Dinboise Posted December 10, 2015 Posted December 10, 2015 Purchased both a door sensor and chime (Insteon from Smarthome). The Door sensor was linked using the manual way. The chime however refuses. I upgraded the ISY to the 4.3.26 version and cleared the cache. I uploaded the new version of the admin consul for good measure. After reading other posts about this I went ahead and ran an error report but I was given an error message. It just said it failed. Could someone tell me how I can run a level 3 error report. I think this is the next step to get you guys to fix this issue with the Smarthome guys right? Thanks David
larryllix Posted December 10, 2015 Posted December 10, 2015 Purchased both a door sensor and chime (Insteon from Smarthome). The Door sensor was linked using the manual way. The chime however refuses. I upgraded the ISY to the 4.3.26 version and cleared the cache. I uploaded the new version of the admin consul for good measure. After reading other posts about this I went ahead and ran an error report but I was given an error message. It just said it failed. Could someone tell me how I can run a level 3 error report. I think this is the next step to get you guys to fix this issue with the Smarthome guys right? Thanks David Since the chime is a brand new product ISY will not have it in it's database for proper operation. You will have to wait for a future IS version release. I recommend you search for Request new features and voice in that thread. UDI listens.
Michel Kohanim Posted December 10, 2015 Posted December 10, 2015 Hello everyone, We have been in contact with SmartHome and it seems that they don't have the APIs available nor do they know when it would become available. With kind regards, Michel
mwester Posted December 10, 2015 Posted December 10, 2015 Perhaps I'm missing something here... SmartHome/Insteon makes the device, but they don't know how it works? (I wonder if their hubs also don't support this thing... that'll make a lot of annoyed purchasers!!) Edited: Sorry, I didn't read carefully enough -- they're not saying that they don't know the API, they're saying that they don't know when they'll be able to share the API with UDI. I'm not sure that's better -- but at least it absolves SmartHome of gross ignorance!
Michel Kohanim Posted December 10, 2015 Posted December 10, 2015 mwester, The last paragraph is correct. With kind regards, Michel
Dinboise Posted December 11, 2015 Author Posted December 11, 2015 Michel - because you have been in contact with Smarthome, does that mean I don't have to ask the UDI folks in the forum as Larryllix suggests? Thanks for keeping up with the new products - I did not realize the effort that goes into maintaining the ISY functionality. The ability to build creative programs for my instead products has been very rewarding. I got news I was to somehow monitor the front door in case my son tries to exit the home (he sleepwalks and has walked out of the home before, yikes). While this is not good news, I was glad to be able to quickly link a sensor to a few lights and an old X10 power horn on dim for a not so obnoxious alarm. So much better than one of the high decibel door alarms on the market. Anyway TMI - thanks for the good work you do. David
Michel Kohanim Posted December 11, 2015 Posted December 11, 2015 Hi David, Thank YOU and I am so very glad to hear that ISY has been productive for you and your loved ones. Yes, we are in contact with SmartHome and they have promised to get this to us ASAP. With kind regards, Michel
robl Posted April 21, 2016 Posted April 21, 2016 Thanks for the info! Unfortunately, almost half a year has gone by. I just got one of these modules and the latest isy update (4.4.6) and it is still not supported. Rats! Does anyone have any updated news?
Brian H Posted April 21, 2016 Posted April 21, 2016 You may want to search one of the other Alert Module threads. Michel said they did not receive the API but where send some communications logs they maybe able to get information from. Hoping to eventually get support into one of the 5.xx firmware releases. I got two of Alert Modules in late December 2015 and I am still waiting for Smarthome to get the needed date to UDI. I place total blame of this no support on Smartlabs. As I know UDI is trying to get the API as soon as possible.
firetruk11 Posted September 7, 2016 Posted September 7, 2016 You may want to search one of the other Alert Module threads. Michel said they did not receive the API but where send some communications logs they maybe able to get information from. Hoping to eventually get support into one of the 5.xx firmware releases. I got two of Alert Modules in late December 2015 and I am still waiting for Smarthome to get the needed date to UDI. I place total blame of this no support on Smartlabs. As I know UDI is trying to get the API as soon as possible. So where are we (ie Smartlabs) with this.... any new information
Brian H Posted September 7, 2016 Posted September 7, 2016 (edited) From what I have seen in other threads. I understand that some data was received. Looks like it will be in the 5.? firmware. Edited September 7, 2016 by Brian H
Michel Kohanim Posted September 7, 2016 Posted September 7, 2016 Hello everyone, It will be in the next 5.0.5 release. With kind regards, Michel
Recommended Posts