markhamk Posted May 16, 2009 Posted May 16, 2009 Earlier today I upgraded to 2.7.3. I did not post this in the beta forum since there is a possibility it is not related. I removed two devices (lamplincs) and readded. The first readded with no issues. The second fails with the following errors: -200000 Failed writing the high water mark n/a -200000 Note not added - failed removing link. How do I begin to troubleshoot and resolve? Thanks
Sub-Routine Posted May 16, 2009 Posted May 16, 2009 Hi Mark, How many devices do you have? What is your PLM version? Rand
Rich Posted May 17, 2009 Posted May 17, 2009 I just hit this too with a rev 1.1 motion sensor, v72 PLM, 26 devices. Thanks, Rich.
danswatman Posted May 18, 2009 Posted May 18, 2009 I also get the error trying to install a second remotlinc.... I only have about 50 devices.
Michel Kohanim Posted May 18, 2009 Posted May 18, 2009 Hi, Please do make sure your RL and/or MS are in programming mode and accessible (close to some Access Points). Please do keep us posted. With kind regards, Michel
danswatman Posted May 19, 2009 Posted May 19, 2009 No luck so far with any of those methods.... I have this in the log: 2009/05/18 21:06:36 : CLI-WBug: Successfully Processed WBug Response 2009/05/18 21:06:41 : ---- Initializing the linked devices ---- 2009/05/18 21:06:41 : ---- All Linked Devices are now initialized ---- 2009/05/18 21:06:41 : ---- Add remaining devices ---- 2009/05/18 21:06:41 : [ A0 31 A0 1] Removing all links 2009/05/18 21:06:41 : [A0 31 A0 1] Querying engine version 2009/05/18 21:06:41 : [iNST-ACK ] 02 62 A0.31.A0 0F 0D 00 06 (00) 2009/05/18 21:06:46 : CLI-WBug: Connecting to http://datafeed.weatherbug.com/GetXml.a ... UnitType=0 2009/05/18 21:06:46 : CLI-WBug: Successfully Processed WBug Response 2009/05/18 21:06:48 : [iNST-ACK ] 02 62 A0.31.A0 0F 0D 00 06 (00) 2009/05/18 21:06:55 : [iNST-ACK ] 02 62 A0.31.A0 0F 0D 00 06 (00) 2009/05/18 21:06:56 : CLI-WBug: Connecting to http://datafeed.weatherbug.com/GetXml.a ... UnitType=0 2009/05/18 21:06:56 : CLI-WBug: Successfully Processed WBug Response 2009/05/18 21:06:57 : [A0 31 A0 1] Failed getting engine version. Reverting to i1. 2009/05/18 21:06:57 : [] Using engine version i1 2009/05/18 21:06:57 : [iNST-ACK ] 02 62 A0.31.A0 0F 28 0F 06 SET-MSB(0F) 2009/05/18 21:07:04 : [iNST-ACK ] 02 62 A0.31.A0 0F 28 0F 06 SET-MSB(0F) 2009/05/18 21:07:06 : CLI-WBug: Connecting to http://datafeed.weatherbug.com/GetXml.a ... UnitType=0 2009/05/18 21:07:06 : CLI-WBug: Successfully Processed WBug Response 2009/05/18 21:07:11 : [iNST-ACK ] 02 62 A0.31.A0 0F 28 0F 06 SET-MSB(0F) 2009/05/18 21:07:13 : [ A0 31 A0 1] ** Not added ** Remove Device Links failed 2009/05/18 21:07:13 : ---- All Remaining Device Added ----
Rich Posted May 19, 2009 Posted May 19, 2009 Me either, I can add the motion sensor as a new device but fails everytime I try and add it to a scene.
