Jump to content
View in the app

A better way to browse. Learn more.
Universal Devices Forum

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

EZFlora Model #5010A ISY UnSupported

Automate the World
in ISY994

Featured Replies

Posted

Just got from Smarthome and wanted to replace an EZflora that gave up after 5 years of service and when i try to link it say unsupported....

 

22333-233

V 1.C

1057


PS. I am on 4.3.26

Just got from Smarthome and wanted to replace an EZflora that gave up after 5 years of service and when i try to link it say unsupported....

 

22333-233

V 1.C

1057

PS. I am on 4.3.26

 

Did you try New Insteon Device and manually selecting the ezflora? If you scroll down the list of devices, the ezflora is 4.00

 

Paul

  • Author

Did you try New Insteon Device and manually selecting the ezflora? If you scroll down the list of devices, the ezflora is 4.00

 

Paul

Thanks for the pointer Paul! Manually selecting EZFlora did add it into the system as such but for some reason only added 5 of the 8 zones. Any idea why that would be?

Wierd. No reason I can think of. Ideas at this point:

  1. Close, then re-run the admin console ..or..
  2. Unplug and replug in the ezflora .. if that doesn't work...
  3. repeat step 2, delete the ezflora and add it back in again

Guessing a bit at this point

 

Paul

Try right click on EZFlora node and select Group Devices.  You may have all,eight nodes but they are not listed together without being 'grouped' together.

  • Author

Wierd. No reason I can think of. Ideas at this point:

  1. Close, then re-run the admin console ..or..
  2. Unplug and replug in the ezflora .. if that doesn't work...
  3. repeat step 2, delete the ezflora and add it back in again

Guessing a bit at this point

 

Paul

Thanks again Paul. Gave those steps a try and same result. Have a wonderful weekend.

Try right click on EZFlora node and select Group Devices.  You may have all,eight nodes but they are not listed together without being 'grouped' together.

 

Thanks Lee, but that didn't make a difference.

  • Author

One last suggestion, it may be the ezflora itself. Factory reset the ezflora. I don't know the steps, but the manual in the box should have it.

 

Paul

Negative ghost rider. Thanks again.

Thanks for the pointer Paul! Manually selecting EZFlora did add it into the system as such but for some reason only added 5 of the 8 zones. Any idea why that would be?

 

Curious... what does Help > About show for Firmware and UI?

 

 

Jon...

After uninstalling and factory reset you might open Event Viewer to level 3 and copy linking events then post back trace.  I've developed a habit with new devices to link from the same outlet as my PLM.  I have extension cord I've parted the outlet end from and use that for wired devices and a short adapter I use for wall warts.

 

 

Jon...

  • Author

After uninstalling and factory reset you might open Event Viewer to level 3 and copy linking events then post back trace.  I've developed a habit with new devices to link from the same outlet as my PLM.  I have extension cord I've parted the outlet end from and use that for wired devices and a short adapter I use for wall warts.

 

 

Jon...

Finally had a chance to look at the issue again. Removed the EZFlora, rebooted and then added with a level 3 trace;

 

Tue 02/09/2016 04:09:24 PM : Start Insteon Device Linking Mode

Tue 02/09/2016 04:09:24 PM : [LNK-BGN     ] 02 64 01 00 06

Tue 02/09/2016 04:09:32 PM : [LNK-STAT    ] 02 53 M(01) gid=00 38.7C.3B 0400 28

Tue 02/09/2016 04:09:32 PM : [38.7C.3B 00] Linked device type=04.00 fw=28

Tue 02/09/2016 04:09:32 PM : [38 7C 3B 0  ] Added to list of devices to link to ISY

Tue 02/09/2016 04:09:32 PM : [LNK-BGN     ] 02 64 01 00 06

Tue 02/09/2016 04:09:33 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:09:34 PM : CLI-HAMW: Successfully Processed HAMW Response

