Problems adding EZFlora to ISY

[leonpc]

I am using ISy994 with UI at 5.0.10 and Firmware at 5.0.10.

 

I added the EZFlora to the ISY and then got the following message during the process:

 

I clicked on the FINISH button and it added the EZFLORA but no Zones or anything is listed:

 

I have also removed the EzFlora and added it back in manually by setting the address and selecting the device type 04.00 EzFlora/EzRain.  It then adds the EzFlora but still adds it as an unsupported device as per the screenshot above.

 

 

ISY-Events-Log.v5.0.10__Sun 2017.08.13 01.23.10 PM.txt

[Michel Kohanim]

Hi leonpc,

 

Added as a bug #469.

 

With kind regards,

Michel

[oamber]

I have this problem, what does this mean for getting the controller working?

[Michel Kohanim]

oamber,

 

5.x is alpha. So, it means we'll fix in in the next release. If you wish, you can go back to 4.x. It should work.

 

With kind regards,

Michel

[oamber]

Im running v4.6.2, but I cannot make the new controller work. Its been cooler here after one hot summer, so I just water by hand. This drives me crazy, being used to automation. 

 

I just wanted to make sure I'm not doing something wrong that is readily apparent to those who know. It would be nice to have my controller working again. 

 

thanks!

[Michel Kohanim]

Hi oamber,

 

Please contact smartenit. They may have to reflash your EZFlora to work with ISY.

 

With kind regards,

Michel