DaveF Posted May 25, 2017 Posted May 25, 2017 Has anyone been able to get these to work? I'm running 5.10 and when included, it shows the following nodes: Glass Break Alarm Intrusion Alarm Motion Sensor Notify Sensor Tamper Alarm Tamper Code Alarm Here is a 'show information' for one of them: Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] ---------------------------------------------- Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] ZW016_1 uid=16 type=4.7.1 mid=265 tid=8193 pid=262 model=0 Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x5E V2 ZWAVEPLUS_INFO Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x72 V2 MANUFACTURER_SPECIFIC Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x5A V1 DEVICE_RESET_LOCALLY Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x80 V1 BATTERY Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x73 V1 POWERLEVEL Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x86 V2 VERSION Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x84 V2 WAKE_UP Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x85 V2 ASSOCIATION Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x59 V1 ASSOCIATION_GRP_INFO Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x71 V4 NOTIFICATION Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x70 V1 CONFIGURATION Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x7A V2 FIRMWARE_UPDATE_MD Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] - x98 V0 SECURITY Thu 05/25/2017 08:14:00 AM : [ZW-SHOW ] Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] Node 16 - ZW 016 Notify Sensor has the following neighbors Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - - Node 1 - [This ISY] Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - Repeater - Node 6 - Gxxxx Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - Repeater - Node 8 - Axxxx Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - Repeater - Node 9 - Zxxxx Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - Repeater - Node 10 - Bxxxx Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] - Repeater - Node 11 - Fxxxx Thu 05/25/2017 08:14:01 AM : [ZW-SHOW ] Thu 05/25/2017 08:14:17 AM : [ZW-SHOW ] Node 16 - ZW 016 Notify Sensor cannot retrieve association groups Thu 05/25/2017 08:14:17 AM : [ZW-SHOW ] Thu 05/25/2017 08:14:17 AM : [ZW-SHOW ] ----------------------------------------------
DaveF Posted May 25, 2017 Author Posted May 25, 2017 Forgot to add.... While none of the nodes show anything when I trigger the sensor, I do see this in the level 3 logs: Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ZW016_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x10 Thu 05/25/2017 08:28:28 AM : [ZWAVE-TX ] ... Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ] [0104011301E8] [00/00] CC=0x00 cmd=0x00 [] ACK,AUTO,EXPLORE Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ] [010500130D00E4] [00/00] CC=0x00 cmd=0x00 [] ACK,AUTO,EXPLORE Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ZW016_1] [98/81] Security cmd=0x81 [695E1BCD6BAF7264518D025D3900687F9805E605B1] ACK,AUTO,EXPLORE From=0x10 Thu 05/25/2017 08:28:28 AM : [ZWAVE-RD ZW016_1] [20/01] Basic Set val=0x00 ACK,AUTO,EXPLORE From=0x10 Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ZW016_1] [98/40] Security Nonce Get ACK,AUTO,EXPLORE From=0x10 Thu 05/25/2017 08:28:28 AM : [ZWAVE-TX ] ... Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ] [0104011301E8] [00/00] CC=0x00 cmd=0x00 [] ACK,AUTO,EXPLORE Thu 05/25/2017 08:28:28 AM : [ZWAVE-RX ] [010500130F00E6] [00/00] CC=0x00 cmd=0x00 [] ACK,AUTO,EXPLORE Thu 05/25/2017 08:28:29 AM : [ZWAVE-RX ZW016_1] [98/81] Security cmd=0x81 [335F4CD937E9632CFFF42851D0F411A0412980CE2E056394C7D60F6A] ACK,AUTO,EXPLORE From=0x10 Thu 05/25/2017 08:28:29 AM : [ZWAVE-RD ZW016_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [060000FF06170000] ACK,AUTO,EXPLORE From=0x10
Chris Jahn Posted May 25, 2017 Posted May 25, 2017 Hi DaveF, The output shows that there are some events being generated that we do not yet support. I'll add this the list.
