rleidy Posted August 8, 2016 Share Posted August 8, 2016 I posted this question on the MobiLinc forum and Wes is actively helping me there, but I thought I'd check here, too, in case the problem is my ISY configuration. I have a Linear GDOOZ-4 GDO (zwave) and I can operate it just fine from the ISY console, which presents Open and Close buttons to operate the opener. I just got the MobiLinc HD app, and while I can see the GDO in the app, I can't operate the GDO from the app. The status is reported as a number rather than descriptive text. ML shows 0 for closed, 100 for open, and I think 103 for opening and 104 for closing. The ISY rest interface reports the following for the node. <nodeInfo> <node flag="128"> <address>ZW002_1</address> <name>ZWave Linear GDO</name> <family>4</family> <parent type="3">61096</parent> <type>4.64.7.0</type> <enabled>true</enabled> <deviceClass>0</deviceClass> <wattage>0</wattage> <dcPeriod>0</dcPeriod> <pnode>ZW002_1</pnode> <sgid>1</sgid> <devtype> <gen>4.64.7</gen> <mfg>335.18244.13616</mfg> <cat>184</cat> </devtype> <ELK_ID>E11</ELK_ID> <property id="ST" value="0" formatted="Closed" uom="97"/> </node> <properties> <property id="ST" value="0" formatted="Closed" uom="97"/> </properties> </nodeInfo> Does this all look correct from the ISY side? If not, is there something I can do to fix it on my end? Link to comment Share on other sites More sharing options...
Chris Jahn Posted August 8, 2016 Share Posted August 8, 2016 Hi rleidy, The door status value is reported from ISY with a unit of measure of 'barrier status' (uom="97"). I don't want to muddy the waters here, but if you are just seeing raw numbers then I wonder if mobiLinc currently supports that unit of measure. FYI these are the possible values: 0 = Closed100 = Open101 = Unknown102 = Stopped103 = Closing104 = Opening Link to comment Share on other sites More sharing options...
dbuss Posted August 8, 2016 Share Posted August 8, 2016 For what it's worth. I have three Linear GDOOZ-4 GDO openers and they work fine with MobiLinc on both Android and iOS. Link to comment Share on other sites More sharing options...
rleidy Posted August 8, 2016 Author Share Posted August 8, 2016 For what it's worth. I have three Linear GDOOZ-4 GDO openers and they work fine with MobiLinc on both Android and iOS. Well, that's very encouraging. Would you be able to post the rest nodeinfo results for one of them for comparison? Link to comment Share on other sites More sharing options...
dbuss Posted August 8, 2016 Share Posted August 8, 2016 I can do that later this afternoon/evening. Mine are set to Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
dbuss Posted August 8, 2016 Share Posted August 8, 2016 I can do that later this afternoon/evening. Mine are set to Sent from my XT1650 using Tapatalk Mine show up as door locks in mobilinc. Do yours also? Seems as though I had an issue at first with them not showing up as door locks. Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
rleidy Posted August 8, 2016 Author Share Posted August 8, 2016 Mine show up as door locks in mobilinc. Do yours also? Seems as though I had an issue at first with them not showing up as door locks. Sent from my XT1650 using Tapatalk In MobiLinc, mine has the type Barrier. Link to comment Share on other sites More sharing options...
dbuss Posted August 8, 2016 Share Posted August 8, 2016 In MobiLinc, mine has the type Barrier.I'm pretty sure that's your problem. It needs to be door lock. Then it will work. Sent from my XT1650 using Tapatalk Link to comment Share on other sites More sharing options...
rleidy Posted August 9, 2016 Author Share Posted August 9, 2016 Is there some way for me to influence how the ISY reports the type of the device? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.