices on the network. This said, the focus is INSTEON and Z-Wave. Do you have a PLM attached to ISY? If so, can you tell me what you get when you go to Tools | Diagnostics | PLM Info/Status? With kind regards, Michel Link to comment
Recommended Posts
Archived
This topic is now archived and is closed to further replies.