Michel Kohanim Posted May 19, 2009 Posted May 19, 2009 Hello danswatman, Thanks for the logs. They indicate that ISY cannot even communicate with your RL. Are you sure your RL is in Programming mode and that it is within the range of an Access Point? To test, click any buttons on your RL and notice the LED on the Access Points and the PLM; make sure they blink. If not, then, in all likelihood, we either have a battery issue or a signal issue. Rich, I must humbly ask the same questions: are you aware that your MS should be in programming mode before you can add it to any scenes? With kind regards, Michel
markhamk Posted May 20, 2009 Author Posted May 20, 2009 This error started after going to latest Beta. I read other posts in the Beta 2.7.3 thread and see other communication related errors. I have not had communication errors prior to this release and there have been no changes to the topology. I am using an IS99y/IR Pro with 29 Insteon devices. I tried again this PM with error. Event log posted. 2009/05/19 19:58:18 : [Office Table Lamp] Start : Adding to scene 'All Lights' 2009/05/19 19:58:18 : [Office Table Lamp] Making 'All Lights' a Controller 2009/05/19 19:58:18 : [Office Table Lamp] Making PLM group 17 a Controller 2009/05/19 19:58:18 : [MNG-LNK-RSP ] 02 6F 40 E2 11 0A 9A 95 01 07 32 15 2009/05/19 19:58:18 : [Office Table Lamp] Using engine version i1 2009/05/19 19:58:18 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:20 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 28 0F SET-MSB(0F) 2009/05/19 19:58:25 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:27 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 28 0F SET-MSB(0F) 2009/05/19 19:58:27 : [iNST-ACK ] 02 62 0A.9A.95 0F 2B F0 06 PEEK (F0) 2009/05/19 19:58:28 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 2B A2 PEEK (A2) 2009/05/19 19:58:28 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:28 : [iNST-ERX ] 02 51 0A 9A 95 0F 45 0F 75 41 79 EA C4 AA 88 0F 04 F8 40 38 C3 52 92 89 0E 2009/05/19 19:58:29 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 23 28 0F SET-MSB(0F) 2009/05/19 19:58:29 : [iNST-ACK ] 02 62 0A.9A.95 0F 2B F1 06 PEEK (F1) 2009/05/19 19:58:30 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 2B 11 PEEK (11) 2009/05/19 19:58:30 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:30 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 28 0F SET-MSB(0F) 2009/05/19 19:58:30 : [iNST-ACK ] 02 62 0A.9A.95 0F 2B F2 06 PEEK (F2) 2009/05/19 19:58:30 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 2B 0F PEEK (0F) 2009/05/19 19:58:31 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:33 : [iNST-SRX ] 02 50 0A.9A.95 0F.45.0F 2B 28 0F SET-MSB(0F) 2009/05/19 19:58:37 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:44 : [iNST-ACK ] 02 62 0A.9A.95 0F 28 0F 06 SET-MSB(0F) 2009/05/19 19:58:46 : [Office Table Lamp] Finish : Adding to scene 'All Lights' was Incomplete 2009/05/19 19:58:58 : [ Time] 19:59:03 3(0)
Rich Posted May 20, 2009 Posted May 20, 2009 Hi Michel, yup, it is in programming mode, i can remove and re-add it as a device, it just fails when trying to add it to a scene.
danswatman Posted May 20, 2009 Posted May 20, 2009 I believe mine is in the programing mode??? by the holding of bright and dim and then getting the blinking light? Anyway it now seems to have the below issue when being added to any scenes.... 2009/05/19 21:09:36 : [0A.31.0A.2] Start : Adding to scene 'Hallway Lights' 2009/05/19 21:09:36 : [0A.31.0A.2] Making PLM a Responder to group 2 2009/05/19 21:09:36 : [MNG-LNK-RSP ] 02 6F 41 A2 02 0A 31 0A 00 05 00 15 2009/05/19 21:09:36 : [0A.31.0A.2] Making 'Hallway:Main' a Responder 2009/05/19 21:09:36 : [0A.31.0A.2] Making 'Hallway:Control' a Responder 2009/05/19 21:09:36 : [0A.31.0A.2] Making 'Hallway:Bottom Stair' a Responder 2009/05/19 21:09:36 : [0A.31.0A.2] Making 'Hallway:Far Switch' a Responder 2009/05/19 21:09:36 : [0A.31.0A.2] Using engine version i1 2009/05/19 21:09:36 : [iNST-ACK ] 02 62 0A.31.0A 0F 28 0F 06 SET-MSB(0F) 2009/05/19 21:09:44 : [iNST-ACK ] 02 62 0A.31.0A 0F 28 0F 06 SET-MSB(0F) 2009/05/19 21:09:51 : [iNST-ACK ] 02 62 0A.31.0A 0F 28 0F 06 SET-MSB(0F) 2009/05/19 21:09:53 : [0A.31.0A.2] Finish : Adding to scene 'Hallway Lights' was Incomplete
