2486D LEDs

[Princerichy]

I have an older 2486 KeypadLinc, 6 button. I cannot get the A - D LEDs to light via the ISY994i. Any Suggestion? I just purchased the ISY994i and so far it is great! Thanks for your help.

[Michel Kohanim]

Hi Princerichy,

 

You need to put those buttons inside a scene (as responder) and then activate the scene.

 

With kind regards,

Michel

[Princerichy]

Hi Michael, I have them in various programs but not scenes.

 

This is an example:

If From Sunset -30 minutes

To 11:14PM (same day)

 

Then Set Family Room Lamp On

Set Master Bathroom - C on 15 / off 0 (backlight level)

 

Else No Actions

 

Master Bathroom C in a 6 button KeypadLinc

 

The Family Room lamp operates as requested but the KeyPadLinc does not

 

Thank you for your patience!

[Xathros]

Princerichy-

 

As Michel said above, secondary KPL buttons need to be placed in a scene and the scene used to turn them On/Off. Setting the backlight level (usually done on the primary node) affects the On and Off brightness levels for ALL buttons of the KPL. It does not turn on/off individual buttons - only sets the KPL's 2 brightness levels globally.

 

-Xathros

[Princerichy]

I will set it up properly. Thank you for the enlightenment!