Tue 02/09/2016 04:09:34 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:09:34 PM : CLI-HAMW: Successfully Processed HAMW Response

Tue 02/09/2016 04:09:34 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:09:34 PM : CLI-HAMW: Successfully Processed HAMW Response

Tue 02/09/2016 04:09:48 PM : Stop Insteon Device Linking Mode, Final processing to follow

Tue 02/09/2016 04:09:48 PM : [LNK-END     ] 02 65 06 : : Unexpected, ignored (65)

Tue 02/09/2016 04:09:48 PM : [iNST-TX-I1  ] 02 62 38 7C 3B 0F 0D 00

Tue 02/09/2016 04:09:48 PM : [iNST-ACK    ] 02 62 38.7C.3B 0F 0D 00 06                 (00)

Tue 02/09/2016 04:09:49 PM : [iNST-SRX    ] 02 50 38.7C.3B 33.5D.61 2F 0D 02           (02)

Tue 02/09/2016 04:09:49 PM : [std-Direct Ack] 38.7C.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=3

Tue 02/09/2016 04:09:49 PM : [38 7C 3B 0  ] Calibrating engine version

Tue 02/09/2016 04:09:49 PM : [iNST-TX-I2CS] 02 62 38 7C 3B 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0

Tue 02/09/2016 04:09:49 PM : [iNST-ACK    ] 02 62 38.7C.3B 1F 2F 00 00 00 00 00 01 00 00 00 00 00 00 00 00 D0 06        (00)

Tue 02/09/2016 04:09:49 PM : [iNST-SRX    ] 02 50 38.7C.3B 33.5D.61 2F 2F 00           (00)

Tue 02/09/2016 04:09:49 PM : [std-Direct Ack] 38.7C.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=3

Tue 02/09/2016 04:09:50 PM : [iNST-ERX    ] 02 51 38 7C 3B 33 5D 61 15 2F 00 00 01 1F FF 00 E2 00 33 5D 61 01 00 00 DE

Tue 02/09/2016 04:09:50 PM : [Ext-Direct  ] 38.7C.3B-->ISY/PLM Group=0, Max Hops=1, Hops Left=1

Tue 02/09/2016 04:09:50 PM : [38 7C 3B 0  ] Using Database Link Table offset 0x1FF8 (reported 0x1FF8)

Tue 02/09/2016 04:09:50 PM : [38 7C 3B 1  ] Start : Adding device to ISY

Tue 02/09/2016 04:09:50 PM : [38 7C 3B 1  ] Finish : Adding device to ISY was Successful

Tue 02/09/2016 04:09:50 PM : [iNST-TX-I1  ] 02 62 38 7C 3B 0F 44 09

Tue 02/09/2016 04:09:50 PM : [iNST-ACK    ] 02 62 38.7C.3B 0F 44 09 06                 (09)

Tue 02/09/2016 04:09:51 PM : [iNST-SRX    ] 02 50 38.7C.3B 33.5D.61 2B 44 00           (00)

Tue 02/09/2016 04:09:51 PM : [std-Direct Ack] 38.7C.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 2  ] Start : Adding device to ISY

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 2  ] Finish : Adding device to ISY was Successful

Tue 02/09/2016 04:09:51 PM : [iNST-SRX    ] 02 50 38.7C.3B 33.5D.61 23 44 00           (00)

Tue 02/09/2016 04:09:51 PM : [std-Direct Ack] 38.7C.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=0

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 3  ] Start : Adding device to ISY

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 3  ] Finish : Adding device to ISY was Successful

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 4  ] Start : Adding device to ISY

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 4  ] Finish : Adding device to ISY was Successful

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 5  ] Start : Adding device to ISY

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 5  ] Finish : Adding device to ISY was Successful

Tue 02/09/2016 04:09:51 PM : [iNST-TX-I1  ] 02 62 38 7C 3B 0F 44 02

Tue 02/09/2016 04:09:51 PM : [iNST-ACK    ] 02 62 38.7C.3B 0F 44 02 06                 (02)

