shannong Posted March 2, 2014 Posted March 2, 2014 My ISY only lists Output zones starting at 65. The onboard Output Zone 3 is a contact closure I want to use from ISY. When it's active, it becomes populated in ISY for the Outputs of the Elk tab. When it turns off, it reflects that status. However, whenever a fresh connection is made to ISY it doesn't reappear. Also, I cannot select it in programs even when it is showing in the Elk tab. Anyway to make it stay so I can trigger Output Zone 3 and build notifications?
apostolakisl Posted March 2, 2014 Posted March 2, 2014 I'll tell you that my ISY lists all outputs (1-208, except 2) without having done any special configuration. And they are also there for me to use in programs.
shannong Posted March 2, 2014 Author Posted March 2, 2014 Well, that was easy. You need to check the "Show" column in RP2. Knowing it should work was all the motivation I needed to poke around more. Thanks for the info.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.