wxmike Posted December 2, 2018 Posted December 2, 2018 Fibaro motion sensor - Is this sensor compatable with ISY ? 1- Does not show status on multilevel sensor1 2- does not show motion (always off) 3E98D0A1-D7B8-4C50-B6B6-C46FD755DD02.SNAG 18444E23-48AF-46B9-8BC1-03D57CE4121B.SNAG 068DD456-F1E9-4EBC-A590-65C485F35BC5.SNAG 07DB878A-0C76-487D-89FC-CDA9BF6D8D78.SNAG 6C7297CC-B418-4106-92C9-E7A74CAF66DA.SNAG
gviliunas Posted December 5, 2018 Posted December 5, 2018 I tried it but could never get it to work. Returned to Amazon.
lilyoyo1 Posted December 5, 2018 Posted December 5, 2018 I have about a dozen of them and mine works without issue. I'm using the 5.0.14 firmware. I would check your firmware and clear your Java cache. It also may not be in range.
tosterhouse Posted December 19, 2018 Posted December 19, 2018 I am also having the same issue. It connected to ISY just fine but will not respond? Is there a recommendation for another motion sensor that is more reliable and small?
lilyoyo1 Posted February 21, 2019 Posted February 21, 2019 @Michel Kohanim did something change with the fibaro? I bought a new one and what others are experiencing I am too. I removed 1 from my system that was working and im encountering the same thing with that as well.
simplextech Posted February 21, 2019 Posted February 21, 2019 I sent in a fairly decent diagnostic of the Fibaro to support. I hope support for it will improve. From what I gather UDI is doing some fairly large changes in how they are addressing/handling z-wave devices to make adding support easier/faster. I'm hoping that change comes soon but I expect it will be another firmware release to incorporate the changes.
lilyoyo1 Posted February 21, 2019 Posted February 21, 2019 2 hours ago, simplextech said: I sent in a fairly decent diagnostic of the Fibaro to support. I hope support for it will improve. From what I gather UDI is doing some fairly large changes in how they are addressing/handling z-wave devices to make adding support easier/faster. I'm hoping that change comes soon but I expect it will be another firmware release to incorporate the changes. I think its Isy based. When I removed one of my sensors that was once working with the ISY it no longer works now when I re-add it. The others still work but they were added a long time ago. If it was only the new sensor then it may be their firmware but since im having trouble with existing stuff it may be something in the code.
simplextech Posted February 21, 2019 Posted February 21, 2019 11 minutes ago, lilyoyo1 said: I think its Isy based. When I removed one of my sensors that was once working with the ISY it no longer works now when I re-add it. The others still work but they were added a long time ago. If it was only the new sensor then it may be their firmware but since im having trouble with existing stuff it may be something in the code. I should have clarified I sent the info to UDI support 2
Recommended Posts