Michel Kohanim Posted May 20, 2009 Posted May 20, 2009 Hello all, Apologies for a tardy reply. It seems that in both cases, ISY fails to set MSB to 0x0F. To me, this is a very ominous sign that, perhaps, the new RLs do not respond to i1 mode messages for programming. Would any of you be kind enough to go to Link Management | Advanced Options and check "Device Reported" and retry (please do make sure to revert to Automatic at the end of this experiment)? Thanks and with kind regards, Michel
danswatman Posted May 23, 2009 Posted May 23, 2009 Looks like you are correct the new RL which this one is seems to do fine in that device reported mode, which seems to be i2. Using that option the link works fine. no problem with the slow reply I had pretty much decided this was a bit more than I wanted to tackle at the mommet... I did get my insteon venstar installed though.... 2009/05/23 09:16:03 : [0A.31.0A.1] Start : Adding to scene 'Kitchen Main Lights' 2009/05/23 09:16:03 : [0A.31.0A.1] Making PLM a Responder to group 1 2009/05/23 09:16:03 : [MNG-LNK-RSP ] 02 6F 41 A2 01 0A 31 0A 00 05 00 15 2009/05/23 09:16:03 : [0A.31.0A.1] Making 'Kitchen:Main Lights Right' a Responder 2009/05/23 09:16:03 : [A 31 A 1] Querying engine version 2009/05/23 09:16:04 : [iNST-ACK ] 02 62 0A.31.0A 0F 0D 00 06 (00) 2009/05/23 09:16:04 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 0D 01 (01) 2009/05/23 09:16:04 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:04 : [A 31 A 1] Retrieved engine version is i2 2009/05/23 09:16:04 : [0A.31.0A.1] Using engine version i2 2009/05/23 09:16:04 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 00 0F B7 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/05/23 09:16:05 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:05 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:06 : [iNST-ERX ] 02 51 0A 31 0A 0F D4 07 12 2F 00 00 01 0F B7 01 00 00 00 00 00 00 00 00 00 2009/05/23 09:16:06 : [Extended-Direct][0A.31.0A-->ISY/PLM Group=0] Max Hops=2, Hops Left=0 2009/05/23 09:16:06 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 02 0F B7 08 E2 01 11 6C CF 00 00 01 00 06 (00) 2009/05/23 09:16:07 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:07 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:07 : [11 6C CF 1] Querying engine version 2009/05/23 09:16:07 : [iNST-ACK ] 02 62 11.6C.CF 0F 0D 00 06 (00) 2009/05/23 09:16:08 : [iNST-SRX ] 02 50 11.6C.CF 0F.D4.07 2B 0D 01 (01) 2009/05/23 09:16:08 : [standard-Direct Ack][11.6C.CF-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:08 : [11 6C CF 1] Retrieved engine version is i2 2009/05/23 09:16:08 : [Kitchen] Using engine version i2 2009/05/23 09:16:08 : [iNST-ACK ] 02 62 11.6C.CF 1F 2F 00 00 00 0F C7 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/05/23 09:16:08 : [iNST-SRX ] 02 50 11.6C.CF 0F.D4.07 2B 2F 00 (00) 2009/05/23 09:16:09 : [standard-Direct Ack][11.6C.CF-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:09 : [iNST-ERX ] 02 51 11 6C CF 0F D4 07 11 2F 00 01 01 0F C7 01 00 00 00 00 00 00 00 00 00 2009/05/23 09:16:09 : [Extended-Direct][11.6C.CF-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/05/23 09:16:09 : [iNST-ACK ] 02 62 11.6C.CF 1F 2F 00 00 02 0F C7 08 A2 01 0A 31 0A FF 1F 01 00 06 (00) 2009/05/23 09:16:09 : [iNST-SRX ] 02 50 11.6C.CF 0F.D4.07 2B 2F 00 (00) 2009/05/23 09:16:09 : [standard-Direct Ack][11.6C.CF-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:09 : [0A.31.0A.1] Making 'Kitchen:Main Lights Left' a Responder 2009/05/23 09:16:09 : [0A.31.0A.1] Using engine version i2 2009/05/23 09:16:10 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 00 0F AF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/05/23 09:16:10 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:11 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:11 : [iNST-ERX ] 02 51 0A 31 0A 0F D4 07 12 2F 00 00 01 0F AF 01 00 00 00 00 00 00 00 00 00 2009/05/23 09:16:11 : [Extended-Direct][0A.31.0A-->ISY/PLM Group=0] Max Hops=2, Hops Left=0 2009/05/23 09:16:11 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 02 0F AF 08 E2 01 11 6A 06 00 00 01 00 06 (00) 2009/05/23 09:16:12 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:12 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:12 : [11 6A 6 1] Querying engine version 2009/05/23 09:16:12 : [iNST-ACK ] 02 62 11.6A.06 0F 0D 00 06 (00) 2009/05/23 09:16:12 : [iNST-SRX ] 02 50 11.6A.06 0F.D4.07 2B 0D 01 (01) 2009/05/23 09:16:12 : [standard-Direct