Scene problem (light goes on 100%, the 10 sec later @ 50%?

[RichTJ99]

Hi,

 

I have four devices:

 

Front Porch

Front Lights

Backyard Lights

Deck Lights

 

All in a scene called "Outside".

 

When I press the front porch light (controller) the other three lights (responders) should all turn on. Basically one light turns all the outside lights on or off.

 

I had originally set this manually (linked by hand). I then wanted to control it all through ISY.

 

I deleted the links & created that outside scene. I started to notice that after I turned the porch light on, the "front" lights dim to what looks like 50% but the ISY seems to think its 100%.

 

Any ideas how to fix this?

 

EDIT1: This is all local at the switch.

 

Thanks,

Rich

 

EDIT: I deleted the scene, then pressed the porch on button (locally) & only the porch turned on, I added the scene again & again the front lights come on, then dim.

[ulrick65]

Unless you have a lot of links for these devices already, I would remove them from ISY, perform a factory reset on each one and then readd them and recreate the scene. That will insure that all the previous links have been removed.

[RichTJ99]

I have a few scenes

 

(all out)

(my lighting)

(Outside)

 

That all uses those items.

 

Should I factory reset that outside front light that dims to 50%?

 

I also am unsure why ISY doesnt see that the front light change from 100% to 50% (my estimate on brightness).

[Michel Kohanim]

Hi Rich,

 

Perhaps it would be a good idea for you to contact our tech support (if you have remote access enabled) and let them walk through it with you.

 

With kind regards,

Michel

 

 

I have a few scenes

 

(all out)

(my lighting)

(Outside)

 

That all uses those items.

 

Should I factory reset that outside front light that dims to 50%?

 

I also am unsure why ISY doesnt see that the front light change from 100% to 50% (my estimate on brightness).