Princerichy Posted May 28, 2014 Posted May 28, 2014 I have an older 2486 KeypadLinc, 6 button. I cannot get the A - D LEDs to light via the ISY994i. Any Suggestion? I just purchased the ISY994i and so far it is great! Thanks for your help.
Michel Kohanim Posted May 28, 2014 Posted May 28, 2014 Hi Princerichy, You need to put those buttons inside a scene (as responder) and then activate the scene. With kind regards, Michel
Princerichy Posted May 28, 2014 Author Posted May 28, 2014 Hi Michael, I have them in various programs but not scenes. This is an example: If From Sunset -30 minutes To 11:14PM (same day) Then Set Family Room Lamp On Set Master Bathroom - C on 15 / off 0 (backlight level) Else No Actions Master Bathroom C in a 6 button KeypadLinc The Family Room lamp operates as requested but the KeyPadLinc does not Thank you for your patience!
Xathros Posted May 28, 2014 Posted May 28, 2014 Princerichy- As Michel said above, secondary KPL buttons need to be placed in a scene and the scene used to turn them On/Off. Setting the backlight level (usually done on the primary node) affects the On and Off brightness levels for ALL buttons of the KPL. It does not turn on/off individual buttons - only sets the KPL's 2 brightness levels globally. -Xathros
Princerichy Posted May 28, 2014 Author Posted May 28, 2014 I will set it up properly. Thank you for the enlightenment!
Recommended Posts