Ack][11.6A.06-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:12 : [11 6A 6 1] Retrieved engine version is i2 2009/05/23 09:16:12 : [Kitchen] Using engine version i2 2009/05/23 09:16:12 : [iNST-ACK ] 02 62 11.6A.06 1F 2F 00 00 00 0F C7 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/05/23 09:16:13 : [iNST-SRX ] 02 50 11.6A.06 0F.D4.07 2B 2F 00 (00) 2009/05/23 09:16:13 : [standard-Direct Ack][11.6A.06-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:13 : [iNST-ERX ] 02 51 11 6A 06 0F D4 07 11 2F 00 01 01 0F C7 01 00 00 00 00 00 00 00 00 00 2009/05/23 09:16:13 : [Extended-Direct][11.6A.06-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/05/23 09:16:13 : [iNST-ACK ] 02 62 11.6A.06 1F 2F 00 00 02 0F C7 08 A2 01 0A 31 0A FF 1F 01 00 06 (00) 2009/05/23 09:16:14 : [iNST-SRX ] 02 50 11.6A.06 0F.D4.07 2B 2F 00 (00) 2009/05/23 09:16:14 : [standard-Direct Ack][11.6A.06-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:14 : [0A.31.0A.1] Making 'Hallway:Control A' a Responder 2009/05/23 09:16:14 : [0A.31.0A.1] Using engine version i2 2009/05/23 09:16:14 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 00 0F A7 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/05/23 09:16:15 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:15 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:15 : [iNST-ERX ] 02 51 0A 31 0A 0F D4 07 11 2F 00 00 01 0F A7 01 00 00 00 00 00 00 00 00 00 2009/05/23 09:16:15 : [Extended-Direct][0A.31.0A-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/05/23 09:16:15 : [iNST-ACK ] 02 62 0A.31.0A 1F 2F 00 00 02 0F A7 08 E2 01 07 98 0F 00 00 01 00 06 (00) 2009/05/23 09:16:16 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 27 2F 00 (00) 2009/05/23 09:16:16 : [standard-Direct Ack][0A.31.0A-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:16 : [7 98 F 1] Querying engine version 2009/05/23 09:16:16 : [iNST-ACK ] 02 62 07.98.0F 0F 0D 00 06 (00) 2009/05/23 09:16:16 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 0D 00 (00) 2009/05/23 09:16:16 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:16 : [7 98 F 1] Retrieved engine version is i1 2009/05/23 09:16:16 : [Hallway] Using engine version i1 2009/05/23 09:16:16 : [iNST-ACK ] 02 62 07.98.0F 0F 28 0F 06 SET-MSB(0F) 2009/05/23 09:16:16 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 28 0F SET-MSB(0F) 2009/05/23 09:16:17 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:17 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 60 06 PEEK (60) 2009/05/23 09:16:17 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 27 2B 00 PEEK (00) 2009/05/23 09:16:17 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:17 : [iNST-ACK ] 02 62 07.98.0F 0F 29 A2 06 POKE (A2) 2009/05/23 09:16:17 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 A2 POKE (A2) 2009/05/23 09:16:17 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:18 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 61 06 PEEK (61) 2009/05/23 09:16:18 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:18 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:18 : [iNST-ACK ] 02 62 07.98.0F 0F 29 01 06 POKE (01) 2009/05/23 09:16:19 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 01 POKE (01) 2009/05/23 09:16:19 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:19 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 62 06 PEEK (62) 2009/05/23 09:16:19 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:19 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:19 : [iNST-ACK ] 02 62 07.98.0F 0F 29 0A 06 POKE (0A) 2009/05/23 09:16:19 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 0A POKE (0A) 2009/05/23 09:16:19 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:20 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 63 06 PEEK (63) 2009/05/23 09:16:20 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 27 2B 00 PEEK (00) 2009/05/23 09:16:20 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/05/23 09:16:20 : [iNST-ACK ] 02 62 07.98.0F 0F 29 31 06 POKE (31) 2009/05/23 09:16:20 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 31 POKE (31) 2009/05/23 09:16:20 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:21 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 64 06 PEEK (64) 2009/05/23 09:16:21 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:21 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:21 : [iNST-ACK ] 02 62 07.98.0F 0F 29 0A 06 POKE (0A) 2009/05/23 09:16:21 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 0A POKE (0A) 2009/05/23 09:16:21 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:22 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 65 06 PEEK (65) 2009/05/23 09:16:22 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:22 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:22 : [iNST-ACK ] 02 62 07.98.0F 0F 29 FF 06 POKE (FF) 2009/05/23 09:16:22 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 FF POKE (FF) 2009/05/23 09:16:22 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:23 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 66 06 PEEK (66) 2009/05/23 09:16:23 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:23 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:23 : [iNST-ACK ] 02 62 07.98.0F 0F 29 1F 06 POKE (1F) 2009/05/23 09:16:24 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 1F POKE (1F) 2009/05/23 09:16:24 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:24 : [iNST-ACK ] 02 62 07.98.0F 0F 2B 67 06 PEEK (67) 2009/05/23 09:16:24 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 2B 00 PEEK (00) 2009/05/23 09:16:24 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:24 : [iNST-ACK ] 02 62 07.98.0F 0F 29 03 06 POKE (03) 2009/05/23 09:16:24 : [iNST-SRX ] 02 50 07.98.0F 0F.D4.07 2B 29 03 POKE (03) 2009/05/23 09:16:25 : [standard-Direct Ack][07.98.0F-->ISY/PLM Group=0] Max Hops=3, Hops Left=2 2009/05/23 09:16:25 : [0A.31.0A.1] Finish : Adding to scene 'Kitchen Main Lights' was Successful 2009/05/23 09:16:40 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00) 2009/05/23 09:16:40 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:40 : [ A 31 A 4] DON 0 2009/05/23 09:16:40 : [ A 31 A 4] ST 255 2009/05/23 09:16:41 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00) 2009/05/23 09:16:41 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:41 : Duplicate: ignored 2009/05/23 09:16:41 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00): Process Message: failed 2009/05/23 09:16:41 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:41 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 41 11 04 LTONRR (04) 2009/05/23 09:16:41 : [standard-Cleanup][0A.31.0A-->ISY/PLM Group=4] Max Hops=1, Hops Left=0 2009/05/23 09:16:42 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00) 2009/05/23 09:16:42 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:42 : [ A 31 A 4] DON 0 2009/05/23 09:16:42 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00) 2009/05/23 09:16:42 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:42 : Duplicate: ignored 2009/05/23 09:16:42 : [iNST-SRX ] 02 50 0A.31.0A 00.00.04 C7 11 00 LTONRR (00): Process Message: failed 2009/05/23 09:16:42 : [standard-Group][0A.31.0A-->Group=4] Max Hops=3, Hops Left=1 2009/05/23 09:16:43 : [iNST-SRX ] 02 50 0A.31.0A 0F.D4.07 41 11 04 LTONRR (04) 2009/05/23 09:16:43 : [standard-Cleanup][0A.31.0A-->ISY/PLM Group=4] Max Hops=1, Hops Left=0
Michel Kohanim Posted May 24, 2009 Posted May 24, 2009 danswatman, Thanks so very much. I should be happy that we found the problem but this is not good news since some of the RLs actually do not respond to i2 commands even though they report i2. Would you be kind enough to: 1. Let me know firmware version as ISY reports it 2. Please make sure you go back to the automatic mode when you are done programming your RLs With kind regards, Michel
danswatman Posted May 24, 2009 Posted May 24, 2009 Not sure what you mean by firmware revision isy reports it..??. it says v.00 when the RL is selected but so does my old RL. The RL does program in that special mode you mention which leads me to believe that once the isy knows the device is an i2 the isy is able to program the RL fine. Cheers, Dan
Michel Kohanim Posted May 25, 2009 Posted May 25, 2009 Hi Dan, Thanks so very much. I am sorry for the confusion, I was referring to the label on the RL. Unfortunately the solution is not that simple since communications modes are not per device but per ISY. i.e. Device Reported makes ISY use device reported settings for all devices. If we are lucky, this would work OK but we cannot count on luck. With kind regards, Michel Not sure what you mean by firmware revision isy reports it..??. it says v.00 when the RL is selected but so does my old RL. The RL does program in that special mode you mention which leads me to believe that once the isy knows the device is an i2 the isy is able to program the RL fine. Cheers, Dan
