Can someone help me with the command structure(syntax) for issuing an RS232 command via the ISY.  I already have the ISY994i with the networking module installed and I know how to create the resource but not so sure what to use to execute the command (http, tcp, etc).  Any help would be appreciated.

 

The device that I am trying to control is my Key Digital Matrix Switch.  When I set up the GC IP2SL  the manufacturer suggests that the following settings be applied: 

 

» Baud rate: 57,600

» Data Bits: 8

» Parity: None

» Stop Bits: 1

» Flow Control: None

» Carriage Return: Required

» Line Feed: Required

 

The command that I would like to use to create an ISY resource for will switch Output 3 to Input 1.  The command that I should use is SPO01SI03.  How do I write this command in the isy resource?

 

 

 

 

Hi ldrinc,

 

You must use TCP. This said, Have you verified that you can communicate with your switch through IP2SL?

 

With kind regards,

Michel

Here's an example from my setup.

 

sendir,1:1,1,38000,1,1,342,171,21,21,21,64,21,64,21,21,21,21,21,21,21,21,21,21,21,64,21,21,21,21,21,64,21,64,21,64,21,64,21,64,21,64,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,21,64,21,64,21,64,21,64,21,64,21,64,21,64,21,1518,342,86,21,3655\r\n

 

Heck if I can remember what this means or how I came up with this! Mode is C-Escaped.

 

This switches an SR-22 A/B speaker switch an IP2IR.

 

OK, this is an IR command, which is why it is so long and painful. You've got it easy! You probably just want URL-encoded.

Edited April 27, 201510 yr by jtara92101