cswelin Posted August 1, 2017 Posted August 1, 2017 Came here looking for this exact answer as well, looking forward to seeing support in the future
cswelin Posted December 9, 2017 Posted December 9, 2017 Hi DaveF, The output shows that there are some events being generated that we do not yet support. I'll add this the list. Hey Chris, Was hoping the new .11 alpha would have supported this device, how big this list? (could image rather large). Out of curiosity, when 5.0 is official, how often would device updates be released? Here's some more logs if needed. Sat 12/09/2017 02:00:45 PM : Starting Subscription Sat 12/09/2017 02:00:45 PM : Completing initialization Sat 12/09/2017 02:00:46 PM : Refreshing Status Sat 12/09/2017 02:00:46 PM : Refreshing Views Sat 12/09/2017 02:02:39 PM : [ZWAVE-WAKEUP 2.000] Query device when awake ZW002_1 Sat 12/09/2017 02:05:33 PM : [ZWAVE-RX ZW002_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [000000FF06170000] ACK,AUTO,EXPLORE From=0x02 Sat 12/09/2017 02:05:34 PM : [ZWAVE-RX ZW002_1] [80/03] Battery Report level=0x64 ACK,AUTO,EXPLORE From=0x02 Sat 12/09/2017 02:06:04 PM : [ZWAVE-RX ZW002_1] [71/05] Alarm Report [0616] Unrecognized Event 0x16 [000000FF06160000] ACK,AUTO,EXPLORE From=0x02 Sat 12/09/2017 02:06:05 PM : [ZWAVE-RX ZW002_1] [80/03] Battery Report level=0x64 ACK,AUTO,EXPLORE From=0x02 Sat 12/09/2017 02:06:19 PM : [ZWAVE-RX ZW002_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [000000FF06170000] ACK,AUTO,EXPLORE From=0x02 Sat 12/09/2017 02:06:20 PM : [ZWAVE-RX ZW002_1] [80/03] Battery Report level=0x64 ACK,AUTO,EXPLORE From=0x02
asbril Posted August 22, 2018 Posted August 22, 2018 On 5/25/2017 at 12:37 PM, Chris Jahn said: The output shows that there are some events being generated that we do not yet support. I'll add this the list. Chris, I just got this sensor and was hoping that this is fixed but it appears not yet. Any news ?
julianl68 Posted October 3, 2018 Posted October 3, 2018 Well I bought 8 of these and didn't realize that they are not working (yet). I did get the binary switch to come on by setting parameter 14 to 1. This enables "basic set". Still gives the same error in the viewer but I am able to use it. Does anyone now if this could cause unforeseen issues? Thanks
DaveF Posted December 28, 2018 Author Posted December 28, 2018 With 5.0.14, the basic sensor works, but the Notify Sensor give me an error every 10 minutes.
mwester Posted December 28, 2018 Posted December 28, 2018 I'm assuming the device in question is a battery-powered device -- in the options menu for that device in the admin console, you'll find an option that allows you to tell the ISY that the device is battery-powered, in which case it won't try to talk to it until the device wakes up and checks in. If that's already selected, unselect it, then select it again just to make sure the setting is correct.
DaveF Posted December 28, 2018 Author Posted December 28, 2018 I have 'always awake' set to 'no'. I can try toggling it.
DaveF Posted April 1, 2019 Author Posted April 1, 2019 Just a followup. I'm still seeing this error whenever the admin console is open. I also have upgraded to 5.0.15 and while the 'Notify Sensor' node seems to report battery levels, I'm not seeing anything (even in level3 debug) when the door opens/closes.
berko Posted June 21, 2019 Posted June 21, 2019 I see this on door opening Fri 06/21/2019 09:24:05 AM : [ZWAVE-RX ZW003_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [000000FF06170000] ACK,AUTO,EXPLORE From=0x03 Fri 06/21/2019 09:24:06 AM : [ZWAVE-RX ZW003_1] [80/03] Battery Report level=0x64 ACK,AUTO,EXPLORE From=0x03 Fri 06/21/2019 09:24:36 AM : [ZWAVE-RX ZW003_1] [71/05] Alarm Report [0616] Unrecognized Event 0x16 [000000FF06160000] ACK,AUTO,EXPLORE From=0x03 Fri 06/21/2019 09:24:37 AM : [ZWAVE-RX ZW003_1] [80/03] Battery Report level=0x64 ACK,AUTO,EXPLORE From=0x03 Tamper alarm switch works perfectly Anybody have any success with this? I am running v5.0.13d
JamesC Posted July 14, 2019 Posted July 14, 2019 Just bought the recessed door sensor (#15268) and found out it doesn't work with the ISY (yet at least) - running version 5.0.15A. It includes just fine, and the tamper switch works, and I do see events in the log very much like the ones berko mentioned when the door opens/closes. Tried setting parameter 14 to 1 and that didn't help. Hope these can be made to work. Sun 07/14/2019 03:32:00 PM : [ZWAVE-RX ZW040_1] [71/05] Alarm Report [0616] Unrecognized Event 0x16 [06FF00FF06160000] ACK,AUTO,EXPLORE From=0x28 Sun 07/14/2019 03:32:00 PM : [ZWAVE-RX ZW040_1] [71/05] Alarm Report [0616] Unrecognized Event 0x16 [06FF00FF06160000] ACK,AUTO,EXPLORE From=0x28 Sun 07/14/2019 03:32:02 PM : [ZWAVE-RX ZW040_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [060000FF06170000] ACK,AUTO,EXPLORE From=0x28 Sun 07/14/2019 03:32:02 PM : [ZWAVE-RX ZW040_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [060000FF06170000] ACK,AUTO,EXPLORE From=0x28 Event 0x16 is when the door opens, 0x17 is when it closes.