danswatman Posted May 25, 2009 Posted May 25, 2009 ok the label on the RL say 1.1 on the same label as the address, look new also because its a sticker on top of the existing label. This is again a new RL I just received.
Michel Kohanim Posted May 26, 2009 Posted May 26, 2009 Hello danswatman, Thanks so very much for the update. I have reported it to SH ... hopefully they'll be able to clarify it soon. With kind regards, Michel ok the label on the RL say 1.1 on the same label as the address, look new also because its a sticker on top of the existing label. This is again a new RL I just received.
Jim G Posted June 29, 2009 Posted June 29, 2009 Hi, I just had a problem adding a new 2420M and kept getting the following errors: [-200000]Node not added-failed removing links[11 9F 17 1] [-200000]Failed writing the highwater mark[n/a] I just added a 2466SW ToggleLinc with no issues, so at first I thought I had a bad 2420M, but resolved the problem by disabling the climate module then adding the 2420M. Once the device was added I could enable the climate module and add the sensor to new scenes and programs with no further issues. Any ideas what is going wrong? Thanks, Jim Failed device add: ----------------------------- 2009/06/29 15:43:04 : ---- Initializing the linked devices ---- 2009/06/29 15:43:04 : ---- All Linked Devices are now initialized ---- 2009/06/29 15:43:04 : ---- Add remaining devices ---- 2009/06/29 15:43:04 : [ 11 9F 17 1] Removing all links 2009/06/29 15:43:04 : [11 9F 17 1] Querying engine version 2009/06/29 15:43:04 : [iNST-ACK ] 02 62 11.9F.17 0F 0D 00 06 (00) 2009/06/29 15:43:04 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 0D 01 (01) 2009/06/29 15:43:04 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 15:43:04 : [11 9F 17 1] Retrieved engine version is i2 2009/06/29 15:43:04 : [11 9F 17 1] Calibrating engine version ensuring support for i2 2009/06/29 15:43:04 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:05 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 15:43:05 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 15:43:05 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 15:43:05 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 15:43:05 : [] Using engine version i2 2009/06/29 15:43:05 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:07 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 15:43:07 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 15:43:07 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 15:43:07 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 15:43:07 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:07 : CLI-WBug: Connecting to http://datafeed.weatherbug.com/GetXml.a ... UnitType=0 2009/06/29 15:43:07 : CLI-WBug: Successfully Processed WBug Response 2009/06/29 15:43:08 : [MOD 2 2 1] 000F2AD0 Weather/Temperature = 99.4 °F 2009/06/29 15:43:08 : [MOD 2 2 5] FFFFDCD8 Weather/Temperature Rate = -0.9 °F 2009/06/29 15:43:08 : [MOD 2 2 7] 00000000 Weather/Humidity Rate = 0 2009/06/29 15:43:08 : [MOD 2 2 10] 00099CF0 Weather/Dew Point = 63 °F 2009/06/29 15:43:08 : [MOD 2 2 11] 00004E20 Weather/Wind Speed = 2 mph 2009/06/29 15:43:08 : [MOD 2 2 13] 0000C350 Weather/Wind Direction = E 2009/06/29 15:43:08 : [MOD 2 2 14] 0000C350 Weather/Wind Average Directi = E 2009/06/29 15:43:08 : [MOD 2 2 18] 0000EE48 Weather/Light = 6.1 2009/06/29 15:43:08 : [MOD 2 2 19] FFF82448 Weather/Light Rate = -51.5 2009/06/29 15:43:08 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 15:43:08 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 15:43:08 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 15:43:08 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 15:43:08 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F FF 08 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:17 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F FF 08 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:26 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F FF 08 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 15:43:30 : [ 11 9F 17 1] ** Not added ** Remove Device Links failed 2009/06/29 15:43:30 : ---- All Remaining Device Added ---- ----------------------------- Successful device add: ----------------------------- 2009/06/29 16:40:58 : ---- Initializing the linked devices ---- 2009/06/29 16:40:58 : ---- All Linked Devices are now initialized ---- 2009/06/29 16:40:58 : ---- Add remaining devices ---- 2009/06/29 16:40:58 : [ 11 9F 17 1] Removing all links 2009/06/29 16:40:58 : [11 9F 17 1] Querying engine version 2009/06/29 16:40:58 : [iNST-ACK ] 02 62 11.9F.17 0F 0D 00 06 (00) 2009/06/29 16:40:58 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 0D 01 (01) 2009/06/29 16:40:58 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:40:58 : [11 9F 17 1] Retrieved engine version is i2 2009/06/29 16:40:58 : [11 9F 17 1] Calibrating engine version ensuring support for i2 2009/06/29 16:40:58 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:40:59 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:40:59 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:40:59 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:40:59 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:40:59 : [] Using engine version i2 2009/06/29 16:40:59 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:00 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:00 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:00 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:00 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:00 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:01 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:01 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:01 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:01 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:01 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F FF 08 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:02 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:02 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:02 : [ 11 9F 17 1] Adding device to ISY t=10.01.0000 2009/06/29 16:41:02 : [11.9F.17-Sensor] Start : Adding device to ISY 2009/06/29 16:41:02 : [11.9F.17-Sensor] Finish : Adding device to ISY was Successful 2009/06/29 16:41:02 : [11 9F 17 1] Querying engine version 2009/06/29 16:41:02 : [iNST-ACK ] 02 62 11.9F.17 0F 0D 00 06 (00) 2009/06/29 16:41:03 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 0D 01 (01) 2009/06/29 16:41:03 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:03 : [11 9F 17 1] Retrieved engine version is i2 2009/06/29 16:41:03 : [11 9F 17 1] Calibrating engine version ensuring support for i2 2009/06/29 16:41:03 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:03 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:03 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:04 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:04 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:04 : [11.9F.17-Sensor] Making PLM a Responder to group 1 2009/06/29 16:41:04 : [MNG-LNK-RSP ] 02 6F 41 A2 01 11 9F 17 10 01 00 06 2009/06/29 16:41:04 : [11.9F.17-Sensor] Using engine version i2 2009/06/29 16:41:04 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 12 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:04 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=2, Hops Left=0 2009/06/29 16:41:04 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:05 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:05 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:05 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F FF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:05 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:05 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F FF 08 E2 01 0E D9 8A 00 00 01 00 06 (00) 2009/06/29 16:41:06 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:06 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:06 : [11.9F.17-Sensor] Making PLM a Responder to group 2 2009/06/29 16:41:06 : [MNG-LNK-RSP ] 02 6F 41 A2 02 11 9F 17 10 01 00 06 2009/06/29 16:41:06 : [11.9F.17-Sensor] Using engine version i2 2009/06/29 16:41:06 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F F7 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:08 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:08 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:08 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F F7 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:08 