gregseigs1 Posted September 24, 2015 Posted September 24, 2015 I'm assuming this is to operate the system remotely. How do I set this up via a static ID via noip.com?
larryllix Posted September 24, 2015 Posted September 24, 2015 What are you assuming is for remote access and where are you finding this option? For no-ip you need an account with the service and you need a no-ip client running on a 24x7 PC or a router that supports this. Somebody has to send your IP address on a timed basis to no-ip so they know what IP you have been issued by your ISP. No-IP will issue you a URL like this. www.gregseigs1.noip.com that you will use that will echo your data to your router.
gregseigs1 Posted September 24, 2015 Author Posted September 24, 2015 If I am in the Ekeypad app (I am using an iPhone), under the config tab, then under advanced settings, there is a button for "Enable Integration". When checked, I entered my ddns address, 2601 for the port, my server name and password. Will not work after that. What am I doing wrong here?
larryllix Posted September 24, 2015 Posted September 24, 2015 If I am in the Ekeypad app (I am using an iPhone), under the config tab, then under advanced settings, there is a button for "Enable Integration". When checked, I entered my ddns address, 2601 for the port, my server name and password. Will not work after that. What am I doing wrong here? Sorry. I am not an iStuff person.
wfitzner Posted November 10, 2015 Posted November 10, 2015 I'm having the same problem. I've tried port number 86 which I select on my ISY, port number 443 and port number 2601. I get the message The remote management server can not be contacted. I'm not new to this but can't get this feature to work.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.