Working on integrating ISY and the SimpleControl (Formerly Roomie Remote).  I am gettting a series of errors in the logs when I try to use the interface from my iphone.

 

 Any troubleshooting help would be appreciated.

 

The IP listed is from my iphone on the home network (192.168.0.115):

Mon 2016/03/14 01:24:30 PM	System	-170001	[Auth:-10011] 192.168.0.115:61284->80, Num=3
Mon 2016/03/14 01:24:31 PM	System	-170001	[Auth:-10011] 192.168.0.115:61285->80, Num=4
Mon 2016/03/14 01:24:31 PM	System	-170001	[Auth:-10011] 192.168.0.115:61286->80, Num=5
Mon 2016/03/14 01:24:33 PM	System	-170001	[Auth:-10011] 192.168.0.115:61287->80, Num=6
Mon 2016/03/14 01:24:33 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:33 PM	System	-170001	[Auth:-10011] 192.168.0.115:61288->80, Num=7
Mon 2016/03/14 01:24:33 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:34 PM	System	-170001	[Auth:-10011] 192.168.0.115:61289->80, Num=8
Mon 2016/03/14 01:24:34 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:34 PM	System	-170001	[Auth:-10011] 192.168.0.115:61290->80, Num=9
Mon 2016/03/14 01:24:34 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:34 PM	System	-170001	[Auth:-10011] 192.168.0.115:61291->80, Num=10
Mon 2016/03/14 01:24:34 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:35 PM	System	-170001	[Auth:-10011] 192.168.0.115:61292->80, Num=11
Mon 2016/03/14 01:24:35 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:35 PM	System	-170001	[Auth:-10011] 192.168.0.115:61293->80, Num=12
Mon 2016/03/14 01:24:35 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:38 PM	System	-170001	[Auth:-10011] 192.168.0.115:61294->80, Num=13
Mon 2016/03/14 01:24:38 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:41 PM	System	-170001	[Auth:-10011] 192.168.0.115:61295->80, Num=14
Mon 2016/03/14 01:24:41 PM	System	-10108	Check log	
Mon 2016/03/14 01:24:44 PM	System	-170001	[Auth:-10011] 192.168.0.115:61296->80, Num=15

Hi BillB66,

 

Those error are related to a client trying to log into ISY with invalid username/password.

 

With kind regards,

Michel

That was my thought as well.  However I have updated the password and ensured that the characters are ascii just incase Roomie is doing something odd with special characters.

 

Any other thoughts?  I have updated the username/password a few times via copy/paste from my password safe.

 

Thanks,

Bill B.

just checked.  Now I am getting nothing in the error log.  However still not working.    Short of wireshark, what other options are there to get troubleshooting data.

Hi BillB66,

 

Those errors are definitely related to Authentication.

 

By not working, what's the error? Do you see anything else in the error log?

 

With kind regards,

Michel