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:08 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F F7 08 E2 02 0E D9 8A 00 00 01 00 06 (00) 2009/06/29 16:41:09 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:09 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:09 : [11.9F.17-Sensor] Making PLM a Responder to group 3 2009/06/29 16:41:09 : [MNG-LNK-RSP ] 02 6F 41 A2 03 11 9F 17 10 01 00 06 2009/06/29 16:41:09 : [11.9F.17-Sensor] Using engine version i2 2009/06/29 16:41:09 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 00 0F EF 01 00 00 00 00 00 00 00 00 00 06 (00) 2009/06/29 16:41:10 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:11 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:11 : [iNST-ERX ] 02 51 11 9F 17 0E D9 8A 11 2F 00 00 01 0F EF 01 00 00 00 00 00 00 00 00 00 2009/06/29 16:41:11 : [Extended-Direct][11.9F.17-->ISY/PLM Group=0] Max Hops=1, Hops Left=0 2009/06/29 16:41:11 : [iNST-ACK ] 02 62 11.9F.17 1F 2F 00 00 02 0F EF 08 E2 03 0E D9 8A 00 00 01 00 06 (00) 2009/06/29 16:41:11 : [iNST-SRX ] 02 50 11.9F.17 0E.D9.8A 27 2F 00 (00) 2009/06/29 16:41:12 : [standard-Direct Ack][11.9F.17-->ISY/PLM Group=0] Max Hops=3, Hops Left=1 2009/06/29 16:41:12 : [11.9F.17-Dusk/Dawn] Start : Adding device to ISY 2009/06/29 16:41:12 : [11.9F.17-Dusk/Dawn] Finish : Adding device to ISY was Successful 2009/06/29 16:41:12 : [11.9F.17-Low Bat] Start : Adding device to ISY 2009/06/29 16:41:12 : [11.9F.17-Low Bat] Finish : Adding device to ISY was Successful 2009/06/29 16:41:13 : [ 11 9F 17 1] Device added to ISY 2009/06/29 16:41:13 : ---- All Remaining Device Added ----
Michel Kohanim Posted June 30, 2009 Posted June 30, 2009 Hello Jim, I do not think this has anything to do with your WB module but, based on the event viewer, it seems that your MS went out of programming mode (does not hear INSTEON traffic anymore). Usually all Radio devices have a 4 minute programming mode timeout. It seems that your MS timed out and that's why it didn't respond to ISY's 3 retries. With kind regards, Michel
Jim G Posted June 30, 2009 Posted June 30, 2009 Hello Jim, I do not think this has anything to do with your WB module but, based on the event viewer, it seems that your MS went out of programming mode (does not hear INSTEON traffic anymore). Usually all Radio devices have a 4 minute programming mode timeout. It seems that your MS timed out and that's why it didn't respond to ISY's 3 retries. With kind regards, Michel Hi Michel, So then it looks like the MS could be defective? To confirm the problem, I just removed the MS and attempted to add it back. With WB enabled and polling set at the default 60sec, the MS failed when WB polled during the MS linking. I then set the WB polling to 300sec, initiated the add and the MS was added, since no WB polling occurred within the 1min 3sec it took to add the MS. Both times I made sure to set the MS in link mode just before starting the ISY link to stay within the 4min window. I appreciate the help. I'm in the learning stages with the ISY-99i and Insteon devices, so I welcome all the advice I can get! Thanks, Jim
Michel Kohanim Posted June 30, 2009 Posted June 30, 2009 Hi Jim, Just to test your scenario, I tried reproducing this problem with ISY firmware 2.7.5 and it worked fine. What ISY firmware are you using so that at the least we have the correct baseline? With kind regards, Michel
Jim G Posted June 30, 2009 Posted June 30, 2009 Hi Michel, I'm on ISY firmware 2.7.5 and the MS is rev1.1. I'm going to order another MS to try before sending this one back. Thanks, Jim
Michel Kohanim Posted June 30, 2009 Posted June 30, 2009 Hi Jim, Thanks so very much. Please do keep us posted. With kind regards, Michel Hi Michel, I'm on ISY firmware 2.7.5 and the MS is rev1.1. I'm going to order another MS to try before sending this one back. Thanks, Jim
Jim G Posted July 8, 2009 Posted July 8, 2009 Hi Michel, I just received 3 more 2420M sensors. All 3 MS units fail to add when the climate module is running. If I disable the modules or set polling so it does not occur during the add window, everything works fine. If the climate module polls during add it fails. Only thing common I noticed on the MS units is the 4 digits in front of the rev.1.1 are "0909". Are these the production code? Any ideas? Do you need me to send you one of the MS units? Thanks, Jim
Recommended Posts