gmurch Posted July 14, 2014 Posted July 14, 2014 Hi I replaced a kpl today and seemed to have issues so I reset it (air gap, etc). Now I want to remove it from the isy and start over again. I can't seem to delete/remove it, any suggestions?
LeeG Posted July 14, 2014 Posted July 14, 2014 Make sure the device is not in a Folder before selecting Delete of Primary KPL button.
gmurch Posted July 14, 2014 Author Posted July 14, 2014 It's just in "my lighting" but delete doesn't seem to work?
gmurch Posted July 14, 2014 Author Posted July 14, 2014 If I can delete it, re-discover it and the ad it as a controller to existing scenes I can accomplish what I want easily
LeeG Posted July 14, 2014 Posted July 14, 2014 I do not have a 4.0.5, looks like it was called Remove back then. What happens when Remove is selected?
gmurch Posted July 14, 2014 Author Posted July 14, 2014 Nothing. Isn't 4.0.5 the current release? This is a new isy that replaced my old isy 26
Brian H Posted July 14, 2014 Posted July 14, 2014 4.0.5 is the latest Official Release. 4.2.5 Is the latest Release Candidate. I would expect a later Official Release would be close.
Xathros Posted July 14, 2014 Posted July 14, 2014 (edited) Select delete from the Primary node of the KPL not one of the sub nodes. -Xathros Edited July 14, 2014 by Xathros
LeeG Posted July 14, 2014 Posted July 14, 2014 (edited) I noticed from the posted image the KPL buttons are not Grouped. This means the buttons are displayed in alpha order rather than the Primary button being first. Right click on KPL button and select Group Devices. That will place the Primary node first. Edited July 14, 2014 by LeeG
gmurch Posted July 15, 2014 Author Posted July 15, 2014 I have a feeling this may be my problem. Behind the admin window I see this window and it is looking for a URL?
Brian H Posted July 15, 2014 Posted July 15, 2014 That is the "ISY Finder" and is normal for it to be open and behind the admin window.
LeeG Posted July 15, 2014 Posted July 15, 2014 I noticed from the posted image the KPL buttons are not Grouped. This means the buttons are displayed in alpha order rather than the Primary button being first. Right click on any KPL button and select Group Devices. That will place the Primary node first, the only node that reacts to the Delete/Remove function. There is an Ungroup function if the KPL buttons are preferred in alpha order when the KPL is added back.
gmurch Posted July 16, 2014 Author Posted July 16, 2014 (edited) I don't know if this is any help but the "current state" of my devices do not display. All timers, triggers, etc work so the ISY is functioningThe last time this happened the admin console was looking for a device and needed me to add it. The problem was the the request was displayed behind the admin console and I didn't see it, as soon as I clicked on "add" the problem went away. That is why I posted the image in post 15. Here is what is displayed in "about" Here is a pic of the admin window with no "current state" displayed. Edited July 16, 2014 by gmurch
LeeG Posted July 16, 2014 Posted July 16, 2014 The Admin Console is not 4.0.5. Clear the Java cache including the Applications. Use the URL from page 1 of the 4.0.5 announcement to invoke the Admin Console.
Michel Kohanim Posted July 16, 2014 Posted July 16, 2014 Hello gmurch, Would you please contact our tech support? With kind regards, Michel
gmurch Posted July 16, 2014 Author Posted July 16, 2014 I hope we can figure this out? I have no access to my devices through the admin console. I can, however, turn on and off all of my scenes from the console. The triggers, timers and links all work properly from the switches but the "current state" doesn't show and I can't query or do anything with the individual devices through the console?
Michel Kohanim Posted July 16, 2014 Posted July 16, 2014 Hi gmurch, please contact our tech support. With kind regards, Michel
LeeG Posted July 16, 2014 Posted July 16, 2014 gmurch The Admin Console looks old. A version which does not have a UI line. Even 3.3.10 has a UI line. Also the lack of events is another issue. UDI tech support will work with you to get the environment back to the needed level.
Recommended Posts