On/Off Receptacle Turns On at 3 AM

[jgcharlotte]

I have one on/off receptacle that, for some reason, turns ON at the 3 am Query.  I have another one that controls the den fireplace that doesn't do that.

Has anyone seen that?

Scene:~ISY	Status	Query	Wed 2018/05/02 03:00:00 AM	Program	Log
_MBR Bath Receptacle.1 On-Off	Status	100%	Wed 2018/05/02 03:00:47 AM	System	Log
MASTER-Bath Heater	Status	100%	Wed 2018/05/02 03:00:47 AM	System	Log

[paulbates]

Is the receptacle controlled via scene from an io_linc? Iolincs that that have trigger reverse can be triggered by the 3am query and their scenes triggered, and downstream devices activated/deactivated.

If not, via a scene from another device type?  Please describe how this unit is configured with insteon and other devices.

Potentially a factory reset and "Restore Device" might help, but that's guessing in the backdrop of not knowing the full picture.

Paul

[jgcharlotte]

It is in a scene with another space heater so both can be controlled via Echo device "turn both heaters off'.

It is controlled on/off by mini-remote

It is controlled on/off by KPL. I have my KPL buttons configured (via programming) as 'press on/press off'.  The indicator for that button is in a scene controlled by status of the outlet control.

Not even close to an I/O Linc. 

Thanks!

Edited May 2, 2018 by jgcharlotte

[larryllix]

As per Paul above, was the device factory reset before adding into your Insteon system upon first implementation?

[jgcharlotte]

No, sounds like I should do that.

[oberkc]

Does it behave this way if the space heater is unplugged?

if you manually ran the query program, does the problem reveal itself?