io_guy Posted March 6, 2019 Posted March 6, 2019 Anyone try one of these with the ISY yet? I'm going to give one a try for my garage door openers. Very small, cheap, S2 security, 2 INs, 2 Outs, built-in temp sensor... 2
adamthp Posted March 6, 2019 Posted March 6, 2019 That little sucker is cool. I'd love to hear how it goes with the ISY!
asbril Posted March 6, 2019 Posted March 6, 2019 (edited) https://www.fibaro.com/en/products/smart-implant/ Very interesting but how does it really connect (install) in existing equipment ? Edited March 6, 2019 by asbril
glacier991 Posted March 6, 2019 Posted March 6, 2019 (edited) Just as a Z wave enabled "hub" for 6 DS18b20 temp sensors opens up a lot of Interesting possibilities! Edited March 6, 2019 by glacier991 Typo
MWareman Posted March 7, 2019 Posted March 7, 2019 Don’t think you can get them yet. Also, how cheap is ‘cheap’. I want some...
Jimbo.Automates Posted March 7, 2019 Posted March 7, 2019 FIBARO FGBS-222 US Smart Implant, Enabled Universal Binary Sensor, Z-Wave https://www.amazon.com/dp/B07NDRCTJKLooks like $52 on Amazon, few bucks less other placesSent from my Pixel 3 XL with Tapatalk 1
Rocketron Posted September 19, 2019 Posted September 19, 2019 Bought one to work with the DS18B20 temperature sensors. Plan at the moment is to hook up two sensors to the pipes leading to the showers. Will trigger the bathroom fan to run and shutdown. First attempt to get it to work on my desk next to me didn't go well. No temperature other than the internal. Wired up correctly. Ok read the instructions.... Attach the temperature sensors, then include the unit to the ISY. Worked like a charm for the single sensor I have attached. I suspect adding more sensors will require excluding and including. Will update as I work toward the install. 3
tomd130 Posted October 26, 2019 Posted October 26, 2019 I am trying to get a Fibaro FGBS222 running with 4 DS18b20 temperature probes. I've successfully included the unit to the ISY but I dont see 4 temperatures. Any clues?
tomd130 Posted October 27, 2019 Posted October 27, 2019 Got it working with 4 sensors. The hair-like wires that come out of the Implant are difficult to work with. I had a bad connection going the the 4 sensors. After excude and include it looks great. ZW004.7 is the device internal temp, and 4.8 thru 4.11 are the 4 temp probes. This is going to be a very useful device!!!!
Rocketron Posted October 22, 2020 Posted October 22, 2020 Back in September of last year I reported I was using one of these smart implants. It worked well for a while but then began not working. I spent a long time trying to figure out why it stopped functioning. I had added a temp probe (DS18B20). It wouldn't report updates without me manually querying it. I tried replacing the temperature probe. That send me off in the wrong direction. Apparently these are well known to have many fakes being produced. Only a small percentage can be relied to work out of the box. Once I'd figured that out, I bought another smart implant with better temp probes. Well it doesn't work either. I've come to the conclusion that at somepoint an upgrade to the ISY changed how these report (or don't report). Are others experincing this problem? Parameters 67 and 68 change how the unit reports and I've changed those many times on both units I now have. Still the ISY will not accept the updates to the temp probe. Is there a fix? What am I missing?? I'm running FW 5.3.0
rodgetk Posted November 13, 2020 Posted November 13, 2020 I have the exact same issue. No automatic updates, I have to Query it for it to update temperature. I also run FW 5.3.0, and have one DS18B20 attached to it.
Recommended Posts