miataguy Posted November 5, 2017 Posted November 5, 2017 I have 2 Switchlinc devices (2477S) set up in a scene to control one light. One of the two is wired to the load and is the responder, the other has no load connected and is a controller. If I turn the light on or off from the controller, all is well. But if I turn the light on locally at the responder, the controller switch does not indicate the on/off status of the load. How can I make the controller show the correct load status regardless of how the load is controlled?
G W Posted November 5, 2017 Posted November 5, 2017 You need to make it a controller. Sent from my SM-G955U1 using Tapatalk
miataguy Posted November 5, 2017 Author Posted November 5, 2017 You need to make it a controller. Sent from my SM-G955U1 using Tapatalk I need to make what a controller? The responder? How do I do that? I can only set it up as a controller or a responder.
lilyoyo1 Posted November 5, 2017 Posted November 5, 2017 Both devices need to be controllers in your scene. That way if either is turned on the other responds accordingly and keeps its status in place 1
stusviews Posted November 5, 2017 Posted November 5, 2017 Info only: an ISY controller cannot be a controller only, it is also a responder. But, a responder is only a responder.
Recommended Posts