Gaetan Posted August 8, 2019 Posted August 8, 2019 I bought an Aeotec ZW120 Door/Window Sensor Gen 5 and after a while.. I managed to include it to my Zwave network. The inclusion process does not go as documented by Aeotec. The red led is supposed to blink for a few seconds and then turn solid red for 2 seconds and stop. In my 5.0.15A environment, after the red led is solid red for 2 seconds, it start blinking again. The tamper switch works flawlessly but the Binary Sensor 1 does not work; Wed 08/07/2019 19:56:21 : [ZWAVE-RX ZW027_1] [20/01] Basic Set val=0xFF ACK,AUTO,EXPLORE From=0x1B Wed 08/07/2019 19:56:21 : [ZWAVE-RX ZW027_1] [71/05] Alarm Report [0616] Unrecognized Event 0x16 [000000FF06160000] ACK,AUTO,EXPLORE From=0x1B Wed 08/07/2019 19:56:22 : [ZWAVE-RX ZW027_1] [20/01] Basic Set val=0x00 ACK,AUTO,EXPLORE From=0x1B Wed 08/07/2019 19:56:22 : [ZWAVE-RX ZW027_1] [71/05] Alarm Report [0617] Unrecognized Event 0x17 [000000FF06170000] ACK,AUTO,EXPLORE From=0x1B Without support for events 0x16 and 0x17, the ZW120 Door/Window Sensor Gen is pretty much useless. I will probably have to return it for a refund as there is no saying when the ISY994i will support events 0x16 and 0x17.
blueman2 Posted August 24, 2019 Posted August 24, 2019 Put me down also for the monoprice battery powered z-wave door sensors not working in 5.0.15A. Hope these get supported soon as I bought 8 of them!
blueman2 Posted August 24, 2019 Posted August 24, 2019 And while on the topic of z-wave commands that are not being recognized but show up in level 3 device comms, here is another. Thu 06/21/2018 09:38:10 AM : [ZWAVE-RX ZW044_1] [60/06] CC=0x60 cmd=0x06 [022503FF] ACK,AUTO,EXPLORE From=0x2C Thu 06/21/2018 09:38:11 AM : [ZWAVE-RX ZW044_1] [60/06] CC=0x60 cmd=0x06 [02250300] ACK,AUTO,EXPLORE From=0x2C While the ISY controls this device, the ISY does not see changes made to the device itself and therefore is often not in correct synch. This is from my Intermatic pool controller. It shows the on(FF) and off(00) commands are being sent to the ISY, but the ISY is not seeing them and is not updating the device status. @Chris Jahn or @Michel Kohanim, any help in getting these requests on your list would be very much appreciated. Bob
Chris Jahn Posted August 26, 2019 Posted August 26, 2019 Hi Guys, We are fixing the monoprice 0x0616/0x0617 issues, but we'll have to take a closer look at the [60/06] issue with the intermatic pool controller. It looks like its using an older Z-Wave feature related to Multi Channel (called Multi-Instance).
blueman2 Posted August 26, 2019 Posted August 26, 2019 12 minutes ago, Chris Jahn said: Hi Guys, We are fixing the monoprice 0x0616/0x0617 issues, but we'll have to take a closer look at the [60/06] issue with the intermatic pool controller. It looks like its using an older Z-Wave feature related to Multi Channel (called Multi-Instance). Thanks so much. Great to hear on the monoprice devices. Looking forward to it. And a fix for the [60/06] issue would be deeply, deeply appreciated! Not having pool controller updates has long been an issue for me.
DaveF Posted October 13, 2019 Author Posted October 13, 2019 I upgraded to 5.0.16 and the sensor is working again. I now have the following nodes: Door Lock 1 (Reports an Alarm state of "Window/Door is Open") Tamper (Status on/off depending on tamper switch) Notify Sensor (reports battery level) Barrier (reports status of Open/Closed) and the following that don't seem to be used Glass Break Alarm 1 Intrusion Alarm 1 Motion Sensor 1 Tamper Code Alarm 1 Would be nice to see all of the status under one node, but at least it's working again.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.