Tue 02/09/2016 04:09:51 PM : [iNST-SRX    ] 02 50 38.7C.3B 33.5D.61 2F 44 00           (00)

Tue 02/09/2016 04:09:51 PM : [std-Direct Ack] 38.7C.3B-->ISY/PLM Group=0, Max Hops=3, Hops Left=3

Tue 02/09/2016 04:09:51 PM : [38 7C 3B 0  ] Successfully added device

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 1] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 1]       ST   0

Tue 02/09/2016 04:09:52 PM : [iNST-TX-I1  ] 02 62 1D FE E2 0F 14 00

Tue 02/09/2016 04:09:52 PM : [iNST-ACK    ] 02 62 1D.FE.E2 0F 14 00 06          LTOFF-F(00)

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 2] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 2]       ST   0

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 1] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 1]       ST   0

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 3] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 3]       ST   0

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 4] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 4]       ST   0

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [38 7C 3B 5] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  38 7C 3B 5]       ST   0

Tue 02/09/2016 04:09:52 PM : [All         ] Writing 0 bytes to devices

Tue 02/09/2016 04:09:52 PM : [All         ] Writing 0 bytes to devices

Tue 02/09/2016 04:09:52 PM : [iNST-SRX    ] 02 50 1D.FE.E2 33.5D.61 2B 14 00    LTOFF-F(00)

Tue 02/09/2016 04:09:52 PM : [std-Direct Ack] 1D.FE.E2-->ISY/PLM Group=0, Max Hops=3, Hops Left=2

Tue 02/09/2016 04:09:52 PM : [D2D EVENT   ] Event [1D FE E2 1] [sT] [0] uom=0 prec=-1

Tue 02/09/2016 04:09:52 PM : [  1D FE E2 1]       ST   0

Tue 02/09/2016 04:09:52 PM : [D2D-CMP 0040] STS [1D FE E2 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true

Tue 02/09/2016 04:09:53 PM : [D2D-CMP 0040] STS [1D FE E2 1] ST op=1 Event(val=0 uom=0 prec=-1) is Condition(val=0 uom=0 prec=-1) --> true

Tue 02/09/2016 04:09:53 PM : [D2D-CMP 003C] STS [1D FE E2 1] ST op=6 Event(val=0 uom=0 prec=-1) != Condition(val=0 uom=0 prec=-1) --> false

Tue 02/09/2016 04:10:33 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:10:34 PM : CLI-HAMW: Successfully Processed HAMW Response

Tue 02/09/2016 04:10:34 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:10:34 PM : CLI-HAMW: Successfully Processed HAMW Response

Tue 02/09/2016 04:10:34 PM : CLI-HAMW: Connecting to api.aerisapi.com

Tue 02/09/2016 04:10:35 PM : CLI-HAMW: Successfully Processed HAMW Response

 

 

 

Still only getting 5 stations....

  • Author

Hello Automate The World,

 

Is this a 994i? If so, do you know how many nodes/scenes/folders you have? It might be that you are reaching the 254 limit.

 

With kind regards,

Michel

thanks for the reply Michel. Is there a count somewhere or do I have to literally count each one?

  • Author

Hello Automate The World,

 

Unfortunately no count anywhere. This said, you can definitely use Tools | Generate Topology for a high level view of where you are.

 

With kind regards,

Michel

 

Hi Michel,

 

Thanks for the tip. Instead I had a few devices that I don't use anymore so I deleted them from the system and then re-added the EZFlora and everything is all good!

 

It would have been nice if as I was linking and there were not enough nodes available that a message would tell me so.

 

On a side note I remember thinking about 4 years ago when I bought this ISY that there is no way I would ever need more than 256 devices/nodes and here we are. :-)

 

Thanks for all the help everyone!

Guest
This topic is now closed to further replies.
Go to topic listing

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.